tractorboi711

Budding Enthusiast
  • Content count

    9
  • Joined

  • Last visited

About tractorboi711

  • Rank
    Newbie

Contact Methods

  • First Name
    Rory

Profile Information

  • Ford Model
    Fiesta 1.4TDCI
  • Ford Year
    2002
  • UK/Ireland Location
    Suffolk
  • Annual Mileage
    0 to 5000
  1. Hi I've had the airbag warning light on constantly on my dash for a few months. It started after I had a battery collapse, got a new battery installed it and the light came on , first thing someone told me was to change the airbag module as I had tried to jump the car with the old battery in then I tried to use a tractor battery booster to get it to go, the bloke thought I may of fried the module. So I changed the module but the light still came on. Next thing I was told was to check the connectors under front seats but I don't appear to have any, I have taken of the bottom of the seat to check. Is there anything else I can try to do to get rid of this warning light ? Sent from my iPhone using Ford OC
  2. Installed an alpine amp fed of an RCA converter that was wired to the rear speakers today and I am actually very surprised! The bass does not distort at all on the stock 4500 head unit. Sent from my iPhone using Ford OC
  3. Ok thanks , what colour cable would I be looking for that comes out if the stock head unit ? Sent from my iPhone using Ford OC
  4. So I connected the remote wire from my amp to the audio fuse but the amp turns on even when the radio is not turned on and neither is the ignition. I also tried to put the wire in the fuse for the ignition but it did the same thing . How can I get it to turn on only when the radio does? don't really want to have to take the facia off again as it was a pig to put back! Sent from my iPhone using Ford OC
  5. Had a quick go on photoshop. Tinted, lowered, alloys, debadge and painted bumper. What do you think !? Sent from my iPhone using Ford OC
  6. Thanks a lot ! I've heard that the quality from RCA converters on the stock head unit is pretty shocking. Would I be better of just changing the hu out than splicing all the cables up ? Sent from my iPhone using Ford OC
  7. I want to get at the rear speaker cables so I can splice them to an RCA converter, but not sure how to remove this panel and I don't want to break it off ! Sent from my iPhone using Ford OC
  8. Removed the radio facia but can't seem to get the 'lead' from the dial that selects which vents the air comes out to the socket which seems to be in the most awkward place. Sent from my iPhone using Ford OC