AdBlock WarningParts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.
Search the Community
Showing results for tags 'Puddle Light'.
Found 2 results
Lenny posted a topic in Ford Focus GuidesHi all, I've searched the internet to find a guide or some sort of information on fitting these ford logo projector puddle lights to the focus Mk2 & Mk2.5 but I've found nothing, So I've decided to do something about that and here we are. Shopping list: 3Amp cable purchased from AutoStar electronics aswell as tape, purchasing as many items as possible from the same seller saves money on postage and Dave is top man at AutoStar, my number 1 supplier through out all of my Guides. http://www.ebay.co.uk/itm/170492569100?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 4 x Small Spade connectors Male 4 x Small Spade connectors Female 1 x Roll PVC electrical tape http://www.ebay.co.uk/itm/FLAME-RETARDANT-Electrical-PVC-Insulation-Tape-19mm-20m-/180483586959?pt=UK_Motorcycle_Parts&hash=item2a05a8fb8f 1 x Roll Nylon tape . http://www.ebay.co.uk/itm/Self-Amalgamating-Wiring-Harness-Loom-Tape-10m-19mm-/170481825847?pt=UK_Motorcycle_Parts&hash=item27b1823837 1 x set Ford Logo projector puddle lights Purchased from Tom at Bad Boy Classics these units are the 4th Generation model of the puddle lights as result they contain Cree 5w bulbs which are led and high quality 6000kelvin white aswell as low power consumption, worth every penny, http://stores.ebay.co.uk/BB-classics/LED-Ghost-Shadow-Lights-/_i.html?_fsub=5159417014&_sid=300023934&_trksid=p4634.c0.m322 Tools Required: Not sure yet the size of the Allen key will be required to roatate the angle of the logo on the lens of the projector unit. So I'll remove either image once I receive the projector lights, Electric Drill, Dremal or small drill bit for electric drill will do the same job Stanley blade Socket wrench Socket reduicer Socket extension 8mm Socket 10mm Socket Cable cutters Flat head screwdriver PVC electrical tape Nylon tape Hammer Long nose pliers 3/32 Allen key There are many bolts to be removed but most require a 10mm socket with extension I'd recommend taping the 10mm socket on to the extension because it can fall in to the door cavity when removing the bolts.
Lenny posted a topic in Audio & ElectronicsI really have to get myself two sets of these, fit under the doors and shine the ford logo in full colour on to the ground when the door is opened. :o Quality!! http://www.ebay.co.u...5950%26_rdc%3D1 also see here: http://www.aliexpres...e-shipping.html