Jump to content
Do Not Sell My Personal Information


Engine And Transmission Light


suraj
 Share

Recommended Posts

Car: Ford Fiesta

Year 2007 57 Plate MK 6

I require some help and advice from fellow forum users. Yesterday evening i got inside my car and turn the key once and again twice when the engine and transmission light came on (engine was still off at this point) saying engine malfunction refer to owners manual. Owners manual only told me what i already knew that the light is engine and transmission. I switch for about minute or 2 (removed the key totally) and then that message and light went away. I drove home no light appeared at all.

Then..... Today i drove the car approx quarter of a mile and then engine and tranmission light came on again, i pulled over for 5 minutes switching off the engine and then retried and then message went away and did not appear at all for the duration of my commute (15 miles).

Please can anyone advise me on whether this a common problem or whether it worrying about? Your comments will be mosted welcomed.

Link to comment
Share on other sites


sounds like you have an intermittant problem,if the eml has come on it should have stored a fault code which will have to be read s as to asatain the problem.

Link to comment
Share on other sites

The issue has not come back since yesterday morning. I have ordered a Obd2 cable and software to read the codes. So hopefully its not a major issue.

Link to comment
Share on other sites

Had 3 Engine malfunction errors which disappear after a few minutes, or upopn restarting the car. However, every time it has been to the garage, the fauklt is never logged by the ECU. Have you ever heard such poor programming? Errors that don't write to the log files?

Software upgrades solve the problem so I will assume the problems are purely software bugs as opposed to actual mechanical/electronic failings in the vehicle.

Link to comment
Share on other sites

will ford do the software upgrade ? my car is still under warranty so if it is covered i rather do it now than later.

Link to comment
Share on other sites


The issue has not come back since yesterday morning. I have ordered a Obd2 cable and software to read the codes. So hopefully its not a major issue.

Hi Suraj, where you getting the Obd2 cable and software from? Am after some myself and had a look on t'interweb but they all seem to be about the £70 bracket.

Paul.

Link to comment
Share on other sites

Im getting the software and cable from eBay (two different ebayers). The software was about £5 and the cable is about £15. Once i receive it i will post back saying how good it is. i planned to use it on many different make and model of cars.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=270554091779

Link to comment
Share on other sites

  • 4 weeks later...

I got my car booked in at my local ford dealer to get the engine and transmission light checked out. They repaired the problem by replacing the glow plugs and the glow plug relay, the good thing was it was done under the warranty.

If anyone know in a diesel especially my 1.6 TDCI MK6 that when do the glow plug get used? my understanding was only in cool temperature but know i like to know approx how cold the temperature requires to be.

Link to comment
Share on other sites

Hi Suraj, where you getting the Obd2 cable and software from? Am after some myself and had a look on t'interweb but they all seem to be about the £70 bracket.

Paul.

I received the odb cable yesterday and loaded few software and its great. I been testing the live data and the great thing is it has ability to read the error codes and clear them. i will be messing around with this all weekend.

Link to comment
Share on other sites

  • 12 years later...
On 9/8/2010 at 12:48 PM, suraj said:

Car: Ford Fiesta

Year 2007 57 Plate MK 6 1.4tdci

I require some help and advice from fellow forum users. Yesterday evening i got inside my car and turn the key once and again twice when the engine and transmission light came on (engine was still off at this point) saying engine malfunction refer to owners manual. Owners manual only told me what i already knew that the light is engine and transmission. I switch for about minute or 2 (removed the key totally) and then that message and light went away. I drove home no light appeared at all.

Then..... Today i drove the car approx quarter of a mile and then engine and tranmission light came on again, i pulled over for 5 minutes switching off the engine and then retried and then message went away and did not appear at all for the duration of my commute (15 miles).

Please can anyone advise me on whether this a common problem or whether it worrying about? Your comments will be mosted welcomed.

 

  • Haha 1
Link to comment
Share on other sites

Well done @LCCRADDO you win January 2023's prize for resurrecting the oldest post. At a full 12 years old I doubt anyone will beat that !!!

Or will they ?

 

  • Haha 1
Link to comment
Share on other sites

Would quoting a post be classed as a one post wonder even?

This record will NEVER be beaten

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership