Jump to content


Show
Photo

Ford Ka - Heater Fans Not Working


  • Please log in to reply
3 replies to this topic

#1 Stewart1982

Stewart1982

    Newbie

  • New Member
  • Pip
  • 4 posts
  • Ford Model: Ka 3
  • Location:

Posted 07 March 2010 - 09:27 AM

Hi,
Recently the heater/cooler fans stopped working all together in my girlfriends Ford Ka, its a 97 R reg.
Basically its as if theres no power at all going to them, checked fuse and its fine.
Obviously a big problem as its really hard to demist without them!!
Any suggestions where to start would be most appreciated,
Thanks

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 L S Auto Repairs

L S Auto Repairs

    Settling In Well

  • New Member
  • PipPipPip
  • 57 posts
  • Ford Model: fiesta
  • Location: Hertfordshire

Posted 08 March 2010 - 12:35 AM

Does the heater work on any off the speed settings i.e on no 4 and not 1, 2 and 3 or non at all?

are you geting power to both sides of the fuse?

I would buy a haynes manual and look at the wiring diagrams to see what is in the circuit.

make sure your getting good earths and that your getting a live feed to the switch, to the fuse, to the heater resistor and the heater blower motor.

#3 Ford Own Rs Demons

Ford Own Rs Demons

    Member

  • New Member
  • PipPip
  • 27 posts
  • Ford Model: Cubboard is bear

Posted 13 March 2010 - 05:51 PM

fan speed resistor?

#4 artscot79

artscot79

    Ford Enthusiast

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 6,887 posts
  • Name: arthur
  • Ford Model: focus mk2 ti-vct
  • Year: 2006
  • Location: Fife

Posted 14 March 2010 - 06:37 PM

Does the heater work on any off the speed settings i.e on no 4 and not 1, 2 and 3 or non at all?

are you geting power to both sides of the fuse?

I would buy a haynes manual and look at the wiring diagrams to see what is in the circuit.

make sure your getting good earths and that your getting a live feed to the switch, to the fuse, to the heater resistor and the heater blower motor.



if the resistor pack has gone you wont get anything they dont always work on 4 only when they go check the fuse if you have power ide change the resistor


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users