My Fiesta Wont Start

[Jordan L]

Hi,

I've just recently picked up my fiesta. Its a 1.25 16v zetec 1998 reg. I've been driving it around for a couple of days and its been running fine. On the Sunday night I stalled it and when i tried to start it back up it kept on cutting out. After many attempts i got it started again and got it home. So the next day we checked the car and we were advised it might be the spark plugs or idle control valve as the engine would started sit on 1000revs then cut out. So we changed all that today but still nothing. Ive been advised to change the crank sensor which im gonna try and do tommorow. I was just wondering if anybody else has had a similar problem and could help me try and help me fix it !?!

Thanks

[titanium_s_spec]

Hi,

I've just recently picked up my fiesta. Its a 1.25 16v zetec 1998 reg. I've been driving it around for a couple of days and its been running fine. On the Sunday night I stalled it and when i tried to start it back up it kept on cutting out. After many attempts i got it started again and got it home. So the next day we checked the car and we were advised it might be the spark plugs or idle control valve as the engine would started sit on 1000revs then cut out. So we changed all that today but still nothing. Ive been advised to change the crank sensor which im gonna try and do tommorow. I was just wondering if anybody else has had a similar problem and could help me try and help me fix it !?!

Thanks

hi and welcome not a bad rquest for some 1 to fix your car on the first post :P :P

[I will fix it!]

Hi,

I've just recently picked up my fiesta. Its a 1.25 16v zetec 1998 reg. I've been driving it around for a couple of days and its been running fine. On the Sunday night I stalled it and when i tried to start it back up it kept on cutting out. After many attempts i got it started again and got it home. So the next day we checked the car and we were advised it might be the spark plugs or idle control valve as the engine would started sit on 1000revs then cut out. So we changed all that today but still nothing. Ive been advised to change the crank sensor which im gonna try and do tommorow. I was just wondering if anybody else has had a similar problem and could help me try and help me fix it !?!

Thanks

2 things possibly to try, potentiometer for the cutting out if not possibly a butterfly valve which sits in the inlet manifold. Both cheap and an easy fix. i would start with the potentiometer! Finis number 7173046 but check with dealer with your chassis number.

[Jordan L]

Hi,

Just an update my car still isnt running but ive had the AA out twice chnaged my spark plugs,leads,idle control valve, coil pack, crank sensor still has the same problem so i got it tooken to the garage with the AA and apparently my ECU is faulty so now im forking over more money to get it sorted fingers crossed