Jump to content


Show
Photo

How To Align S Max Lower Arm


  • Please log in to reply
No replies to this topic

#1 JOHN31

JOHN31

    Member

  • New Member
  • PipPip
  • 15 posts
  • Ford Model: S MAX 2.0 TDCI TITANIUM

Posted 03 October 2010 - 11:35 PM

hi

i have an s max 59 reg and i have replaced the sub frame as it was bent in a accident, i think i need to align the lower arms but don't know how to do this, there must be some way of doing this because if you loosen the 2 pinch bolts on the rear of the arm, where the anti roll bar bush is the arm can be moved which moves the caster ? so how do i line it back up again ??

and just a quicky is the anti roll bar the same as a ford focus 02 reg onwards does this have an angle or height it needs to be set at ???

there are no Haynes manual out for this vehicle i wonder why ???

thanks a lot for any help you can give

john

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users