Jump to content


Photo

Engine Problems


  • Please log in to reply
7 replies to this topic

#1 pickle

pickle

    Newbie

  • New Member
  • Pip
  • 2 posts
  • Ford Model: mk3 mondeo 1.8petrol

Posted 09 July 2010 - 10:42 PM

my mondeo runs and drives fine then it looses all power so have to pull over and turn ignition off and start it again but constantly the same problem . can anyone help

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 mintalkin

mintalkin

    Ford Enthusiast

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 3,543 posts
  • Name: mintalkin
  • Ford Model: mondeo tdci 130
  • Year: 2006
  • Location: Staffordshire

Posted 10 July 2010 - 07:45 AM

does the eml flash when this happens?,it could be many things from a blocked fuel filter to a cam/crank sensor without inspection its hard to say.

#3 pickle

pickle

    Newbie

  • New Member
  • Pip
  • 2 posts
  • Ford Model: mk3 mondeo 1.8petrol

Posted 10 July 2010 - 08:20 AM

ive had a new fuel filter put on along with a pump, coil pack, plugs, throttle poisision censor, oil and filter, and a new cat

#4 mka306

mka306

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Ford Model: Modeo ST220

Posted 12 July 2010 - 12:11 PM

I have just put my ST220 into the garage with the same problem, the engine management light came on but they could'nt find a fault so they have asked a Fors specialist to come and look at it and i am awaiting an answer, as soon as i get one i will post the findings.

#5 mintalkin

mintalkin

    Ford Enthusiast

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 3,543 posts
  • Name: mintalkin
  • Ford Model: mondeo tdci 130
  • Year: 2006
  • Location: Staffordshire

Posted 12 July 2010 - 04:17 PM

if the eml came on there should be a fault code in the ecu.

#6 mka306

mka306

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Ford Model: Modeo ST220

Posted 13 July 2010 - 07:25 PM

if the eml came on there should be a fault code in the ecu.

Now a ford specialist has found the fault and confirmed why the engine light came on, there was no code because the fuel pump had a fault and it caused a drop in pressure with the fuel flow, which in turn made the engine show a fault but without a code as there was'nt one. My advice would be to get it checked, what have you got to lose.

Hope it helps.

#7 jmurray01

jmurray01

    Too much time on the boards

  • True Ford Enthusiast
  • PipPipPipPip
  • 777 posts
  • Name: Jamie
  • Ford Model: Ford Fiesta Flight 3dr 1.3 Endura-E
  • Year: 2001
  • Location: Moray

Posted 14 July 2010 - 04:49 PM

Probably a bad ECU I'm afraid!

#8 mka306

mka306

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Ford Model: Modeo ST220

Posted 16 July 2010 - 08:46 PM

got my mondeo back today and all is well again, the fuel pump was fixed and now there are no power issues, in my case there was no fault with the ECU.

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users