External Temperature Guage

[jbbkt]

I have a new fiesta "trend". I bought it in france so am not sure if the models are the same as the UK, I think it is the one up from the very basic model.

My question is this:-

On my dash between the clocks is a 2 line display, the bottom line shows the trip and total distance done but there is nothing on the upper line. I have seen that this is where the external temperature would be shown normally.

Is there anything I can do to get this visable? Is there anyway of knowing if the sensor for the external temperature is already fitted?

Thank you in advance for any help you can give.

[dannyhilton]

Not sure fella. I know for my temp figure to work I need to have the car in ACC model, so the key is turned all the way just before turning the car on. Mine has a 3-line display, but I don't think that should make any difference. Have a look at the specs of your car on the site below, mine says something about a temperate module. (Listed as Outside Temp Thermometer)

http://www.etis.ford.com/home.do

Good luck. As for retro-fitting, I'm no help here sorry.