Jump to content


Photo

Hi-Level Brake Light Controller


  • Please log in to reply
No replies to this topic

#1 Martin of Binfield

Martin of Binfield

    Newbie

  • New Member
  • Pip
  • 1 posts
  • Ford Model: S-Max

Posted 08 November 2010 - 07:50 PM

A brake light failure message came up. I've changed the hi-level brake light bulb (after wrestling with the spring clips and then discovering you can remove the bulb carrier without removing the spring clips). However, when I press the brake pedal the new bulb glows for a moment and then goes out. Pressing the brakes again does nothing. If I turn the ignition off and on again, I get the brief glow again the first time I press the brake. With no bulb in, I'm getting 10-11V on the bulb holder whether or not the brake pedal is pressed.

It seems like a solid-state "fuse" is faulty. Can anyone tell me which module this is?

thanks!

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users