AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


martinctb

Budding Enthusiast
  • Content count

    7
  • Joined

  • Last visited

About martinctb

  • Rank
    Newbie

Contact Methods

  • First Name
    Martin

Profile Information

  • Ford Model
    focus 1.8
  • Ford Year
    2010
  • UK/Ireland Location
    Lincolnshire
  • Annual Mileage
    10,001 to 15,000
  1. Systems all reading fine just wont write IDS automatic so is Elmconfig for Comms port and speed
  2. Hope someone has a contact, im trying to get a replacement/ re-manufactured PCM for my 2010 Ford Focus 1.8 Petrol, todate every ECU repairer has come back with cant help, its looking more and more like ill have to go to Ford unless someone knows a company that can help details of vehicle below. sScondhand one currently on car (7M51-12A650-VC) but unable to programme to car (ERROR) using IDS or Elmconfig VIN: WF0PXXWPDPAS37337 FORD FOCUS 1.8 PETROL 2010 REPLACEMENT FORD Part Number: 1712930 (7U71-12A650-LA)
  3. Finally got the modified elm327 have tried elmconfig today went to configuration in the PCM manually entered all the data but how do you write this data to the PCM, i see on the next tab there is a update firmware tab but this isnt highlighted nor is the write to PCM tab in this section
  4. Tried the method using the IDS and when i come to installing the new PCM it comes up with ERROR 102-oxo 851082, then when i come out of that its says (The operation can not begin because the PCM failed to complete a service procedure. Perform PCI to resolve issue). Hence i need to install As Built data in PCM. Do you know where there is an idiots guide to the ELM327 route
  5. Hope there is a tech who can help, im trying to reprogramme the PCM on my 2010 Focus with the As Built data reason when i try to do a new install it fails and tells me to do a PMI. I have IDS but when i go into the Programming section then click As Built there is no pull down for PCM. Can anyone shed light on this and how i do it.
  6. Thanks but that seems only for focus 2011 on MK3, mine is a 2010 March
  7. Just putting a 2010 focus back on the road and i need the as Built data to reprogramme the PCM does anyone know were i can get these from.
  8. Welcome to the Ford forums martinctb :)

    If you get stuck on how to post a question on the forums or trying to message a member then check out our video guides to help you get started!

    http://www.fordownersclub.com/forums/forum-0/announcement-47-how-to-use-our-forum-video-guides/