Jump to content


Photo

Boot Inner Trim Removal.


  • Please log in to reply
5 replies to this topic

#1 BlueFox

BlueFox

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Ford Model: Mondeo zetec tdci 130

Posted 07 March 2010 - 12:33 PM

Hi all have a problem with my rear washer, when used it is not spraying onto rear screen but into the boot! Anybody got a sequence in removing the inner trim in the boot so I can get at the feed pipe! Thanks Dave.

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 chris bowman

chris bowman

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 255 posts
  • Ford Model: ford mondeo 2.0lx tdci 115

Posted 07 March 2010 - 05:45 PM

on the iside of the boot at the top in the middle there is a short piece of trim. this is held on with 2 screws. behind u should see the jet washer. i would have thought the pipe has come off it!

#3 BlueFox

BlueFox

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Ford Model: Mondeo zetec tdci 130

Posted 14 March 2010 - 07:39 PM

on the iside of the boot at the top in the middle there is a short piece of trim. this is held on with 2 screws. behind u should see the jet washer. i would have thought the pipe has come off it!



Cheers Chris, had a look and the pipe is on the jet? It seems to be squirting into the boot from around the top of the offside wheel arch ?

#4 chris bowman

chris bowman

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 255 posts
  • Ford Model: ford mondeo 2.0lx tdci 115

Posted 14 March 2010 - 08:29 PM

[quote name='BlueFox' date='14 March 2010 - 07:39 PM' timestamp='1268594944' post='71313']
Cheers Chris, had a look and the pipe is on the jet? It seems to be squirting into the boot from around the top of the offside wheel arch ?
[/qok take out the parcel shelf and collapse the rear seat back on the drivers side.u need to remove the plastic unit that the parcel shelf sits on on the drivers side of the car. i think there are 3 or 4 screws. then u will see to plastic circles on the roof lining just above. these pop out so that u can see the mounting screws. carefully just pop these to out. then u will see the washer pipe and a right angle junction that very often comes undone. pop this back together and put ure car back together!

#5 BlueFox

BlueFox

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Ford Model: Mondeo zetec tdci 130

Posted 19 March 2010 - 06:24 PM

Cheers Chris that was the problem, the pipe had come away from the right angle fittingt.
Thanks again Dave.

#6 chris bowman

chris bowman

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 255 posts
  • Ford Model: ford mondeo 2.0lx tdci 115

Posted 19 March 2010 - 06:41 PM

Cheers Chris that was the problem, the pipe had come away from the right angle fittingt.
Thanks again Dave.

ure welcome

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users