Key Fob

[geardy]

I have a 2000 mondeo mk2 my keyfob stoped working and I was looking to reprogram it. Mine is the 3 button fob. So far I have had no joy but I have noticed that the red light beside clock is lit and has stayed lit even now a week after I 1st tried the reprogram and I can hear a click when car is running like a indicator going. Just looking to c if Any 1 had any ideas cause my central locking won't work with key and I can't get into my boot as only way in is using button on key fob. Any ideas would be grateful.

[mattkh]

I have a 2000 mondeo mk2 my keyfob stoped working

Hi

Have you tried a new battery in the keyfob?

[dezwez]

hi give this a look over it works on focus as well

http://www.mirez.co.uk/KeyProg.htm

[geardy]

Yeah new batterys tried and tried link think the car is stuck in learning mode because the red light beside clock is staying on but won't go out

[mattkh]

Hi

If it is safe to do so, disconnect the negative terminal of the car battery. Wait 2 minutes then reconnect.

[geardy]

cheers will check latet let u.know how i get on

[artscot79]

cheers will check latet let u.know how i get on

solid light usually means an issue with the immobiliser you have nt tried a new key as well just the fob?

[geardy]

solid light usually means an issue with the immobiliser you have nt tried a new key as well just the fob?

Tried to disconnect battery but never reset light, light staying on slight flash to it. Problem just came from no were same fob same key i always used