AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.

Search the Community

Showing results for tags 'forums/workshop+manual'.

Found 22 results

  1. Hi guys,  I'm basically looking to convert my windows from manual to electric on my Ford Fiesta 2003.  I've recently purchased the car only because the mileage is very low and thought it can last me a while whilst I save up for an upgrade.  I've seen some universal kits and even tutorials on how to fit this. The only issue I have is fitting it on is easy, however how would I be able to actually power them up?  Would it be easier just to buy new doors/cards? Then again the wiring is an issue, can a garage just connect them up?  I would leave it, however it's something I'd like to definitely invest some money (not enough to buy a car) and time in. 
  2. Hello, I've made a bit of a mistake and driven hundreds of miles with my trolly jack and jack stands to my parents house with the intention of putting some new pads on my mark 7 ford fiesta (as they have garage space). However I've left my haynes manual at home which has all the torque specs and minimum disc thickness info. Could anyone on here be a real star and snap/ scan the page at the start of the brake section which has the torque specs and minimal disc thickness info? Thanks in advance, J
  3. I have an original Ford MK1 Cortina Workshop Manual if anyone is interested. Free if you pick up. East London area
  4. Service Manual

    Hello everybody, I'm Anthony from Croatia my dear wife was driving our Focus C-max 1.6 Tdci until she came in front of a huge puddle (60m long)....she stoped...and then decided she can drive through it. She was driving for 50 m very slowly and then the car when Dead. Yes the engine pulled water and it was water shocked. I cleaned everything, air intake, changed engine oil 2 times with filter. The engine started but it lost 30% of power and it makes white smoke in high rpm. So I need to open the engine, yes myself and my brother (we work with outboards and we own several cars so we have to maintain them as well to be able to keep them). I need a service manual for this engine or car model in order to continue. If anyone can help me I would be very gratefull and in return will place photos & descripitons of the work on the forum.
  5. Air Filter Fitting Guides

    Hello all, This is my first post. I've spent a lot of time researching this forum site trying to decide wether or not I should buy a K&N Panel or cone filter or a complete induction kit. I still can't decide... I own a MK5 fiesta zetec(-s?), 1999. First car and i've owned it for a little over 4 months now. I'm wondering if anyone has a guide to fitting an air induction kit please? Should I choose to purchase one, I'd like to know how to fit it in. I think I'm asking because there was discussions about finding your own cold air feed with an induction? Or cone I'm not sure... I understand the air filters don't add much power and to be honest, I'm not after much. It's also for the experience of getting my hands dirty in the engine bay and knowing how things work! Thanks for your help guys. P.s. I know there are numerous posts and topics about air filters but none of them give me the answer I'm looking for!
  6. Hi, Recently purchased some electric mirrors from a 2006 Fiesta ST that I planned to place on my 2003 Fiesta Zetec. I currently have manual mirrors. I have purchased wiring loom for the conversion. Any recommend instructions?? Thanks!! :)
  7. Workshop Manual

    Has anyone got any pdf files or screen shots from any of the Timing belt changing manuals that would cover the mk2.5 1.6 zetec focus? been looking to buy the auto data timing belts 2012 book from amazon but seems to be out of stock for a good while now. are they any manuals for this job (timing belt change) anyone can recommend? at the moment all I have to go with is the Haynes workshop manual. Thanks in advanced.
  8. Mmt6 Gearbox, Lost 5Th

    Hi Gang I put this problem on Talkford a few weeks ago but didn't get much support so I'm hoping that someone on here has got a clue to what is wrong with my car. My car is a 2007, MK4 Mondeo Titanium X, TDCi 2.0 Diesel, manual gearbox, 140PS and 130k miles on the clock. For a few weeks I've been hearing a squealing sound whenever I'm in 5th gear, and only 5th gear. It's the kind of noise you hear from a train as it pulls up to a station, a high pitched metallic squealing. I was able to accelerate through the problem after a few seconds. It was like a very heavy/clunky automatic gearbox shake when it cleared. I've been living it because I couldn't figure out for certain what it was. I've suspected a vacuum hose split, vacuum solenoid sticky, turbo actuator sticking, gearbox oil needs changing all seem to lead to a dead end. 4th and 6th gear have no problem at all. Tonight, driving home I heard the squeal even before I put my foot back on the throttle, just as I lifted the clutch pedal. Now, I have no 5th gear at all. When attempting to select 5th gear now it's like selecting neutral, just no drive at all. I've spent hours searching online for anyone who's had a similar problem but can't find anything. It seems to me that the gearbox is knackered but I've never experienced such a rapid onset of a problem like this. I heard no crunching, whirring, grinding or anything unusual from the gearbox since I bought the car around 4 months ago. Only work I've had done is a new cambelt, aux belt, water pump (other side of the engine), air and oil filters and that's it. It's starts, runs and drives in all other gears perfectly. If anyone knows anything about these MMT6 gearboxes, I'd appreciate a suggest. Maybe a selector fork failed? I dunno. Cheers
  9. Hi guys i bought a 2011 Ford Focus 1.6 Sport Special Edition last Saturday but no manuals came with it unfortunately now i know the SD card is missing from the sat nav as well i am hoping you can point me to where i can locate the manuals and sd cards had no luck been looking for days all manuals seem to be on line except the one i need very frustrating. Hope you can help:)
  10. New Member

    Hi Just joined few minutes ago. I have a Focus Sport 1.6 with built-in SAT NAV, but no manual for it. Does anyone have a PDF copy of the manual that I could have. There's a picture of it attached. Thanks Barry
  11. Hi there i have a 53 plate ford fiesta durashift which wont start and has the code p0810. I was just wondering if anyone could give me a detailed run down of how to change it to manual??????
  12. After I "washed" it

    From the album Mk6 fiesta zetec

  13. Hello, I have a 2004 Fiesta Finesse which has recently been showing signs of a faulty Slave Cylinder. I had the master cylinder replaced a few months ago when the clutch pedal dropped to the floor and would not return. I read about the clip that holds the rod in place with the pedal (it wasn't that). The car has been working ever since the Master Cylinder was changed and now I've lost all pressure my suspicions are that it was never the Master but the Slave. I recently bought a Vizibleed One Man Bleeding System from Halfords (£5.99) - and have had a bit of success but lost pressure again. I used a brick to press down the clutch pedal all the way to the floor, opened up the slave cylinder bleed screw (Non tool requiring switch looking thing?), watched fluid enter the Vizibleed carton, closed the valve once no more fluid & air came out, then depressed pedal and repeated. Can someone please tell me how to use this device correctly? I feel like I'm doing everything wrong... Here's the method I've used in bullet point format : 1. Press pedal all the way to the floor, hold with heavy brick 2. Open up bleed valve and wait till fluid stops coming out 3. Close Valve 4. Release pedal back to up position 5. Press pedal to floor, hold with heavy brick 6. Repeat number 2 Is this correct? Am I meant to keep the reservoir cap off or on? Should the end of the tube that goes into the Vizibleed carton be immersed in fluid (it has a a ball bearing at the bottom to stop air coming back up in the line)? I am so frustrated as I got pressure back and then lost it.... Any help would be greatly appreciated!! M
  14. Hi all I have spent the last few months trying to get a fiesta 1.4 durashift semi auto back on the road and I am stumbling at the last hurdle!! I first went down the route of relying on someone else to repair my clutch actuator only to be ripped off to the tune of £130 (STEER WELL CLEAR OF ECU SOLUTIONS WALES). After being ripped off I decided to have a go at converting the car to a manual. I have sorted all the mechanical side and the wiring the car now starts and drives hurray!! The only problem that I now have is that the speedo does not work. The problem that I am having is that my car has abs and the speed is calculated from the abs sensors rather than a vehicle speed sensor. What I am after finding out is the pcm/ecu part number from a 2003/2004 1.4 duratec engined car with abs as the donor car that I got the ecu from did not have abs. MANY THANKS IN ADVANCE DANNY
  15. Hi There!

    Hi all, I am currently driving in a 1.3 Fiesta Finesse which I have had for just over a year and I'm just looking for some advice on things to do to my fiesta to make look a bit cooler and general up keeping of my wee ford. Thanks for reading!
  16. Quite an amusing video worth a watch!
  17. Engine/gearbox Compatibility?

    Hi. So ive got a 1.8 mk1 focus zetec. The bottom end is rattling, hence; knackered. However, im looking to do an engine change. I've spotted a mint 2.0 automatic engine. Question is, will this fit straight up to my manual gearbox and is there any ACTUAL difference between a manual engine and this one that i need to be aware of? All help welcome.
  18. Streetka Manual

    Hiya , I'm new on here, just wondered how I go about getting a Streetka manual?? Rang my local Ford dealer but no joy :(
  19. Hi All Ford Lovers

    Hi all,I am from Croatia,have Ford Focus mk2 (2006) 1.4 I have him since i get my licence,so it is 1year. I didnt made any big changes,little mods in interior.When sunny day comes i will do exterrior changes also,here is snow :( I am now saving for Focus ST 2006.And my dad had sierra when i was younger,i learned to drive on sierra,good memories :D P.S if anyone have worshop manual for Focus Mk2,I beg you pls send me,i would like to do some work on it and i dont want to damage anything.
  20. I have recently purchased a Ford Focus 1.4 CL (1999) T Reg. The car has manual central locking, although i would like to know if it is possible to adapt the car for remote central locking? Would be grateful if i could receive some help on whether i can do this, what i need for it and how much it would likely cost?
  21. Hello, I am looking for a complete walk through on turning my manual windows to electric. Currently my passenger window is being held up with Sellotape until I get a few days off to fix it, but I though I might aswell turn them electric while I'm at it. I've been told the wiring is probably already there, is that true? What do I need to buy? A full walk through on what I need to do? And any hints and tips? Thank you :)
  22. Stupidly I left the car a 2006 Ford focus unlocked someone opened it up and took various bits & pieces including the owners manual & service history booklet - can they use these to get a key made?