• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


hailesy

Budding Enthusiast
  • Content count

    3
  • Joined

  • Last visited

About hailesy

  • Rank
    Newbie

Profile Information

  • Ford Model
    Fiesta MK6 1.25 Style
  1. My Poor Fiesta MK 7 57 plate bumped into another car on a roundabout yesterday. Obviously my fault and on looking at the damage - number plate smashed, stress cracks on bumper and and bonnet slightly damaged on one side. Structure of the Car seems okay. I'm guessing I'll need a new Bumper and Bonnet and both would need to be sprayed Metallic. What sort of cost am I looking at? Cheers, Mark
  2. Took my Car to Halfords for a Air Con Check. There's a Air Con Valve next to the Air Con Compressor but they reckon there should be another one somewhere under the bonnet as the Gauge Reader Valve didn't fit? Does anyone know if there is another Air Con Valve Port somewhere in the Car? :) Cheers, Mark
  3. Good Evening All, First of all my first post on this wonderful forum - so please be gentle and hello to everyone :) So down to the query I have: I Went to Tesco's Car Wash today and my car is lovely and clean. However, when I got home to get the shopping out of the boot I noticed half the red housing has broken off the rear high brake light exposing the light strip behind. So, I rang up the dealership to see how much a new red panel would be. They checked and stated the whole unit would need replacing. I nearly fainted when they quoted £61 + vat and this didn't include fitting! Looking on ebay I see you can get replacements LED clear brake light for as little as £30. What I would like to know how hard are these to fit (they state its simple) and does anyone have a step by step guide on how to do this? I would be very grateful if anyone can help. Many thanks, Mark