Jump to content
Do Not Sell My Personal Information

''secret Hole'' Ideas?


the swan
 Share

Recommended Posts

any ideas for the 'secret' hole? been looking at sat navs, not come across one that folds out into a screen yet, small enough for the hole, looking to maybe make a custom size fitting which slides in and out of the hole?

any ideas? all comments welcome .....

Link to comment
Share on other sites


Secret hole has gone! It used to hinge, but now it clips on! can't hide my satnav in there now!

Link to comment
Share on other sites

  • 2 months later...

Since I discovered the Secret Hole, I haven't found a practical use for it. It's a strange shape and too deep to put small things in there. You risk getting your hand stuck ! My tomtom satnav certainly doesn't fit. I'm intrigued as to what Ford had in mind. The cover is marked 'IP centre lid'. Is the IP some reference to a future networking device ? Or maybe, I thought, are Ford thinking ahead to where to put the decoder when analogue radio is switched off ?

Link to comment
Share on other sites

Since I discovered the Secret Hole, I haven't found a practical use for it. It's a strange shape and too deep to put small things in there. You risk getting your hand stuck ! My TomTom satnav certainly doesn't fit. I'm intrigued as to what Ford had in mind. The cover is marked 'IP centre lid'. Is the IP some reference to a future networking device ? Or maybe, I thought, are Ford thinking ahead to where to put the decoder when analogue radio is switched off ?

Oh, I've yet to discover it :o Tell me more.....

Link to comment
Share on other sites


i use to store my ID in there and my sat nav...

and Search your stereo area londonGirl!

Oh I see...thanks :) I've driven more Fiestas than I care to admit but this is the first I've heard of the 'secret hole'. My latest Fiesta has a Sony radio is it underneath that?

Link to comment
Share on other sites

it should be yeah, however, you've prob got the clip version, whereas alot have the *door style* mechanism. Its quite obviously its the panel thats looks like ford realised they missed a gap

Link to comment
Share on other sites

it should be yeah, however, you've prob got the clip version, whereas alot have the *door style* mechanism. Its quite obviously its the panel thats looks like ford realised they missed a gap

I've been to investigate this mysterious hole and now know what you're talking about. I didn't open it - don't want to break the thing as the car is less than a week old :D

Link to comment
Share on other sites

haha, i know the feeling. The only reason i opened my is i saw a gap and thought hmm, i'll open that with my key...

It closes now, but if i hit a speed bump to quick it opens lol.

Im thinking of making it into something, i.e. sat nav holder but i am no where near a good DIY man. If i was given a hammer and some nails, i can guarantee by the end of the day i'd be stuck to a wall...

Link to comment
Share on other sites

haha, i know the feeling. The only reason i opened my is i saw a gap and thought hmm, i'll open that with my key...

It closes now, but if i hit a speed bump to quick it opens lol.

Im thinking of making it into something, i.e. sat nav holder but i am no where near a good DIY man. If i was given a hammer and some nails, i can guarantee by the end of the day i'd be stuck to a wall...

I shouldn't laugh but that it too funny :lol:

Link to comment
Share on other sites

Mine is hinged but the hinge comes apart too easily leaving the cover dangling ! You lot must have small hands to reach to the bottom of the compartment ! Getting your hand stuck whilst driving would not be funny ! The cover is directly below the central hazard warning light switch, Londongirl8.

Link to comment
Share on other sites

Getting your hand stuck whilst driving would not be funny !

Or maybe it would be ! Mr Bean ? :lol:

Link to comment
Share on other sites

Guys, Look for Bens ZS thread you will see he has attached some clips, il be doing the same soon when i get round to paying more for postage than the clip! but it is quite smart, i wish i could create a mount for my tomom on rails but it is just fitting but very tight so no room to spare!

Could still be useful for something might make like a drawer or something to put little things in there.

Anthony

Link to comment
Share on other sites

I used some magnetic tape for my door, a piece either side on the car part of the hole; a matching piece on each side of the flap ....... the 2 rolls of self-adhesive magnetic strip only cost me £1 from guess where? A pound shop :-) Holds it well, not dropped off yet!

If anyones interested I'll pop a picture up?

Jim

Link to comment
Share on other sites


Mine doesn't fit very well after removing it! I had to do this to access my headunit to fit my subwoofer.

Best way to keep it tightly fitted?

Link to comment
Share on other sites

R-Head's magnetic tape sounds the best idea. I have some push-pull clips ready to fit but can't find the ideal position. Using double sided tape to mount them doesn't work and araldite is a bit too permanent. I was thinking about magnetic catches and the magnetic tape sounds a brilliant idea. Pound shop here I come !

Link to comment
Share on other sites

Here's a pic of the tape. At the moment I'm just trying a big bit on either side, it used to be about 1/2 the size but when I lined the door with some left over carpet/felt I used for the rear of the seats the magnets weren't big enough and the door kept dropping. At the weekend I'll tidy it all up, it's got to look nice, and throw the felt on the door too.

photo.jpg

Link to comment
Share on other sites

Here's a pic of the tape. At the moment I'm just trying a big bit on either side, it used to be about 1/2 the size but when I lined the door with some left over carpet/felt I used for the rear of the seats the magnets weren't big enough and the door kept dropping. At the weekend I'll tidy it all up, it's got to look nice, and throw the felt on the door too.

Looks good. The felt is quite thin, I assume, otherwise I can see the problem with the lid closing. I currently have a '10' registerd Mk 7 (basic 'Edge' I think) as a courtesy car while mine is being repaired and the hinged lid is identical to ours even down to the bits of black sponge stuck on. Someone said they had a version with a clip-on only cover. Would this be a later car I wonder ? Actually I'm still trying to think of a really practical use for the hole.

Link to comment
Share on other sites

  • 4 weeks later...

How is the best way to open it for the 1st time without doing any damage?? Top,middle,bottom,using force??

Link to comment
Share on other sites

Get a screwdriver (or key) cover it in a tissue or cloth, and gently pry it open from the top, the clip is in the top middle, so you need to apply a bit of force either side once you can get the screwdriver in far enough. It'll feel like it's breaking when you're doing it, but don't worry!

Link to comment
Share on other sites

MRC89 is right. Important thing is to use something covered so as not to scratch the cover. Centre top I would go for. I now have the magnetic tape in place and it works fine - brilliant idea - thanks R-head. If you put anything small in the compartment it can be difficult to reach to get out again. I've only got tissues in there at the moment until I can think of a better use.

Link to comment
Share on other sites

I hide my CD's in there and as I record them in MP3 Format, equivalent to 36-40 hrs of music, I can get 4 of the slim cases in the "secret hole".

Mind you I had cut some carpet tile up to line the opening to stop the CD's rattling around.

Link to comment
Share on other sites

Fitted a push to open/push to close on mine. Involved cutting and shutting, as well as sanding down the lid so give me another 1mm - 1.5mm of room. Looks factory when closed.

Fzs%20%283%29.jpg

Fits a tomtom Go 550 perfectly.

Also modified my satnav mount and secured it to the dash by friction (rubberised dash is pretty awesome for 'wedging' stuff into without damage/marks).

I fed the wire where the ambient lighting kit fits and then through the bracket that holds the glovebox closed (removed it, threaded wire, refitted).

Tomtom%20%281%29.jpg

Tomtom%20%282%29.jpg

Saved alot of headaches on the 3000 mile trip we took across Europe, I would have hated to have kept sticking/unsticking from the Windscreen then taking it in the hotels with us.

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership