5 replies to this topic

[yusuf]

H i All you good peaple,

i have a ford galaxy model 2002 1.9 TDI. the front heating blower only works when set to 3 and 4.

it does not work when set to 1 and 2.

ant idea why or what it could be

[artscot79]

H i All you good peaple,

i have a ford galaxy model 2002 1.9 TDI. the front heating blower only works when set to 3 and 4.

it does not work when set to 1 and 2.

ant idea why or what it could be

it needs a new resistor mate

[yusuf]

hi there,

done the trick and only cost £26.00.

thanks a million

[artscot79]

hi there,

done the trick and only cost £26.00.

thanks a million

its happened to me on a few cars mate they always go on 1 and 2 as thts the most commonly used setting

[Glaxay55]

This happened on my vauxhaul Astra and was a simple resistor swap out, which was next to the blower accessed from under the filter in the bonnet. Where is the resistor unit on the Galaxy (2000-2006)? Many thanks

[KevK]

I have the same problem.When the dial is switched to 1 or 2 it doesn't work but the air con does.When switched to 3 or 4 the fan works but the air con goes off.

I had a new resistor fitted today and now on 1 the air con is on but no fan.On 2,3 and 4 the blower works but no air con.

Any ideas ?