AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.

Search the Community

Showing results for tags 'forums/Upgrade+Filter'.

Found 86 results

  1. Hi All, Made two projects/builds on here before, nothing dramatic. Always wanted an ST and decided to get one as my insurance changed over at the end of January this year. Shoutout to TrustFord in Enfield for this! Was looking at trading in my Titanium for a new ST, then remembered the price difference. I then picked Stallone up for 13K with all the discounts and haggles etc taken down, only 8 months old! Comes with all the gadgets I had on the titanium, which I was used to (Auto lights, auto wipers etc.) but the heated seats etc. added to this just top it off! And then comes the power.. the torque it has is ridiculous, if you are in a position to get one of these, honestly.. just go for it. You won't be disappointed. List of things/idea's that I will/might be doing: 1. Upgrade all interior (courtesy, footwell, boot) 2. Upgrade number plate lights 3. Upgrade reverse lights (CREE LED)  need to add pictures 4. De-tango all indicators (rear, side and front lights) 5. Gel Overlays (Front, steering, boot badges, might do wheel centres and vents, ST Badges) 6. Smoke/Blackout lights/badges  sort of, will be re-doing these 7. Upgrade dipped beam to HID's 8. Upgrade Fogs to ??? 9. Black out alloys (plastidip or powder coat) 10. Induction Kit - J1 kit? 11. Colour coded pipes for engine (white/black) 12. Sunstrip 13. Hardwire a dashcam 14. Headlight brows  bought but not sure, needs painting as well 15. Blackout rear bumper, fog inserts, lower grill. Also paint the engine cover black/white. 16. Change the whole front headlight units (retrofit, blacked out, change the LED DRL for a more whiter look) 17. Mountune spoiler exhaust or RS spoiler, Maxton design do both of these. 18. Front & side splitters. Triple R looks pretty good. 19. Front bumper extensions or RS style front bumper. The front bumper extensions are done by fifteen52 originally, but both can be bought from Maxton design also. 20. Mountune/Revo/Peron tuning, remaps, exhaust etc. Mountune will keep my warranty, by Revo looks like a better deal, i've heard a stage 3 Revo and it was crazy. 21. Find matching keyring and smartkey cover. 22. Find matching dustcaps. 23. Add another rear fog light on the other side (not sure what side they come with but it annoys me that it isn't symmetrical. 24. Add rain deflectors for wing mirror's (not sure on these) 25. Add wind deflectors  purchase new ones? *Will be added a few updates to this post*
  2. Right so I want to change my Air Box to an Air filter on my Mk7.5 Fiesta Black Edition 140 - But I have noticed there is a air sensor attached to the unit if i fit an air filter will this cause me any issues if the sensor isn't plugged in? Cheers Ben_140 
  3. Please bear with me on this one. Until this week I haven't heard of a DPF. My last car was a 2010 1.4tdci Fiesta Edge, fitted with a DPF. My journeys mainly consist of trundling around town with the odd motorway run. And I had the Fiesta for 2 years and 8 months, and the only problem I ever had with that car was the rubber seals around the fuel injectors. There was not any other single fault. 2 months ago, I bought a 2009 1.6tdci Focus econetic. Reasons being i can't afford to run a petrol car with the cost of fuel and tax. And early this week, whilst doing around 60mph the engine lost a lot of power, and on the dash all that was displayed was "Engine Malfunction". I had no prior warning about this. So took it to my local mechanic, and he explained the issue, and cleaned it and now all is well. So I've done some reading about DPF's, and 9/10 people are saying to stay away unless you're on the motorway often, which makes sense considering how a DPF burns off the soot. But I'm a little confused/worried. My previous fiesta had 50,000 on the clock when I bought it, and I changed it at 60,000, and I never had a problem with the DPF. And this focus has 86,000 on the clock. So, what I would like to know, is, 1) Did I get lucky with the fiesta? 2) How long can a DPF go without cleaning just driving around town? 3) Will me taking it onto the motorway for 20 mins clear the filter? 4) If so, how often would I need to do a motorway run? Also, I have read that to begin burning off the soot in the DPF, the engine revs need to be around 2,500rpm. Which is a slight issue, as the other night on the motorway for about 3 miles, at 70mph in 5th, the engine revs only hit 2,000rpm. So, only hitting 2,000rpm even on a motorway, does that indicate that I have an "active regeneration", as opposed to a "passive regeneration'? I'm aware fundamentally, I've made an error in buying this car, I only buy diesel to keep the cost down, with tax and fuel. I'm just wondering, will everything be ok, if I take it for a high speed run say every 2 weeks? After discussing this with my father, he is under the impression that, I didn't have a problem with the fiesta, so it's likely that you will generally be problem free with the focus. After paying £200 for the DPF clean, I'd like to help the engine/filter as much as I can, I also have to consider, that I have no idea how the car was treated by the previous owner. Any help/advice is appreciated.
  4. Hi there just wondering if anyone can help me by showing the location of the "air box resonator" on my Fiesta 2011 1.25L Zetec ive had a small look to try and fine it but I thought it'd be best to ask some more knowledgable folk, if anyone could help tell me the location of the resonator it would be greatly appreciated, photos especially!  Many thanks, Luke
  5. Hi Everyone, I am planning on changing the Fuel Filter on the above car over the weekend and I have the good old Haynes Manual to follow, however I was just wondering if anyone knew of any good posts of this nature on the forum already or of any useful guides - a quick search didn't return anything? Any useful advice or things to watch out for etc also wouldn't go amiss! Also can anyone recommend a good Diesel Primer Pump - there are quite a few on Amazon, but most of them have less than brilliant reviews. Many thanks in advance! Glen
  6. So, new year and new upgrade plans. Just wanted to hear the thoughts of anyone who has these in their cars: 1. Focal Performance PS165 2 New: Focal Performance PS165FX Is the new material in the FX worth the price bump from the PS165. I have no way of hearing them myself in person and I can only rely on reviews off the internet. So far, no decent review on the FX but it did win some awards, so it can't be half bad. Also, I found this off Ebay and was wondering if it would fit my MK2.5 even though it is meant for the MK2: Plan would be to get the sub enclosure and also get this JL Audio 10" sub to pair it up with: Any suggestions regarding front speakers and 10" sub woofers would be greatly appreciated. Thanks :)
  7. Upgrading Centre Console?

    Looking to upgrade my centre console to the one they have in the Titanium (With the armrest and different style handbrake) Just curious is it actually possible and what parts will I need, this is something I would like as using a coffee cup as an armrest is not so convenient lol. So far I have found: Centre Console Handbrake Thank you. Looking to buy these parts today ideally.
  8. Ok so let me get this started by saying this job is an annoying one to do but I was getting a weird smell through my vents and thought to start with the cabin/pollen filter and thought whilst I was there to make a quick guide as I couldn’t find any with decent pictures Filter I bought - Dimesions: 34 x 209 x 230 Tools Required 7mm Socket 13mm Socket T20 Bit Flat Head (Might not need it) Step 1 Clear out any contents that you have in the glove box as it needs to come out as the filter is in behind it. Step 2 There are 3 plastics tabs that are covering 3 screws mines just popped away using my hand although a flat head screw driver would come in handy for any ones that won’t budge. Step 3 After that you will need to remove 7 screws using the T20 Bit. Your glove box should just pull away, keep an eye out for the little hook at the top as this is what the glove box uses to keep it shut and with the screws removed the metal bracket will not be held in place. Step 4 With the main part now out you will then need to just unhook this plastic part should come away easily. Step 5 The 2 hinges should then just pull away don’t be afraid to give these a little tug. After this you glovebox door can be removed. Step 6 Now that we have the glovebox completely out we should start with the cover that holds in the cabin filter. This bolt requires a 7mm socket and is at the bottom you should be able to get to it through the footwell. Step 7 We now want to unclip the fuse box using the little tabs so that we can access the bolts that holds on the metal bracket which the fuse box sits on as this metal bracket is in the way of the cabin filter cover so need to be removed before we can get the old filter out. Step 8 I got a little ahead of myself and forgot to take a picture of the 2 bolts although you should get the idea. These 2 bolts require the 13mm socket. Once removed you will need to wiggle the fuse box off the bracket and get the bracket out of the road. Step 9 With the metal bracket out the way all you need to do now is remove the 2 (7mm) bolts and the cover should then just come away. Step 10 Forgot to take a picture at this point but you should now be able to see your old filter all you need to do is remove it. It can be a little awkward with some of the cables nearby but can be done if you take your time. This is the picture of my old filter the camera makes it look better than it was but it was completely black and looked like it had never been changed even though I bought this car with a full dealer history. After this just put in your new filter and follow this guide in reverse. Took me around 30 minutes to do it and that was my first time doing it. Hopefully the pictures are clear enough if not I do have them in high quality. Once I get the zip file uploaded somewhere I will add the link in.
  9. Which Induction Kit?

    Hallo Together, i am thinking about changing the standard air filter with the performance one. I ended with two options: K&N 57S-4000 Performance Intake Kit or J1's Ford Focus Mk3 Air Intake Kit Well i already know about the great manufacturing quality of the J1 intake kits but is it worth the extra money comparing to K&N? Thank you in advance for any opinions or personal experience :)
  10. Devil eye headlights

    From the album Mk6 Fiesta Zetec S

    © megsfiestax

  11. I want to post this thread because I recently came to this site as a new member, hoping to have found the answer I was looking for to my own Ford problem, but without success. There were many similar threads and I take my hats off to those Ford owners who made the effort to post some help and advice for others. However, I hope that my specific thread will be of help to those drivers with the same model Ford as mine. I own a 2005/55 plate Ford Focus 1.6 VTC Petrol 2 Door, of which I am extremely proud. Two weeks ago I had her serviced, ...which brings me on to the subsequent issue I had. 3 days after the car was serviced, the Crankshaft Position Sensor failed and my mechanic was not available to do the job due to being on hols. I had been told that it wasn't a big job and to try and do it myself. I turned to this sight for help, but none of the threads applied to the year and model of my Focus. The good news is, the job has now been me, and I want to share with other Focus owners my experience in replacing the sensor. I did buy the Haynes manual to assist me with locating the sensor (I have limited mechanical knowledge), but moreover I want to share with others how I did the job and what issues I had to overcome. Firstly, to do this job you will need a new sensor (obviously), a small torch, a good strong trolley jack, an axel stand (safety first), a socket set and an 8mm socket. However, as I later explain some of the issues I experienced, I would also suggest having a swivel head socket, or a short shaft 8mm spanner. Next, to locate the sensor on this model, jack up the car using the jacking point just below the driver's door, as the sensor is positioned just left of centre at the base of the block, and after putting a suitable axel stand in position lower the car onto the axel stand for stability. I would also leave the trolley jack in place for added safety. From the front of the car, poisition yourself underneath and look for the oil filter. From the oil filter look up to the crank casing (approx 4-5inch upwards) and you will find a blue coloured electrical connector block sitting slightly inwards in the crack case. This is the sensor connection, and you will need to remove the connector block before you attempt to dismantle the sensor from the crankshaft. To disconnect this, on the connector block you will see a very fine spring this inwards towards the crank case to unlock the block and slip off the connector. With the connector removed you will now be able to clearly see the 8mm bolt head that connects the sensor to the crankshaft. This is where a swivel head socket or a short shaft 8mm spanner may be useful, because as the crankshaft case comes accross the back of the sensor, on this Focus model the crank case bevels outwards, thus limiting the room you have to put the socket with ratchet handle headlong onto the bolt. An extension on the socket head would have helped me, but because this sends the socket handle backwards, the turning of the socket is then limited by the Oil filter. The easisest way would have been with a short shaft 8mm spanner, as this would have slipped neatly onto the bolt, but I didn't have one of these, and the longer handle spanner I had was limited in turning by one of the water hoses running off the base of the engine. If you only have a fixed ratchet handle then you will have to be prepared for alot of short bolt turns because of the limited room to turn it. Once you have loosened the bolt enough, you can get your fingers in and turn it by hand until it is completely out. Now the sensor is free for removel....take hold of it and slide it backwards, out of the Crankshaft and compare it with the new one to double check you have the correct one for replacement. Now you can fit the new one. Carefully slide the sensor into the crankshaft, being careful not to knock or drop it, as this is a 'one time fit' part. As you slide the new sensor into place, be sure to align the bolt head connector up with the thread hole. Use a torch to try and see that it is in line before offering up the connecting bolt. Gently rubbing some fine grease or WD40 onto the connector bolt will help with lubrication. Offer up the connecting bolt and slowly turn it into place by hand as far as you can go. Now revert to finishing off the tightening with the ratchet/spanner, depending on what best suits you. Tighten it up until the socket or spanner won't move without forcing it, but be careful not to over-tighten. Finally, slide the connector block back onto the head of the new sensore and you are done. Jack the car back up off the axel stand, remove the axel stand, and then lower the car back down off the jack. I am hoping to post some photos to this thread as soon as I can find my camera cable to connect to my laptop, but I can honestly say that for a novice mechanic, this job is more fiddly than difficult. I hope this helps someone else, and good luck with any general running repairs that you may have.
  12. Hey guys, Which is the best air filter for my car? Here's what I found on ECP but im unsure which one would be best, I dont want to buy poor quality products. All help is much appreciated. Thanks :)
  13. Hi, This is my first post! I have recently obtained a Ford Fiesta 2003 as a present from my parents as my first car. I am wanting to change the stock radio which came with the car (the triple section 4500 RDS). I have been looking at possible radios to replace the old one with but I wondered if there would be any cable swapping required or whether I would just be able to use an adapter. Here are the radios I am looking at: I would really appreciate any advice you have on fitting these radios! I realise I need to cut away the three sections on the dash and a fascia. Thanks allot, Charlie Wood ************************************************UPDATE***************************************************** I have found out the information required and ordered a radio.
  14. Polyurethane Bushes

    Does anyone know if there is a front and rear polyurethane kit for my 2010 Mondeo titanium x sport 2.0 ecoboost
  15. ive done some research on the internet prior to choosing the correct brand of replacment induction filter, most would assume that the best choice to be K&N but i have found Green Cotton Air filter to have the edge over K&N or PiperCross due to Green's manufacturing process being more hands on instead of automated manufacturing. the green filter in bonded with precision to the frame of the filter the results are more air flow in to the filter where K&N use an automated process resulting in over use of bonding glue to the frame of the filter which can spread across the panel restricting flow and performance of the filter leaving is performing less than K&N's original prototype that they use to get their gains figures from. but anyways enough of me blabbing on about the differences, because the information is available on other websites for all to view without me re-typing it lol. to purchase a Green Cotton performance induction filter for your ford and feel the difference for yourself log on to http://www.priracing....php/144/1/ford and get 10% Discount off your Green Cotton Performance filter by using the code FORDOWNERSCLUB10 you can also get 20% Discount off any Ritchbrook branded stock by entering Discount Code: RICHBROOK20 both offers are eclusive to members of special thanks to Ross at Priracing for this kind offer. So here's whats in the box for the focus 1.6TDCi induction filter. Ive decided to upgrade the standard ford induction filter in my 1.6TDCi focus to a free flowing high performance induction filter. and since i was changing it ive decided to create this guide to show others what is envolved aswell as report on the performance difference between the stock and aftermarket direct replacment air box filter. fitting time takes around 15-20 minutes, Tools required are an 8mm socket and a pair of rubber latex gloves So Open the bonnet, remove the battery cover if fitted. and using the 8MM socket loosen the 4 bolts that are holding the lid of the induction box in place. please note the bolts do not pull free/seperate from the lid, they remove from the bottom section but stay inside the lid section by design, Once lid has been removed you will see your heavy stock ford filter, hopfully ford wont have bent your stock filter when putting it in their as they have done with mine. place your hand on the top end of the filter and pull upwards to remove it. once removed, ensure the lid from the induction box aswell as the 8mm socket are stored off of the engine bay and close the bonnet if you are planning to wait a couple of minutes prior to fitting the new filter. this will help prevent any contamination getting in to the induction pipes.
  16. Chewed Screw Head

    The screw that holds the cover of my cabin filter housing has had the head chewed up pretty bad and I can't unscrew it to change the cabin filter. Any suggestions on how I can get it off/out?
  17. Just wondering where abouts is the oil filter on my 2008 1.8 TDCI and what's the best way to get at it? Also if I am changing the fuel filter, is there anything I need to do (i.e bleeding the line) or can I just swap filters out?
  18. Hi im new here but just joined because i need advice please. I've recently had the DPF static regenerated but at the same time the reading for the fuel delivery pressure was low so I bought a fuel filter £42 and fitted it myself ... All straight forward. .. i started the car fine and it it ran for 20 seconds i assume on what diesel there was in the rail but then stopped! It won't start again.i took the pipes off the filter and cranked the engine and there's no diesel coming out? Im at a total loss. Any suggestions would be much appreciated thank you.
  19. Sony 6000Cd Upgrade

    I'm new to the site and need some info! I've just got a 2010 focus estate fitted with a Sony 6000cd stereo. been trawling the net trying to find a possible replacement stereo with a usb port and came across the ford music box usb cable. Has anyone had one fitted and what's the audio quality like?? also does anyone know of a stereo with a usb port the same shape as the 6000cd that would be a direct replacement and still have all the steering wheel controls/voice activation?? has the DAB version got a usb and could it be a replacement?? I don't really want to go to the hassle of replacing the whole facia ect... Any info would be a great help!!!
  20. Hello all, I have a Travelpilot NX Sat Nav/Audio unit installed in my 2008 S-Max which is no longer reading the maps correctly from the DVD. I have the 5.3 version of the software installed and the 2012 TomTom map DVD. I've ejected the disc and checked that it is clean and have tried resetting the unit but it has not improved matters. So my questions to the forum are: 1) Where is the best place to get the unit repaired/serviced? (In the Midlands preferably) 2) How much should I expect it to cost? 3) Can my 2008 unit be upgraded to include DAB radio or Bluetooth audio? 4) How do I get it out of the dashboard??? Many thanks in advance!
  21. I have a 2013 Ford Focus Trend 2.0L LW MK2 TDCI diesel hatchback car. I want to replace engine oil filter by myself. Who know where the engine oil filter is located? Thanks in advance.
  22. K&n Panel Filter Any Good

    I've just been offerd a brand new k&n panel filter from a friend and just wanted to know if they are any good and won't ruin my maf sensor. It's free and won't cost me a penny. Thanks in advance all coments and expiriences will be apprieciated.
  23. Air Filter Fitting Guides

    Hello all, This is my first post. I've spent a lot of time researching this forum site trying to decide wether or not I should buy a K&N Panel or cone filter or a complete induction kit. I still can't decide... I own a MK5 fiesta zetec(-s?), 1999. First car and i've owned it for a little over 4 months now. I'm wondering if anyone has a guide to fitting an air induction kit please? Should I choose to purchase one, I'd like to know how to fit it in. I think I'm asking because there was discussions about finding your own cold air feed with an induction? Or cone I'm not sure... I understand the air filters don't add much power and to be honest, I'm not after much. It's also for the experience of getting my hands dirty in the engine bay and knowing how things work! Thanks for your help guys. P.s. I know there are numerous posts and topics about air filters but none of them give me the answer I'm looking for!
  24. So I bought a new head unit from Halfords today and removed my 6000CD, Unfortunately the harness they recommended for my Model was totally wrong, Also gave me the wrong removal keys! I Managed to get the head unit out with a little help from a friend. Sitting with no head unit for a couple of days while I wait for my new harness. Notice I needed a new face plate too so found this steal on e-bay Includes the correct Keys (not that I need them), Harness and Face Plate Head Unit : What Halfords sold me : Will post pics when I get it all installed.
  25. Hi Changed oil and filter a few weeks ago, had problem removing old filter. Do not want same problem next year. Does anyone know what type/model number of cup removal tool I require for my car and where to purchase it from amazon or e-bay, not a lot of clearance to fit a tool, my chain type worked but was difficult. All help appreciated, Barry T