AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.

Search the Community

Showing results for tags 'forums/heel+and+toe'.

Found 2 results

  1. Hi There!

    Hi all, I am currently driving in a 1.3 Fiesta Finesse which I have had for just over a year and I'm just looking for some advice on things to do to my fiesta to make look a bit cooler and general up keeping of my wee ford. Thanks for reading!
  2. You don't have to be driving a Fiesta RS WRC on the RAC Rally to use a technique called 'heel and toe' to make smoother downshifts and increase safety by having better control of the car. A small 'blip' of the throttle between the gears helps to synchronise engine speed to the revs needed for the lower gear to engage more smoothly, and your passengers won't even realise you've gone down a cog as you approach the corner. With the toe of the right foot firmly on the brake, the clutch disengaged (important!) a touch on the accelerator with the heel of the foot brings the revs up and the lower gear slides in nicely. The problem on the Mondeo Mk 4 is that the accelerator pedal is too far away from the brake to be able to 'heel and toe' effectively. Ford can supply a nice set of 'race pedals', a snip at a mere £155 + VAT, but search the internet and one can buy a kit with all three pedals for £9.80 including P&P. You don't need the brake and clutch pedals, they can go in the recycle bin but the accelerator pedal which fits over the original does the job nicely, reducing the gap to the brake pedal, increasing the overall size and raising it towards the height of the brake pedal by 8mm so that one can now 'heel and toe' very effectively. The accessory pedal comes with two brackets which give a firm fit over the original accelerator pedal, but for added security I put in a 5mm No 4 self tapper which holds everything in place. Be sure to position the accessory pedal carefully so that at full travel it does not hit the carpet (ie make sure the accelerator can still hit the stop) and the gap between the brake and new, larger accelerator pedal is at least 40mm.