Jump to content


Photo

Mk2 Rear Courtesy Light


  • Please log in to reply
6 replies to this topic

#1 DeeBe

DeeBe

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 104 posts
  • Ford Model: Peugeot 308 Sport/Peugeot 207 Sport

Posted 19 April 2010 - 08:34 AM

Hello!

I have a mk2 Focus on a '56 plate. One thing that annoys me is that I don't have a rear courtesy light. I have sourced one from eBay which is a proper one from a mk1 Focus Ghia, and I have the correct retaining ring, but I was wondering if it is indeed possible to fit it to my car. I.E is there space at the rear of the headlining to fit it?

Thanks in advance.

Dave.

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 artscot79

artscot79

    Ford Enthusiast

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 7,933 posts
  • Name: arthur
  • Ford Model: focus mk2 ti-vct
  • Year: 2006
  • Location: Fife

Posted 19 April 2010 - 10:04 AM

Hello!

I have a mk2 Focus on a '56 plate. One thing that annoys me is that I don't have a rear courtesy light. I have sourced one from eBay which is a proper one from a mk1 Focus Ghia, and I have the correct retaining ring, but I was wondering if it is indeed possible to fit it to my car. I.E is there space at the rear of the headlining to fit it?

Thanks in advance.

Dave.



if in doubt test the depth with a sewing needle you may find theres polenty of room there to fit the light in

#3 DeeBe

DeeBe

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 104 posts
  • Ford Model: Peugeot 308 Sport/Peugeot 207 Sport

Posted 19 April 2010 - 10:20 AM

Good idea!!! I'll do that! Cheers Art.

#4 artscot79

artscot79

    Ford Enthusiast

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 7,933 posts
  • Name: arthur
  • Ford Model: focus mk2 ti-vct
  • Year: 2006
  • Location: Fife

Posted 19 April 2010 - 04:11 PM

Good idea!!! I'll do that! Cheers Art.



i find its easier than ripping headlining off and all the associated trim you can do it all without removing headlining uyoull just need to give the car a good hoover though a wire coat hanger with the wire taped to the end and pushed through from the front courtesy light to youre precut hole is the easiest way and with a shrp stanley you can cut the lining first without removing it

#5 hawker

hawker

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 217 posts
  • Ford Model: 2006 Focus 1.6 TDCi
  • Location: Cardiff

Posted 20 April 2010 - 07:51 PM

I miss not having a rear courtesy light.

If you manage to get this done, I'd really appreciate if you could post up a guide on how to do this mate.

;)

#6 artscot79

artscot79

    Ford Enthusiast

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 7,933 posts
  • Name: arthur
  • Ford Model: focus mk2 ti-vct
  • Year: 2006
  • Location: Fife

Posted 20 April 2010 - 08:00 PM

I miss not having a rear courtesy light.

If you manage to get this done, I'd really appreciate if you could post up a guide on how to do this mate.

Posted Image



its quite easy the wiring is simply taken from the front so youre simply taking a feed from the first wire to the same point on the rear light and you do this with the 3 i had a how to somewhere ill see if i can find it

#7 hawker

hawker

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 217 posts
  • Ford Model: 2006 Focus 1.6 TDCi
  • Location: Cardiff

Posted 20 April 2010 - 08:15 PM

Cheers art ;)

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users