AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.

Search the Community

Showing results for tags 'gallery/Interior+Lights'.

Found 245 results

  1. Morning all Been trowling through the net for this, and cant find anything, so apologies if its already been answered/posted. Please feel free to just point me to the thread if so.  Sooo. I got my Mk 2.5 1.6 tcdi Zetec the other week. Looking to do a few bits to improve it. One of which is the interior lights. I always liked having the map readers in my Seat Ibiza, so id like to upgrade to the same. A little disappointed in the trim of this car to be honest, VERY basic. But hey ho.  Anyone done this? easy? looks easy enough to be fair, but any indications on what part to get / good place to look? When i do an ebay search it mainly comes up with just the bulbs and not the unit its self.   Im also not against the idea of installing the courtesy light in the rear too.... its not a major want, but possibly look into it too. This easy to fit also?   Any help appreciated :)  
  2. was wondering if anyone knew how to keep the footwell lights on when your driving the car in question is a mk7.5 black edtiom
  3. Mk2.5 to mk2 rear lights

    I am wanting smoked rear lights to my mk2.5 focus, and all the better looking units ive found are apparently for the mk2. Do these fit? They look VERY similar! Thanks
  4. Hi guys,  new on here so any help i sappreciated. Bought a Focus st and few minor issues Firstly electric mirrors do not work at all Secondly interior lights do not come on when i open the doors (switch is in correct position) Rear interior lights do not come on either at all, even when i switch on manually (fitted new bulbs) 12volt also doesnt work (prob just a fuse though) Thanks for the help  
  5. Hi all, I've got a mk2.5 focus with the standard 1 bulb interior light in, now I was just wondering about changing it to one with map reading lights, I've seen some on eBay and I'm not sure if it's the correct one for my car or not and just wondered if they just plug straight in or will have to rewire, if anyone knows I'd just like a bit of advice 😊 Thanks
  6. Hello all, While I was fitting in the upgrade centre console I discovered that my window heater section had all wires in the other blank spaces - so was wondering if that would mean that the wiring is there for the other options? I ask this as I've just brought that section in silver and that has the button for the front heated screen - it looks like i have the wiring for that, well I'm guessing, so was thinking of getting one installed as that is a feature i massively miss from my fiesta. pictures - this is the part i mean and theres two extra wires/connections in the back of the other two blank cards so i really am hoping someone might provide me with some good news here ha! Also im wanting to take out the standard door card handle parts and replace with the silver higher spec one. I just cant work out how to remove that part?!?! can anyone help with that one too please? Its the surround bit that on the driver side sits over the window and mirror controls. Drivers side Passengers side I know how to take the door cards off etc but I'm not sure how to get these parts free to replace them - i don't want to change to the different door cards as they are a different colour and that will bother me - ha! its bad enough the centre console is a different colour but i can live with that cause of the added aux it adds. cheers in advance anyone
  7. Hi Guys I have just had to use my rear fogs since i purchased my car last year on returning from a journey i noticed the lefthand/nearside one was not lit reading on talkford forum it appears there was a change from Mk3 twin rear fogs to Mk3.5 single rear fog, if that is the case, is there any parts i can purchase to bring it back to twin rear fogs, it looks stupid with a red lens cover on thaf side if not working or in use, please advise if anybody has done this conversion and any part numbers used ??, best of the 2016 season to all fellow members huey45
  8. It is interesting how many Fusions have bad water ingress in the rear lights. Mine is a 2009 with water in both, despite sealing the bulbholder and everything else. Looking at Ebay and scrap yards I've found most of them to be the same when you ask or examine on a wet day. Even a 2011 car with water in both lights. Is it a manufacturing problem as a local dealer said he had replaced stacks of them. Nice, as they are £100 each inc fitting or £75 if you do it yourself, and only a 12 months warranty. I have had cars all my life and never any water ingress, only plastic fading on son's 2001 car. The Fusion lights must be badly designed or very cheaply made!
  9. All, I'm a newbie on the forum and have changed my interior LEDs to blue to match my candy blue Fiesta S. Just looking for a guide to whip out the centre cupholders and change the LEDs to blue. Any suggestions? Or anyone know of a guide to do it? Ta thanks in advance! CJ
  10. Hi all, I need to get my rear and front fogs working for the MOT test but for the life of me I can find the fuse for either and nothing is mentioned in the fuses section under fuses, can anyone help? Not sure if relevant but the light on the button for rear fogs doesn't illuminate when pressed however the front fogs button does. But as I said neither front nor back fogs light up! I even checked every fuse on the relay panel and they're all fine. I did see a fault diagnostic page for a streetka which mentioned [CHECK fuse F27 (20 A) (CJB).] Does' anyone know if such a fuse exists on the streetka? And if so where it would be located?
  11. GT500 interior

    From the album Work 3SixtyWraps

  12. Fitting St Rear Bumper

    Hi Everyone, think the forum is fantastic and you guys certainly know your stuff, found so much info that has helped me so much, its been a god send. I am a newbie on here but was hoping that you guys may be able to give me some advice. I bought a new focus 2.0 titanium tdci and loved the inside and spec, (previously owned a mk1 and then a mk 1.5.) I don't want to offend anyone but the outside of the mk2 in my opinion was a bit of a disappointment did not like all the black plastic lower bumpers- so started off colour coding. Then coming across this place I started to get the urge to take things a little further so along came a set of ST alloys, then decided to get the Side skirts , and then the front bumper and now just collected a complete rear bumper. Which brings me to my question. Sorry I do tend to babble a bit. On the current bumper I have the reverse sensors but on the St bumper there is no holes I have seen the guides on here and also noticed the guides on the inside for drilling but was wondering will the existing sensors come out of the original bumper and be able to use them on the ST one? I did have the panel off for spraying but did not really pay much attention to them. Or will I need to buy any brackets etc. With the weather being so bad I don't really want to take the panel off until I have finished spraying the ST bumper and ready to fit the new bumper. Thanks for any advice you can give me. :)
  13. IMG 1538[1]

    From the album My Fezbomb

  14. IMG 1535[1]

    From the album My Fezbomb

  15. IMG 1533[1]

    From the album My Fezbomb

  16. IMG 1526[1]

    From the album My Fezbomb

  17. Hi everyone I've just bought a 2011 focus 1.6 Zetec with12.000 miles on very pleased with the car but there is a few marks on the centre console and the buttons on the radio/sat nav are crinkly, please see attached photos. Just wondered if anyone has had this problem and where can I get centre console plastics, and finally is it possible to replace just the buttons on the radio ??
  18. Hi all, I have recently purchased some upgrade l.e.d tail light units from ford. Took 4 weeks to arrive as ford didn't have them in stock, this is very true as the manufacture date on the units is dated 8 days after my placement of order last month. Guide now available in PDF Format see link: Tools Required: 1 x Philips head screwdriver 1 x socket driver 1 x Torx T25 Screw driver bit so in the big box we find two smaller box's with ford fitting instructions, These units are very light weight at only 2.4kg including packaging. Ford instructions are not very helpfull as you can see below lol So let's see what's inside the inner box's To my surprise they are supplied with bulbs, But I don't like the fried egg effect of the indicator bulbs so I'm immediately fitting some silvatec BA++ offset bulbs. Before: After: Much better :) As above images only opposite side, If purchasing these from a breakers or ebay; you can strike lucky and pick up a bargin as some sellers are not aware of the l.e.d units value. Such as this seller: pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item338207c6f0 Notice the difference in the lens; the ford l.e.d unit has straight lines etched on the lens. The standard dual filament bulb units have a diamond etched lens.
  19. Hi, I have a 2007 Transit Connect Torneo LHD, I had a problem with the n/s/r stop and tail lamp connections, they kept touching when the bulb was inserted and blowing the fuse, unfortunately when I tried to move the contacts on one occasion I had left the lights on, this caused something to blow, not the fuse that had blown previously, I now can't find any fuse that is blown and I have now side lights. Any ideas please. Cheers Steve
  20. Hi, I've just acquired a Smax and found the reversing lights do not work. the lamps are good and the reversing camera and parking sensors work. I linked out the switch wire at the gearbox and the camera came on and sensors worked. I thought maybe a fuse, but the reversing lights are on with the raising headlights and that's work also. I'm a bit stumped as to what to check next. Any ideas please????
  21. Hi guys hoping one of you may be able to help me. I've read a few threads on here about problems with interior lights stopping working for no apparent reason but none of them seem to have the solution on them. So today all my interior lights have stopped working. They were fine this morning but tonight nothing. No boot light, no rear interior light, no front interior light no map lights. Strange. So obviously first thought is "ahh the fuse has gone." Get out the handbook, guess what, you got it no fuse is listed for interior lights? Only one that remotely could be is fuse 1 which includes a dome light? whatever that is but also controls the ignition and heated windscreen which both work fine so can't be that one. Some threads mention that there is no fuse for this circuit which is a little odd. Of course it's pitch black as well so I can't easily start checking every damn fuse in the fuse box to try identify the little blighter so I'm hoping someone knows? If there genuinely isn't a fuse how the hell do you get them to work again or am I destined to pay several pounds to my dealer to get such a simple problem fixed. Also I've realised my offside headlight has stopped working tonight as well. Can't be a coincidence can it? There's no fuse for them listed other than the full sides exterior lights and the DRL and rear light work fine. Could just be the bulb but I don't believe in coincidences so any help will be appreciated. Frustrated fez owner!!!!!!
  22. Interior

    From the album My little Ford

    Leather seats...mmmm....
  23. Lights And Lorries

    Now the dark nights are on us and with the clocks going back the hour last week. Why is it if I put on my lower fog lights ( I know FOG Lights are for Fog only )for a bit of extra illumination and the local traffic officers are around I get stopped, and warned about using fog lights and run the risk of a fine, Yet I`ve seen numerous lorries lite up like a Christmas tree with lights and lights in there cabs of all colours yet nothing is said to them ?. Fair enough I would`nt like a lorry to be just running on side lights as this could be dangerous .But some of them driving along the motorway especially on the opposite carriage way can be a distraction. Opinions anyone ? And I`ve already said I know your lower fog lights should only be used in fog ,but surely every bit of light helps. Oh on that note ,Followed a car on my way to work .No Rear lights at all ,Flashed the driver 3 times no response ,Finally pulled along side it at the lights and got them to drop there window .Told them they had No rear lights and the response was .Well they are automatic and come on by themselves ?. Well its dark and they haven`t .Oh and it was a female driver . Glad I was going in the opposite direction
  24. Hiya I have just brought a Fiesta Zetec S 2007 Model and I am trying to work out what bulbs I need for the rear drivers side brake light and for the central high level brake light? If anyone could tell me which bulbs to buy for each brake light that would be brillant Thanks in advance