AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


andybr

Budding Enthusiast
  • Content count

    2
  • Joined

  • Last visited

About andybr

  • Rank
    Newbie

Contact Methods

  • First Name
    Andrew

Profile Information

  • Ford Model
    Focus
  • Ford Year
    2006
  • UK/Ireland Location
    Ayrshire
  1. I have purchased 4 injectors for the below car..... the injectors were taken from a 1.8 tdci KKDA (2008) focus My car is the following Build Date: 26.07.2006 Vehicle Line: Focus 04-08/Focus C-MAX 03-07 Body Style: 4 Door Estate Version: Series 15 Engine: 1.8L Duratorq-DI HPCR (115PS) Lynx Transmission: 5-Speed Manual Trans - MTX75 My injectors and donor injectors are 4M5Q-9F593-AD From what i have read after purchasing there was a different version of the KKDA engine with a higher compression ratio. are they different injectors, would i be ok as long as both injectors are the same serial number????
  2. Juddering Focus mk2 Tdci

    Hello Have a mk2 focus tdci Engine code KKDA I have a very apparent engine judder and poor idle....sounds like its only firing on 3 . I looked at the injectors and cyl 3&4 look like new injectors, i used a long screwdriver to listen to all injectors when ticking over and the new injector are ticking nice and loud and tick very fast....however number 1 and 2 look like old injectors and appear to be ticking very slow and quiet. injector one sounding very quiet. injectors are 4M5Q-9F593-AD. Would this be a good indication that i have 2 faulty or blocked injectors. i have seen injectors on ebay with the 4 digit codes starting with a 1 but my injector numbers are as follows 51980 - fg19 51976 - fg19 51984 - fg19 51988 - fg19 Would i be correct in thinking that i could get any 4M5Q-9F593-AD injector for the KKDA regardless of codes and also without the need for coding afterwards. Many Thanks