AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.

Search the Community

Showing results for tags 'forums/gel+badge+overlays'.

Found 32 results

  1. I recently brought an 09 "Zetec S" second hand from Evans Halshaw Ford and it has the rear parking sensors, and sports spoiler but I passed a 58 plate "Zetec" and the steering wheel inside looked exactly the same as MY "sports" steering wheel and so did the seats they looked the exact same as my "sports" seats, then I looked further at the Zetec I passed, noticing it didn't have the sport spoiler or the same alloys, and it wasn't marked as the S model.   Why does my car lack the proper badges and do i actually have a sports wheel and sports seats? Do I even have the so called sports suspension does it even carry the 120bhp it has on paper? 
  2. Zetec s badge

    Hi guys and girls iv just received the S badge to put on my focus zetec s but i dont know where to put it. If i put it next to zetec its a very tight squeeze and if i put it underneath it doesn't look right personally. So any advice or help would be much appreciated pics welcome to    Thanks DAN 
  3. Gel Overlays

    Anyone know if are still going? Not getting a reply from them. Is there anyone that can recommend anywhere else?
  4. Fiesta Zs Mk7 's' Badge

    Greetings, fellow Ford fanatics. I'm just after an honest opinion on the placement of the S badges on my Zetec S Mk7. I ordered the two badges off Amazon UK (came as a pair for a tenner plus 4 quid delivery.) The rear one is adhesive and therefor is a piece of cake to install on the rear of the car. My ZS never had the "Zetec S" badging on the boot (any idea why?) so the S badge simply went where that would have been. Now I originally wanted the front grill badge to go in line with, and just to the right (when facing the car) of the Ford badge (quite a popular placement.) However, the badge needs to be bolted through the grill, and since it's water tight (and I have zero drilling experience) I wasn't prepared to attempt that. So the front badge ended up on the bottom right of the grill. Pretty easy to install there tbh. The plate behind the badge just tightens around the back of the grill. So what do you guys reckon? Keep them where they are or go the extra mile and see about drilling the front grill next to the Ford badge? Cheers.
  5. IMG 0481 (1)

  6. IMG 0478 (1)

  7. IMG 0477 (1)

  8. New S badge: Front

  9. New S badge: Rear

  10. Hi, New to the fiesta hype. started with a few little mods, deflectors,spoiler,miltek exhaust etc etc. purchased a 's' badge for the front radiator badge grille. i can see its held on by 3 clips at the top which are easy to remove. but the bottom 2 I'm struggling with. can anyone help. they are attached to the bumper. Thanks sam.
  11. ST - Yellow ST badge decal 2

    From the album My ST MP215

    Freshly added yellow ST badge decal, rear.
  12. ST - Yellow ST badge decal 1

    From the album My ST MP215

    Freshly added yellow ST badge decal, front.
  13. I work for a composites company so I made some carbon fibre ford badges. The one I'm showing here was a prototype and not of good quality because tooling carbon material was used which is not for final parts. I was sanding it before polishing but I went through the weave, oops :/ . It has also not been lacquered either. Gained at least 10 k/w with these mad weight savings.
  14. Gel Overlay Issues

    A while ago I made custom badges for the front & rear of my MK7 from Heko ( They are great quality but the rear badge has fallen off & I'm struggling to find ANY ordering avenues for replacements. The Heko creator seems to be down & everywhere else is selling pairs that are the same size & obviously I need a smaller badge for the rear. Other sites I've found either only have badges for the facelift (mines pre-facelift) or only for the front. I e-mailed Ryan ( & am still waiting a reply & wanted to know of any other channels to order through in the meantime.
  15. Inspiration/new Owner

    Hi Everyone, As you have noticed I'm a new Ford owner, I have a White Ford Fiesta Zetec 2010 - 'mk7' (I think). I'm just writing for any advice or guides of you that I can do to my car, I'm not very good with cars or have any great inspiration on what I could do but I just want to do little things to it to make it my own and change it a little. I have heard of Gel overlays and cant seem to find any anywhere for my front and rear Ford badge :( Another thing... (I have attached both of the images to this post) can I Change my original from bumper to the one I have attached or are there different sizes for this? And again... if any one has any ideas/websites I can use or little changes I can make to my car I would much appreciate it. thankss ^_^
  16. new front grill gel overlay

    From the album mk6 Fiesta zetec

  17. sorry if this is repeating things. Ford motor company have told DMB graphics that they are no longer aloud to sell gel overlays with the ford logo on them. this will come into effect on the end of June this year. There is a big statement about it on their website
  18. Hello, Just got a Ford fiesta ST mk6 08 Plate, however I'm looking to get silver and black ford badge? or black and red overlays. Does anyone know where I can grab this from? struggling big time as dmb don't do them anymore. Also looked on Heko uk but they had badge dimension? which I'm not sure about? anyone ordered from here that knows which ones to order?. Cheers Guys
  19. Hey all, Was cleaning out my Dad's S-max with him and the little Sony badge that sits on the DAB radio has flung off somewhere! I know it's a long shot but anyone have any idea of where I could try and get a replacement? It's only about 3mm x 22mm or so in measurement and proving difficult to source! Like I said I know it's as long shot but any help would be appreciated!
  20. Just wondering if any one has used the DMB gel badge overlays on the new Mk 7 facelift fiesta, if so any good? :D
  21. It's small but it makes a big change Some Blue on black gel overlays Before After Before After Sent from my iPhone using Ford OC
  22. 2014 Zetec S Ecoboost

    Hi guys, I own a ford fiesta zetec s ecoboost 2014 only purchased a week ago. I have a work college telling me it's not a zetec s because it doesn't have the badges on. Will someone please back me up in saying that the new ZS doesn't have the badge on the back anymore, it is instead replaced with the ecoboost badge, but it still is the ZS model, cheers.
  23. Hi There!

    Hi all, I am currently driving in a 1.3 Fiesta Finesse which I have had for just over a year and I'm just looking for some advice on things to do to my fiesta to make look a bit cooler and general up keeping of my wee ford. Thanks for reading!
  24. Custom St170 Badge

    Hi all I have put together this st170 badge on my car this morning let me know what u think!
  25. Rear Badge Light

    Hi all. I have just purchased a red one of these from fleebay for 20 quid and intend fitting it to the rear of my car. I want to connect it to the number plate connection so as it comes on when they are on. (I tend to have my lights on in daytime anyway as I have led side lights and like the look) 😃. I have read a post which had the original badge over a backlit surround but I prefer the look of this if I'm honest. Anyone got any ideas how easy/ hard it may be to connect to the number plate bulbs or any issues I could have with removing the original badge? As soon as I get it and start fitting I will update. Cheers as always for any help. Lee