Jump to content


Show
Photo

Exhaust Back Box


  • Please log in to reply
2 replies to this topic

#1 blueovalcraig

blueovalcraig

    Member

  • New Member
  • PipPip
  • 23 posts
  • Ford Model: 2009 Ford Focus Zetec S 1.8 TDCi

Posted 16 July 2010 - 09:00 PM

Hey folks,

Do you think a ST rear silencer would fit straight onto my Zetec S?

Posted Image

I'll try and get a better photo of back end tomorrow. This is all I have at moment.

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 ford focus edge

ford focus edge

    Too much time on the boards

  • New Member
  • PipPipPipPip
  • 775 posts
  • Name: Mike
  • Ford Model: Focus 2.5T ST-2
  • Year: 2008
  • Location: Cheshire

Posted 16 July 2010 - 09:16 PM

I really doubt it mate number one ul have to hack the hell out of the rear splitter and hope it all matches on both sides, then youl need to see if itl fit under the car becasue they either run down the middle of the car and split of at about 3/4 of up the car OR run up like a normal exhaust and then split at a box which will seprate of into the twin pipes.

You may also loose alot of back preassure by doing this.

What u cud do is get in touch with somewhere like powerflow who design exhausts for you they might be able to design a "duplex" system for a 1.8tdci.

Mike

#3 artscot79

artscot79

    Ford Enthusiast

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 6,901 posts
  • Name: arthur
  • Ford Model: focus mk2 ti-vct
  • Year: 2006
  • Location: Fife

Posted 16 July 2010 - 10:05 PM

I really doubt it mate number one ul have to hack the hell out of the rear splitter and hope it all matches on both sides, then youl need to see if itl fit under the car becasue they either run down the middle of the car and split of at about 3/4 of up the car OR run up like a normal exhaust and then split at a box which will seprate of into the twin pipes.

You may also loose alot of back preassure by doing this.

What u cud do is get in touch with somewhere like powerflow who design exhausts for you they might be able to design a "duplex" system for a 1.8tdci.

Mike


agreed simply whacking an exhaust that wasnt designed to fit can cause a lot of issues and loss of power you would need to get a duplex system as stated or an aftermarket copy


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users