AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Search the Community

Showing results for tags 'forums/rear+window'.

Found 136 results

  1. Mk2.5 to mk2 rear lights

    I am wanting smoked rear lights to my mk2.5 focus, and all the better looking units ive found are apparently for the mk2. Do these fit? They look VERY similar! Thanks
  2. Tint windows ?

    Hi   I want to ask what is the easiest way to tint windows on my mk6 fiesta ???
  3. Hello everyone, I was wondering if anyone would be able to give me some advice on this product sold by puma speed? http://www.pumaspeed.co.uk/product-Fiesta-ST-150-Stoffler-Rear-Valance-twin-hole_527.jsp Do I need to cut my original rear valance?(The standard one that comes on a 57 plate fiesta zetec s) Was wondering what actually come with this product also, is it a whole new rear valance or is it the fins and the top half that stick on over the existing one?   Any help would be largely apreciated.   Samuel.G.Harris Burgerm4n
  4. Window Tint Advice

    Thinking about getting the windows on my MK6 tinted but dont know how dark to go on them? anyone got any pictures or good on photoshop? thanks in advance :)
  5. Hi, Looking to remove my rear bumper and struggling a little. Found loads of info for the Mk2 but none for the facelift! Has anyone removed it from the facelift model and if so please help! :)
  6. Hi Guys I have just had to use my rear fogs since i purchased my car last year on returning from a journey i noticed the lefthand/nearside one was not lit reading on talkford forum it appears there was a change from Mk3 twin rear fogs to Mk3.5 single rear fog, if that is the case, is there any parts i can purchase to bring it back to twin rear fogs, it looks stupid with a red lens cover on thaf side if not working or in use, please advise if anybody has done this conversion and any part numbers used ??, best of the 2016 season to all fellow members huey45
  7. It is interesting how many Fusions have bad water ingress in the rear lights. Mine is a 2009 with water in both, despite sealing the bulbholder and everything else. Looking at Ebay and scrap yards I've found most of them to be the same when you ask or examine on a wet day. Even a 2011 car with water in both lights. Is it a manufacturing problem as a local dealer said he had replaced stacks of them. Nice, as they are £100 each inc fitting or £75 if you do it yourself, and only a 12 months warranty. I have had cars all my life and never any water ingress, only plastic fading on son's 2001 car. The Fusion lights must be badly designed or very cheaply made!
  8. Hi Just wondered if anyone on here has had the same problem. I have a 1999 focus estate, only problem being is the heated rear window is only half working/clearing. Now I only use the car really for fishing and taking the dog out, but as you can imagine, only being able to see half out the rear window can be a bit of a pain. Has anyone had the same problem?....and if so, how did you fix it? Many thanks. Rich
  9. Hi All, Question about my Focus. Came back from holiday after a week away and cold weather at home. Took off handbrake which stuck until I reversed out of the car parking space, but it still feels there is a little more rolling resistance than normal when I drive the car. Main points: -Handbrake disengages completely....not slack when it's down. No hand brake light on either, so that's all fine. -Fuel consumption has gone up by 25% (although I am not doing a weekly 80 miles round trip on a dual carriageway during the winter, only combined city/country driving) -Slight noise coming from rear right wheel but not from others when car is rolling slowly, doesn't sound like the brake though So, I'm thinking the bearing, but how could that have just decided to break while I was away? Car is parked in secure location outside. Any ideas? This weekend I will jack the rear up and compare the rolling resistance of each rear wheel to see what's up and report back. Cheers!
  10. Hello all Recently purchased a '01 Ford Focus Estate 1.8 diesel. One of the very few problems with it is the window Regulator was removed by the previous owner and a piece of wood put in to support the window glass. I have removed the wood and refit a new regulator and motor, easy enough. Unfortunately I didn't notice that rather than just detaching the previous regulator, the previous owner just cut the cables so I am unable to connect the controls to the motor. The motor is an 8-pin female socket. I need the 8-pin male plug end but I don't know any model numbers or even the correct name of it. I tried various searches online, through eBay and elsewhere but they rang hollow. Is anyone able to assist? I will upload some pictures shortly if that helps. Thanks in advance
  11. Hi My 2 rear windows have started rattling in the last few months. It started off on one side and now its on the other as well. If you put the window down slightly, you hear it every time you go over a slight bump. If the windows are shut, you don't hear it, but you do when you close the doors. Its with the Ford dealership at the moment and they reckon its normal because they checked another Galaxy as well. I know for fact it only started a few months ago. Any ideas what it could be? Imran
  12. Window Tint Advice

    I'm looking to get my windows tinted on my zetec s, but I'm stuck between what shade, either limo black or medium, the company doing the tints recommend medium however I've seen other zetec s' around with what looks like darker than I imagined medium would be. If anyone has their windows tinted would you be able to post a photo with what shade it is to help me decide.
  13. Hi All I have a shiny new Gord Galaxy Titanium Edition 2014. I have noticed that the front and rear headlamps always stay on when the ignition is on. It is supposed to have auto sensing headlights when is where the knob is set to. Even if I move the knob to manual "0" position, the lights still stay on. ( The dash lights go off in the position). I took it back to the dealer and was told those are the running lights but that sounds like nonsense to me. Anybody know if he's right, will I always have to drive around with my lights on? (and let me clear, they are not the small types of running lights, it is the main headlamps were talking about). There are loads of Galaxys on the road but I have not seen any with headlamps on during the day on any of them. Hope someone can shed some light (sorry, couldn't resist) Imran
  14. The other half has an old focus (02 plate) and the O/S/F electric window has gained a mind of its own. It will go down and usually refuse to go back up. When it does it might stop and then the next 'up' press will mysteriously send it back down again. On other occasions it will work fine. As far as I know there is only a switch and a motor in the door and the motor is working obviously so that would mean a switch right? But it seems to do it when it's damp which might suggest that its water getting into the motor connection. Has anybody else had this problem?
  15. I am wanting to replace my rear diffuser with either one off a Zetec S or ST, but on my car the middle two parking sensors are actually in the diffuser, rather than above it on the rear bumper itself where they seems to be on most fiesta's I have seen. I have been looking for rear diffusers for sale that already have the two parking sensors incorporated but cannot find any. I have now decided it is probably quicker to move the sensors onto the car bumper itself and then buy any diffuser. I'm assuming that all I need to move is the sensor which is just connected to a single wire? Has anybody attempted this before? Was it an easy home job or is it better for a garage to do? Cheers.
  16. Window Seal Problem

    Hi all, was looking for some advice for my Mk7, after fitting my speakers and then re-fitting the door cards, the inner seal with the felt on the back of It that rests against the window doesn't seem to want to go back to Its normal place and sits high on one end when you put the window up, is there a certain way to fix this back together or something, Ive put some pictures to try and show what I mean
  17. rear valance

    From the album Fies

  18. Escort Van

    Does anybody on here know of anyone with a rear drivers side hub to suit a 1989 escort van ?
  19. Well after fitting the Spider tuning chip to my 1.6 tdci 115 (now 150) I was really noticing the body roll and the wife was complaining and the dog Barfd!. So it was either drive slower round corners (where's the fun in that?) or sort it., The 40 profile 18's were not helping either Just fitted the BMR78XZ whiteline Rear adjustable Sway bar (anti roll bar for us brits), and am very chuffed http://www.ebay.co.uk/itm/141436716578?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT The car stays flat around corners and roundabouts now, but still has suspension, I purposely drove over speed humps and did both wheel and one wheel up jobs and the suspension of course hasn't changed, but stick her in a roundabout or a fast sweeping bend and she stays really flat and feels less stressed (its raining at moment so cant go too mad), Rear feels much more planted now Fitting wasnt too bad as the car is newish still so all bolts were clean. However the bush mounts did need a tap on the socket handle to free them up (all 13mm). The front arms were easier and need an 18mm spanner for the nut and a 10mm spanner to hold the centre from spinning Only issue was that the holes in the new bar were 2mm too small for the front bolts to fit through. This was remedied with a circular file and 15 mins of elbow grease, rather than a drill. Then the holes were greased up to stop corrosion. The new bar doesn't have stops for the rear bushes like the original, only two orange metal clamps to be applied. I used the old bar to set their position before I put it on the car. The new bushes have Teflon liners so are grease free for life. Went back on easy. Old bished come out of the metal clamps (reused) pretty easily as well with a small prybar There is just enough room to do this without jacking up the rear I put mine on the stiffest straight away. seems a great setting All in all a good investment and modification. Got 400 miles to do tomorrow with dogs in car so that will be a good test S
  20. Rear Seat Squeaking

    Hello, New on here, boldly going with my new 5 door 1.0 ecoboost. It's less than two months old and has developed an annoying squeak from the rear offside. I initially searched the web and checked heat deflectors, hand brake bushes, brake shoes and the rear seat backrest catches. The squeak is only apparent with a single passenger sitting in the middle, rear seat and only when straightening up from a left curve or turn. i.e. if no rear passenger or 2 or more passengers or single passenger on off rear side = no squeak. After much investigation and head scratching I've narrowed the problem down to the rear seat bench. i first looked up how to remove it with instructions telling me it was a very tight fit because of the supporting wire frame locating into hook like brackets next to the seat belt anchors and then the front wire hoops dropping into their locators. On mine the seat bench can be very easily be lifted from the rear before popping up the front locators. Thinking this may be a simple bad install I removed the bench and attempted a better fit. The rear support wire locates without problem into said brackets BUT to get the front loops to locate I have to push the bench backwards (towards the boot) to lign up the front locators. This then allows the seat to be loose at the rear mounts and can once again be lifted out without first popping the front locators. I basically have an ill-fitting rear seat bench that squeaks loudly and annoyingly under the conditions described. Is this something the dealer would be able and willing to cure or even something that has been encountered before along with a possible remedy? TIA
  21. Rear Drop Links Query

    Hi all, I recently had to have the left rear suspension arm replaced when the coil spring snapped. Basically all the bushes etc were seized (I was at the garage at the time & saw the lengths the garage went to trying to remove the assembly). The car drives OK & there isn't any knocking etc, however I was following my car this morning & noticed the left sway bar/anti roll bar looked to be sat lower than the right. I've had a look under the rear & taken a few pics, the left hand drop link looks like its bent in the middle. The right hand one is straight which is how I assume it is supposed to be, I'm a bit confused how the L/H one can be at the angle that it is because the nut that secures it at the top is still in place (unless the bolt section has snapped) but wouldn't it sit lower if it was just "dangling" down. If I decide to have a little "fun" the rear does feel a little loose but it doesn't feel massively unstable when pushing through a corner at speed. Looking at the state of the rubber boots on both I'm leaning towards replacing them, I thought I'd check for any advice on doing the job etc from people more knowledgeable than me! I'm not too bad with a socket set so I'm happy to have a go at replacing them, I just didn't want to start the job & find out there was another part I needed other than replacement drop links such as these http://www.ebay.co.uk/itm/151332257979?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT or maybe some Lemforder ones as I know there stuff seems to be considered good quality. Any advice/input would be appreciated.
  22. Hello all, Late 2005 Ford Focus Mk2 (no mud flaps fitted if relevant). I know that the rusting wheel arch issue with the Ford Focus (mk1 / mk2) is very well documented, but I've only seen photos of it at quite an advanced stage. I check my car for rust every couple of months and today, while running my hand across the rear wheel arch I could feel that it was quite rough in a 5cm section right across the top / middle and a tiny bit of paint actually crumbled off into my fingers. I've attached a photo but it might not be clear enough as it's taken on a phone. Unfortunately I don't have a work light or decent torch. Looking at the photo myself, I can't tell if this is the beginnings of rust or just rough/crumbling paintwork for another reason. Can anyone shed any light? Any advice on what to do next? Cheers, J
  23. My near side rear fog light is not working, I have checked and there is no power going to it, does anybody know what fuse this is on? Otherwise my thoughts are it may be relay as this is the only thing not working Many thanks
  24. Hello I am trying to fit a clip on screen to my 2007 S-Max's rear view mirror. (Reversing camera) I have just bought one but unfortunately the sliding clips on the rear do not open wide enough for to accommodate the width of the mirror. It opens to 3" but needs to be 3.5". Any sugestions would be appreciated. I'm new to Ford ownership and the Ford owners club which I find most useful.
  25. Help Focus Window Regulator

    Hi all im new to this site hopefully im posting in right section. I have a 2002 5door hatchback 1.6 focus. And the drivers door, the cables inside for the electric windows have snapped iv been told its called a regulator so tomorrow im going scrappy to get one. Iv took of off the car seemd pretty simple to remove. But it doesn't connect to the window is tgere anything im missing or does the new one have to connect to the window some how. Any help would be grateful. Thanks guys n girls