Bilz Posted January 9, 2011 Share Posted January 9, 2011 hi i have put some crystal clear side repeadters on my mk1 focus. the drivers side one is fine and is in place properly, but the passenger side is loose, so water is coming in. is there any way i can make it more secure. thanks Quote Link to comment Share on other sites More sharing options...
H3lly Posted January 9, 2011 Share Posted January 9, 2011 Use a thin bead of silicone or just super glue it in place. Quote Link to comment Share on other sites More sharing options...
Bilz Posted January 10, 2011 Author Share Posted January 10, 2011 thanks mate. also if you don mind, how would i replace my passeneger wing mirror, it's held on by tape, but i am going to buy a new one, how would i put this on?? thanks alot!! Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 10, 2011 Share Posted January 10, 2011 Bare in mind that if you superglue this repeater, then you may not be able to remove it to change the bulb when it goes! you are better off using silicone beading, or you can buy a rubber seal for a few pence either from ford, or off the internet. As for the mirror take a look http://www.howtomendit.com/answers.php?id=55002 there and also take a look on youtube, you can find a lot of videos where people have done this themselves and recorded it! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.