hi there folks been having some issues myself an thought id see if you guys have any thoughts.
so the switch stopped working, I was doing some work on the rear tail lights at the time so there is a possibility something may have gone a bit wrong but as far as I can tell everything was isolated.
anyhow, the remote unlocks the tail gate work but the switch doesn't. there are two feeds going in to the switch, a neutral and a 12v live (white). the switch is off by default and when pushed in creates continuity so as far as I can tell that switch should be working.
tracing the 12v live (white) back in to the boot it runs off towards the front of the car,
the neutral follows the same path and joins up with a netural from the reg plate lights and tail gate lock, and wiper motor all maintain continuity.
my guess is that white from the switch runs off to some sort of control but at this point im stuck, I cant see any mention of a fuse or a relay in Haynes but with power going to it im a little stumped.
soo does anyone have any ideas?
edit, bugger, just realised im not on the focus sub forum! oops! ah well it should be much the same setup...