AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Search the Community

Showing results for tags 'forums/Chrome+front+grille'.

Found 54 results

  1. DTRL and front parking sensors

    Hi guys   Picking up my 12-plate Titanium Focus tomorrow, just wondering if any of you have any suggestions regarding fitting front parking sensors (colour-coded) and Daytime Running Lights (the ones in the headlights, not the grill). I'm not doing it myself!! I'm looking for someone in South Wales to do it for me professionally, somewhere near the Aberdare area but anywhere between Cardiff and Swansea would be fine. If you know of someone I could get a quote from, or have any ideas, itd be very much appreciated!   Thanks!! Jody
  2. Has anyone successfully put a facelift (mk7.5 ) front onto a prefacelift fiesta (mk7)? My question is what parts would I need and how to go about the DRL'S. Also were there any issues or anything else that I should know?  I know it's an expensive job as so far the only advice I have managed to find is that financially it's not worth it. I'm still going ahead with this so any advice would be much appreciated.  
  3. Evening Everybody. I hate only joining a forum to ask a question but I am looking for some advice with my 2007 (57) Focus. Wife went out in the car yesterday morning and the front wipers are no longer working - I immediately assumed that it was either the fuse or the linkage (my old Punto back in the day constantly had wiper issues). So far I have checked the fuse (Fuse 129 iirc) and it appears to be fine, I have checked and I am getting just under 12v output from the wiring loom (11.9v) and checked for any visible signs of damage/water ingress on the loom but couldnt see anything. I have tried two replacement motors from a local breakers but neither worked - the exact same as before. When I attempt to run the wipers I can hear the fuse box making the "ticking noise" that I would expect. Other functions from this stalk appear to be working without issues (rear wipers and front water jets) and all other electricals are working from what I can tell. I have had a look through the forums and it appears that people have had this issue with various different sources of the problem and hoping somebody may be able to assist with troubleshooting further. We have been discussing upgrading to Mondeo in the next month or so and really want to avoid spening cash on the car. Thanks Mark
  4. So, I just bought my third Ford in a row (second Focus). Had the choice of a 15 plate with 10 miles on the clock or a 64 plate, 1 user, 3,000 miles but every safety feature under the sun included. I went for the 15 plate but now wondering whether it would be possible to have some of the safety features included on the other car to be installed on mine, or whether that has to be done on manufacture. I have a Titanium with active city stop, rear parking sensors and cruise control. Road sign and lane recognition and blind spot alerts would all be nice. I am wondering whether it is relatively easy to add on the features that use the forward facing camera behind my rear view mirror (ie whether it is just a case of updating the software used for the acitve city stop). I assume adding blind spot recognition would be pretty pricy as it would need side sensors and new wing mirrors? Does anyone have any experience of having such features installed by their dealer after purchase and the approximate cost?
  5. Hello all, great forum here that I've been reading for a while. We've recently purchased a 2012 Fiesta Edge which we really love, but I am in the process of fitting some parking sensors front and rear into the factory positions. I have no issues with the fitting of the sensors, or with vehicle electrics etc. as I've done this many times - but I want that factory look in our 'new' car. I've ordered the 'Front Parking Switch' and bezel from Ford and it is exactly what I need. I've even managed to work out which pins provide a momentary action to engage the parking sensors but for the life of me am unable to get the backlight or 'on' light to work on the bench out of the car. I'm led to believe the multiplug for this bezel (which can also house the ESP switch and Airbag Off light) is present in all Fiestas. I'm hoping when I take the dash apart tomorrow I will find this plug and plug it in - if anything to get the backlight working. But does anyone have any experience with getting the 'on' LED to work, I'm guessing this would normally activate a Ford Module for the factory sensors, but I still cannot figure out on the bench how it illuminates the LED, even following the PCB tracks under a magnifying glass. If anyone has done this before (I guess not as I did try searching) and can help in any way that would be great! :)
  6. Repairing Front Bumper

    I have damaged the the lower part of front bumper by hitting a raised kerb. The visible damage is not much but the underside looks a mess. Are there any pictures available showing the various parts of the complete bumper assembly?
  7. Hi All I have a shiny new Gord Galaxy Titanium Edition 2014. I have noticed that the front and rear headlamps always stay on when the ignition is on. It is supposed to have auto sensing headlights when is where the knob is set to. Even if I move the knob to manual "0" position, the lights still stay on. ( The dash lights go off in the position). I took it back to the dealer and was told those are the running lights but that sounds like nonsense to me. Anybody know if he's right, will I always have to drive around with my lights on? (and let me clear, they are not the small types of running lights, it is the main headlamps were talking about). There are loads of Galaxys on the road but I have not seen any with headlamps on during the day on any of them. Hope someone can shed some light (sorry, couldn't resist) Imran
  8. Chrome Strip Removal?

    Hi all, I have a 2013 Fiesta Zetec and I'm trying.to.remove the chrome trim from the boot lid above the number plate. I'm really struggling with it, if anyone has done it before or knows how to do it can you help me please? Pictures would be great. Thanks!
  9. Hi, New to the fiesta hype. started with a few little mods, deflectors,spoiler,miltek exhaust etc etc. purchased a 's' badge for the front radiator badge grille. i can see its held on by 3 clips at the top which are easy to remove. but the bottom 2 I'm struggling with. can anyone help. they are attached to the bumper. Thanks sam.
  10. Removing A Mk2 Front Wing

    Hi all, I've recently stripped back the sills on my car, treated the metal & resprayed (so far good) however on doing this it became obvious that the bottom section of the front RHS wing is 80% rust i.e. the part which the mud flap bolts through & is beyond being saved. I know replacement (pre-sprayed) wings can be purchased which my cause a minor colour mis-match due to UV fade etc, my question is does anyone have any idea how to remove the front wing? The Haines manual doesn't detail this process, I'm confident working on the car & am able to remove the arch liner. The only Youtube vids I could find for this are MK1's which may not have bolts etc in the same place etc.
  11. I've just finished rebuilding the front end - bumper, wings, various bits under the bonnet - on my Mk2 Focus. (It's taken two and a half years... ) I've got these things left over. I'm not too worried, but I'd prefer to know what they are :) It's possible that certain new parts I've bought already had them fitted without me noticing (e.g. a new bumper), in which case they're duplicates. Any ideas?
  12. Hi, Can anyone help? The driver's door of my 2001 Ford Focus is rather rusty at the bottom so I'm thinking of buying a replacement door and fitting it myself - it looks reasonably easy to do. However, what about the locks in the door? Do I need to somehow switch the locks from the old door into the replacement door? Or does the new door miraculously work with my old keys because the electrics tell it to? Thanks for any help. Ian
  13. Changing Front Grilles

    I'm trying to change the front upper and lower grill on my fiesta Zetec S 2014 ecoboost 1lt but not too sure exactly how to get the old ones off? Anyone have any idea? Thanks
  14. Hi all, I have a mk2 focus sport 1.8 tdci and I am at a loss and would like some advice. I have had a wobble / vibration on the front passenger side for over 6 months now and is very noticeable at low speeds and the steering wheel also wobbles. I have read a few posts and took on some of the suggestions but I have not had any luck in solving my problem. I have replaced the bearing including hub, it passed its not in January with no problems. I then replaced the drivers shaft, still no luck. I noticed that the tire was worn on the outside so today I took her to get a new tyre. I asked for the wheel to be put on the rear to see if it would help. I had all the wheels balenced and the alignment done and I am still facing the same problem. Does anyone have anymore ideas? thanks
  15. Hole Drilled In Grille Surround

    Hi all, Noticed something on my grille surround today (chrome part, mk2 Focus). Took a closer look and it seems someone has tried to drill a hole, almost dead centre below the Ford badge. Not sure why, surely too low to affect the bonnet lock etc. No other damage on the car!
  16. hi guys currently my bumper is standard and doesnt have place where to install fogs, so i wish to do a cover which can hold drls in them or some leds. can anyone point me to the right direction please? see pictures thanks
  17. front Led

    From the album My '08 S-Max Titanium

  18. Air Bags

    Hey hi there.. first post any way im needing both passenger and driver airbags...so far all i can find is for 2007 model. Anyone know if this will fit 2008 model reg eo58..and apparantly comes with everything needed...and is there anything else id need obviously garage will b fitting as computer etc will need reset. Thanks in advance paul.
  19. Hello people of the Ford Forum, I have a W reg 1.8 petrol Ford Focus Zetec. I've had it since September and I bought it in a car auction. The car is sound, it passed its MOT earlier this month albeit with a new brake cylinder on the o/s/r brake, but I cannot crumble as the car was cheap. My problem is that my alternator packed up the other day, it didn't give me any warning. The radio turned off, then the dash board lights started going. Not at any point did the battery light or any light other than the air bag warning light come on to give me notice. After calling out the AA I was told it was the alternator. So after buying a battery charger and charging the battery completely full I drove it with no heater, lights and radio to my local motor mechanic 20 miles from where I live. They have replaced the alternator but now the battery light stays on and the front windscreen heater does not work. The garage say they will sort it, but as I needed the car back I have to take it back when its convenient. I just wanted to know everybody's thoughts? Is it the alternator, a loose wire, what could it be? I'd appreciate any feed back so I can seem smart when I go back to the garage and tell them to investigate further.
  20. Hello,I have recently had a squeak from my front off side wheel. It has got progressively worse over time. It squeaks and whines heavily when you turn right and clunks when you turn left. There seems to be a bit of vibration in the track rod arm but the noise is a strange one. Any suggestions please?
  21. hi, im fed up with this 2002 mk1 focus 1.6 16v The airbag dash light didn't illuminate at start up, so I removed instrument panel to check bulb surprise someone had removed it! I tried a bulb and holder that I new worked but it will not light at start up. I have had it on diagnostic software and it only throws up B2227 front impact sensor which I will replace if I can fix this dam light otherwise it will fail MOT. I have checked continuity through the bulb holder and the printed circuit board only immediately around the bulb and seems fine. The airbag light has never worked since I got it but I didn't realise when buying dispite it had mot 2 days earlier hmm that gotta be dodgy since brake hose nearly through due to rubbing and not even mentioned. Any help on airbag light would be help full or any pointers? otherwise I will have to hide my son in footwell with a torch during mot.
  22. Guys and Girls, Please find attached my guide for replacing the upper front grille on the Ford Focus Mk2.5. This guide can be used for modifying to the ST grille or for direct replacement of your original grille. For those who wish to know, the FINIS number for the ST Grille is 1538478. Quote this at any ford dealer and they will confirm its an ST Grille. Please note, the bonnet lock mechanism is quite fragile and is known to break easily. This happened to me, and although i have included a fix in my guide, I cannot be held responsible for any breakages!! Happy Modifying! Upper Front Grille Replacement.pdf TDCiST
  23. Fiesta 6.5 Style

    My non-heated front screen needs replacing OK! Is there a upgrade kit or a way of fitting a Heated front screen? many thanks pete
  24. i want to spray paint them a different colour and i cannot find out how this is done, via youtube or other social media platform/ forum. can someone please help me many thanks. PS my fiesta is 2010 not the latest edition many thanks.
  25. St Brakes

    Hi there .I have a mark 1 phase 2 ford focus zetec 1.6 . Is it possible to fit the ST front (bigger ) discs and calipers to the existing hub carrier on a standard Focus set up ? I.E If i buy the parts will they bolt straight on. I've already ordered 17 inch alloys so wheel clearance isn't a problem and what about the front flexi brake pipe ?? I'm sure someone has done it somewhere . cheers dudes and dudettes