AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Search the Community

Showing results for tags 'forums/fault+code+P0741'.

Found 127 results

  1. My 2013 ford fiesta 1L ecoboost's start stop isnt working, the button to turn it on and off just stays illuminated when pressed, you can turn the light off when the ignition is on but as soon as you start the car the light comes on and you cannot turn the light off, and therefor the start stop isnt working.  any advice  thanks  
  2. engine system fault

    Hi all   i hope someone can help. i have a Ford C-Max, 2007 reg, 1.6 petrol engine. today the car has come up with a fault "engine system fault", then says "speed limited mode", and a red light is on. can anyone shed any light onto this please? from what I've read elsewhere this problem is quite serious and never seems to go away! need advice and help please.   thanks. 
  3. Paint code issues

    Hello all, A 2007 Fiesta is in need of TLC after having an argument with some wildlife on the dual carriageway  I'm checking the paint codes, and I'm not liking what I'm seeing: If I understand the paint code system correctly, this VIN shows the paint code to be V5.. which would be Jewel Green introduced in 2005. As the more observant of you may have noticed, the paint around the VIN plate doesn't look particularly green...  Leaving that particular issue to one side, any idea what the correct paint code is for this? I've definitely seen other Fiestas this colour so I'm fairly sure it is a standard colour. Cheers, hk
  4. Hi all I've got a 56 plate Fiesta Zetec and there seems to be a problem with the Dash Computer, the one in between the Rev Count and Speedometer that displays the mileage and outside temp along with average fuel consumption etc.. Basically I was driving home this evening and noticed the display has almost faded completely! Its still lit up green (when the light are on) but the actual numbers and display you can barely see at all. Anyone have any idea what the problem could be? Thanks in advance!
  5. Key Code

    I recently put a new battery in my 2006 focus. unfortunately I've lost the key code for the radio/CD player! can anybody help please? the radio model is a 6000CD. Many thanks.
  6. Key Fob Loosing Coding

    Morning all, I have just had to re code one of our keyfobs after what i thought was the battery going flat, However, this morning it has stopped working again, re code it and its fine, anyone heard of this before? or is the keyfob on its way out?
  7. Re Radio

    hi there I am having trouble getting the code for my car .. unfortunatlly I needed a new clutch for my car and wen I got the car bk I found my radio not working it is asking for a code can someone help me I have the serial number for my radio
  8. Hi all, My 2006 Ford Focus 1.6 TDCi came up with an engine systems failure message today just coming off of a dual carriageway (70mph) accompanied by a red light next to the trip computer. I think it went into limp mode (severly reduced power, unwiling to rev much), so not good when you live at the top of a hill! Two other times when starting the car it has briefly displayed an error message (once it said "steering assist failure", and yesterday it came up with the same engine systems failure message"). Both times I have restarted the car and it disappeared. The car is a 2006 on an 06 plate, and has currently done 73500 miles. I bought it last may at 65000 miles, and it had a service just before I bought it. As it had just turned 6 years old/65000 miles, I'm presuming the DPF would have been changed then? Does anyone have any idea what's wrong? Thanks in advance, Minnis
  9. Maf

    Hi, I had a lot of problems with my ford focus 2002. Front discs and brake pads replaced, caliper lower bolt stripped, head lights wiring burnt and connectors needing replacement. Now all done but i now have an errror code p0340 cylinder 4 misfire. I have a new mass air flow on order as i believe the old one is faulty as test confirms. Is the P0340 code a result of the mass air flow fault. She runs but very badly. She starts first turn of key but idle is very rough no power heavy fuel consumption. Any ideas as i am worried this could be a bigger problem than the mass air flow sensor.
  10. Sup Guys Could really do with some help. I've got a ford fiesta flight 2001 1.3L endura E engine 89,000 hours. Whenever I start the ignition its start fine every time, but immediately after the ignition the revs drop over a period of 30 seconds until the engine eventually stalls. Regardless of whether I try to raise the revs with the medal, it doesnt help. recently it broke down due "miss firing" after which new ignition/HT leads were fitted. Now this issue has cropped up and I've tried having the battery and spark plugs replaced with no change. Any help and advice would be greatly appreciated
  11. Hi, I got an engine system fault error pop up on the instrument cluster with the red light about 2 weeks ago and it went into limp mode. I took it to kwik fit and their bosch reader couldn't find any error codes. The error went away on its own and I was back out of limp mode. But the error is back! I now have an OBD cable and tried out forscan, it has picked up multiple DTC errors but I am unsure which one is causing the engine system fault (if any) and which faults are most severe, could someone have a look at the attached PDF and give me some advice? One thing that does look like it needs replacing is the battery? For extra info: Mileage: 100,000 miles EGR blanked Fuel and air filter at ~85k Oil change ~97k Euro 4 - DPF (according to ETIS) EDIT: removed attached codes as these are from the demo mode of forscan
  12. Recently whilst going to work in the morning the car sudddenly stuttered and "Engine Malfunction" light came on. I stopped and swithced car off and started car again, no problems whatsoever, however just to be on the safe side rang AA to come and have a look. The chap did an OBD reading and fault code P2290 came on however the car was driving fine. It's been all ok for the past week however last night on my way home, the car had the same problem, however this time, I was overtaking a lorry and it felt as if the car lacked power at 70mph after stopping and starting the engine. This morning everything was fine again. I contacted a garage who told me that it could be the fuel sensor regulator switch made by bosch or it could be EGR, TURBO, FUEL PUMP and to drop the car off to have a look. It seems that when I go above 3000 rpm on the motorway this problem seems to pop up. I nearly got killed last night!!!!! Anyone had anything similar problems? 1.6TDCI 110HP 59 Plate (service at ford garage according to service schedules, all maintenance done etc) Thanks
  13. Hello! Got a fault on my 2005 focus 1.8 tdci, hoping someone on here can shed some light on the situation. I get engine systems fault on the dash along with lack of power and a chattering noise under load. I have checked all of the boost hoses for splits, I've checked the intercooler, I've cleaned the air flow sensors both on airbox and boost pipe. Its had recent diesel filter. The turbo appears to be working as it should be. When I plugged the car in the only two faults were turbocharger underboost and vehicle speed sensor. I'm out of ideas :( Any help would be much appreciated!
  14. S Max Fault Code Help?

    Hi all just looking for some info on my s max purchased 9 weeks ago love the car just having few teething problems and starting to aggravate me had a fault code come up c07480 or 7480 not sure as took a pic and its not completely clear, but been getting engine malfunction appear with esp light staying on soon as engines off it goes, any advice would be appreciated Thanks Grant
  15. Hi all, I keep getting this warning light pop up on my dash. Has happened 4 times in the past 2 weeks, usually first thing in the morning. As soon as it appears it either resets straight away, or resets once the engine is restarted (rebooted) but the gears lurch around every time which makes me nervous about the pending icey roads we'll soon have. It's a Ford Kuga Titanium X 2011 - so I don't think it should suffer such a fault being relatively new as it's only done 60k miles. I spoke to the Ford garage the other day and they did the well worn 'ooooh...never heard of that problem before.....' line, but looking on here people seem to have experienced this with other models of Ford. Does any one have any experiences or help they can share with me please? Cheers all!
  16. Rough Running At Low Rpm

    Hi, I have a persistent (i.e. our local garage has failed twice to fix it) problem with a 2008 Fiesta 1.4 petrol. The engine seems to have a real rough spot just above idling revs. At idle it is fine, and it always starts no problem. At 1600RPM+ it is fine; it never misses a beat. However, if in slowing traffic on a level road, I back off the throttle, it often becomes rough around 1200-1500 RPM, even if there is very little or no load on the engine. It does this hot, cold or in between, but is probably worse when the engine is part-warm. I believe modern engines such as this one cut the petrol completely when you take your foot off the accelerator, and then some mechanism kicks in when the revs drop to idling, to prevent the engine simply stalling. I could be way off the mark here, but does the oxygen sensor have anything to do with this? The garage has fitted new plugs, leads and a coil pack, all at great expense, none of which have had any effect at all on this problem. Any advice would be very much appreciated. Kind wishes ~ Patrick
  17. Hi guys I have a focus 1.8 TDCI 2006 (71000m), we have owned it nearly 18 months and to be fair we have had issues from the start. We have replaced glow plugs and had it serviced as it should. Recently I had to replace the silicone elbow that runs directly off the turbo as it split (awful design!). After all this it still drives rough until one morning where at a roundabout all the lights came on the dash and it just lost all power, lights went off and it had nothing in it, no power or ignition lights at all. We replaced the alternator as it had burnt inside and put a new battery in it as well. We thought this had solved our dodgy ride but about three months later its back again, struggles in low gears, stalls when pulling off and keeps throwing the drive train fault code up! Any ideas? Im thinking EGR? Elec fault? could be anything but any cheap solutions to rule out certain things I would be grateful. Thanks
  18. Hello, I need to try and find the location (or even better if anyone actually knows it) the engine code of a 2011 Fiesta Titanium Diesel 1.4 TDCi. I've had the plastic cover off the top of the engine and have a look around the block but can't see it anywhere. Any help greatly appreciated. Thanks in advance!
  19. Hi I have had these fault codes come up together. P0620 and p0380. Has anybody else had these together? I have checked injector wiring and alternator wiring. The alternator is charging fine. The fault code goes away until you accelerate hard. Just wondered if anybody else has had the problem really?
  20. Problem With Alarm

    My C-Max (UK 2004 Mk.I Zetec 1.6 TDCi) alarm has recently started going off at random. Currently seems to once every few days or so. Have seen some suggestions about bonnet catch being an issue. Anyone know of a way to check the catch is at fault before I replace it? Anyone know anything else I can/should check? Anyone know how to disable the alarm until I can get it fixed? Thanks!
  21. Hi Everyone, I have just bought a Ford Fiesta 1.2 2002 (yesterday) it was running fine yesterday although the engine light was lit on the dashboard. We have checked oil, coolant etc and all are near max. We then looked in the glove box to check the fuses shown as the ones for the engine light and they were both fine. But we have now gone to start the car and the immobiliser has kicked in so the car is no longer starting at all! We have tried both keys and neither are working. The codes being read are 77 and 16 (may be wrong if read incorrectly) Please could someone with any idea as to how we can fix this please let me know. Also does anyone know if RAC can fix this problem as because it isn't starting we can't even get it to a garage to get it fixed. Thanks guys
  22. Is It Worth Fixing???

    Hi, I have a 2006 C-Max 1.8 TDCI Zetec. I parked it on the driveway about 5 weeks ago and during running it up a few weeks ago it came up with various messages, two I remember as being about steering assist failure and limited acceleration and then it cut out, tried starting it but it would not even turn over and the red light in the centre of the dash flashes randomly when the ignition is on. Put a hand held diagnostic on it this morning and it came up with 4 codes which are 1) U0121 anti lock brakes, 2) U0140 body control module, 3) U0155, instrument panel cluster and 4) U0131 power steering module. Has anyone else had anything similar and if so did it cost a lot to sort out? any advice would be appreciated, many thanks, Si
  23. Hi all, I have a 2011 Titanium X Mondeo which I have just purchased. However, an annoying fault has just surfaced with regards to the Speed Limiter and Cruise Control functions. Last Saturday, the Speed Limiter function stopped working all of a sudden. I had been in my car for about 2-3 minutes, set it to 30mph, and was approaching some lights when it disengaged automatically. I pressed the button on the wheel to switch it back on but nothing happened. I tried long press, short press, hard press etc, but nothing. The cruise control button also did not respond I noticed. It stayed like this for well over an hour, and I only realised it had come back to life when I tried it later on in the journey. I mentioned this on Wednesday to my local Ford garage but was told that it was very hard to diagnose if they can’t see the fault. As I drove off, I set the limiter and the fault just happen to appear again and the same thing happened… I approached some lights after about 2-3 minutes and it dropped out and would not come back to life. I turned round and went straight back to the garage while the fault was still present. One of technicians ran some diagnostics on the car and found (I think he said) a communication fault to do with the instrument control panel, but he wasn’t able to identify if it was software related or even just a loose connection. I believe he then cleared the fault on his computer so that it showed clear on his laptop and all working, but the actual fault of the Speed Limiter and Cruise Control buttons not working, was still present. I have attached a screenshot of what his computer said. The actual fault remained present until I got home. So maybe what his computer showed was not the Speed Limiter fault maybe? Half an hour after I got home, I had to go out again and low and behold, everything was working ok again. The buttons weren’t working when I parked up, but had come back to life once I had got back in the car. So there is a definite intermittent fault somewhere, but from what I understand, it will quite difficult to diagnose and was certainly not a fault the local garage had seen before. Has anyone heard of this before? It has happened a third time now. The only common thing I can link all three times with is that I turned the speed limiter function on within about 2-4 minutes of starting the engine. Do Mondeos need a few minutes to warm up and boot up maybe!?!? I also have the PowerShift gearbox. I have used the function plenty of times in a journey, but on those occasions, I have turned into on later in the journey. It could be purely coincidental, but that is the only common thing I can think of. If anyone knows the answer, then it would be great to hear from you, as my Ford garage are scratching their heads. Thanks, Matt
  24. Hi, I'm looking to buy a chip/scratch repair kit. Looking at my vin no. Etc, the paint code as I read it is 'zc' (car is red). I've searched (a lot) and it's not on database for my year and a different colour all together on other models. Could it be wrong on vin? Someone please point me in the right direction.... Thx Graham il add photo if in doubt.....
  25. Hi all, I am new here and I have recently bought a second hand 2011 Fiesta. I would like to know if the 2011 fiesta have radio code? I asked from the dealer I bought with and he said the new fiesta does not have radio code. Can someone confirm it? Thanks.