Hi there, The best thing to do in this case is to fit an inline switch on the lead to your docking station, This way you are not changing any of the original wiring of the car. Also, if you were to move the docking station to another vehicle or power point, you can still use the same switch. I recommend connecting the switch in line with the negative feed, just snip one of the two wires on the lead and feed it through the switch. However, these in line switches are harder to find then a standard PTM (PUSH to MAKE) switch, so, you could purchase one similar to this: http://www.maplin.co.uk/module.aspx?Module...y=13m5#overview from your local maplin store. Drill a 12.2mm hole and pop it in your dash, wire the negative feeding to the cig lighter through the switch and back to the lighter. I would recommend mounting the switch out of sight as to not deface the car. One last thing is i dont recommend any of this, so you do so at your own risk. It would be far easier to unplug it!