AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Mikey_ax

Budding Enthusiast
  • Content count

    13
  • Joined

  • Last visited

About Mikey_ax

  • Rank
    Member

Contact Methods

  • First Name Mikael

Profile Information

  • Gender* Male
  • Ford Model Ford focus MK21.8FFV
  • Ford Year 2007
  • UK/Ireland Location Other/NonUK
  • Annual Mileage 10,001 to 15,000
  1. Hejasn! YES!!! The cruies control is working now. many thanks to all who have helped me. Sincerely, Mikey
  2. What do I do first? and how do I do that?
  3. I have looked for the brown and the white cable into the connector 103 and they are there. Which fuse go to cruise control. I read somewhere that someone had bypassed the fuse box somehow but now I can not find it anymore.
  4. Hello! Made two films on how I do when I try to activate the CC. What am I doing wrong or what is wrong? Test CC buttons. http://youtu.be/uYB6da11Z3g 100 %ELMComfig 0.2.13http://youtu.be/z1nO3Q5q2fQ
  5. Okay how do I do it in the PCM? What is it to be done. I use ELMcomfig 0.2.13. Thanks for Following home lights tip, I'll check up there.
  6. Hello there. Now I have managed to get MS can communicate with the program. I check the box for the cruise control at the GEM and HEC. and then I pressed writhe to GEM and then to the HEC. Have been out for a test drive but nothing happens. Am I missing something or did I forget to do something? The only thing I have managed to get is the Trip computer - instent fuel consumption. Just one thing to have someone or know someone how to get Ford Focus Follow Me Home light to act as in the movie in the link below. http://www.youtube.com/watch?v=25SrWR1MJJw
  7. Hello again! Now I have tried some more and exchanged on cable 14 and 6 were not good. It looks like I can read all the information in the HS-can part. But not in MS-can, then I just diplsays incorrect response from ELM to request "10 87"
  8. Yes I know why should I have the middle position OFF. yes will probably never use it? Then it should go just as well with an ON-ON No, mine is a 1.8 etanlo
  9. Hello again! Will now try swapping the cable 14 and 6. we'll see if that helps. The only thing I can think of that I have ancestry Lund is that I have a 2-pole ON-ON button. I have read that people use a 2-pole ON-OFF-ON switch. But what's different?
  10. I have now I try to solder on cable 11 and 3. got the results. I have instalera Silabs program and am using ELM Config 0.2.1.3 I have just this program So far so good! Then when I press the read to see the information in the GEM it just looks like this. Have tried to switch between High speed and low speed. then when I press the read to see the information in the GEM Page3, I get error messages. see the picture. what's wrong? or what am I missing? My numer on the fuse box is 4M5T-14A073-CH. The box sits on the passenger side on the floor.
  11. Yes, I've tried switching to High Speed​​. I've also tried with the program ELM FF2 v0.9.4.13. The program I get contact with the car but when I try to activate the cruise control it does not work afterwards. I'll try swapping the cable 11 and 3 in the OBD and see if it works. Yes I have instalera drivers for the device. I use a computer with windows 7 64bit Professional
  12. Hello! I'm new here and have also tried to get the cruise control on my Ford Focus 1.8 FFV work. I mount all things in the car but when I use ELMconfig 0.2.10 and read information from the car so I just get an error message (ELM incorrect response from ELM to request "10 87") What's wrong? I have double checked all my soldering ELM OBD everything looks right as it should.
  13. Hello! I'm new here and have also tried to get the cruise control on my Ford Focus 1.8 FFV work. I mount all things in the car but when I use ELMconfig 0.2.10 and read information from the car so I just get an error message (ELM incorrect response from ELM to request "10 87") What's wrong? I have double checked all my soldering ELM OBD everything looks right as it should.