Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About Monz87

  • Rank

Contact Methods

  • First Name

Profile Information

  • Ford Model
    S-Max 2.0 TDCI Titanium Manual
  • Ford Year
  • UK/Ireland Location
  • Annual Mileage
    0 to 5000
  1. Thanks guys, I've actually done it, just needed to pull the handbrake higher as you've said, was really simple, can't believe I was messing about so much the first time. But now having such difficulties wrapping it with the carbon fibre vinyl, even with a heat gun, the middle bit in the sides is too hard!
  2. You can't actually close the vents in the middle row, you can just adjust it from the bottom vent to the top vent.
  3. I tried though, but how much can I take it up, I heard these cables are prone to snapping. I pulled quite hard and it still wouldn't come through but don't wanna pull much harder incase it snaps ...? Sent from my iPhone using Ford OC
  4. cheers, will doSent from my iPhone using Ford OC
  5. I have the dual zone rather than the triple zone and it seems that you cannot have the rear blowers set to off, so it should always be coming out when the fans are on, but nothing still comes out the middle row blowers..?
  6. Well that takes me to a page where I can select trim parts, but when I click the show prices it goes to a foreign page which basically doesn't find anything..? But I need to know how to take my existing trim out...
  7. nope, keeps getting caught on the lever and not just for a tiny bit either :(Sent from my iPhone using Ford OC
  8. I've tried all different fan settings and adjusted the fans by the blowers in the middle row, I can't get any heat or cold out of these, the front ones work perfectly but nothing from the middle row, any ideas guys?
  9. The piece under the handbrake lever is scratched so I thought i'd wrap this bit with carbon fibre wrap. So I managed to take it off but can't get the damn thing out because of the handbrake lever, it does't pass through, gets blocked. So I thought i'd try to take off the handle bit of the handbrake lever, can't even take the damn thing off! I can pry off the side facing the centre console of the top cover on the handle but the other side I can't take off. Who knows even after I open the top bit if I can take the whole handle off to pass the trim through. Any ideas guys? Sent from my iPhone using Ford OC
  10. Oh I didn't know that, it obviously isn't made of hard plastic then, must be a soft material Sent from my iPhone using Ford OC
  11. Really? So even if you bought a brodit mount and holder, you would have to drill holes in it? Sent from my iPhone using Ford OC
  12. That makes sense, but as per my picture above, there is no screw holes on the brodit mount?
  13. Don't mean to sound dumb, but all the universal holders are either suction cup ones or vent holders, I can't see how I would put screws through the back of them onto the brodit mount...
  14. But can you show me an example of a holder that would fit like on ebay or something Sent from my iPhone using Ford OC