weedavey1888 Posted April 11, 2011 Share Posted April 11, 2011 hi guys i want to fit a towbar to my fusion 03 plate.been looking around for a suitable towbar.came across one on e-bay. http://www.pct.eu.com/automotive/Fitting%20Instructions/pdf/FD4233.pdf. could you please tell me if all the holes for the brackets are already on the chassis or would i need to drill these my self. BIG THANKS IN ADVANCE :) Quote Link to comment Share on other sites More sharing options...
LoneWolf Posted April 17, 2011 Share Posted April 17, 2011 Hi you shouldnt need to drill any holes. 9/10 the holes are already in the chassia to allow a towbar to be fitted. below is insturctions for fitting the witter towbars to a fusion http://www.witter-towbars.co.uk/uMedia/FittingInstructions/F118.pdf Regards Lonewolf Quote Link to comment Share on other sites More sharing options...
weedavey1888 Posted April 18, 2011 Author Share Posted April 18, 2011 cheers lonewolf many thanks :) Quote Link to comment Share on other sites More sharing options...
kv100 Posted April 27, 2011 Share Posted April 27, 2011 Hi there, I dont know if you are still interested but I fitted a towbar on my fusion yesterday. All the holes were pre-drilled and it took me and my mate about an hour to fit. We found that it was easier to jack up the back end and remove the wheels. It was easy to fit and we had no problems with following the instructions.If you are still interested the towbar in question was one of these. Ebay Towbar For Ford Fusion We also found it very amusing that it comes with parts called "Plates On Rods" Lol. Hope this is of some use to you. Regards, Paul. Quote Link to comment Share on other sites More sharing options...
weedavey1888 Posted May 8, 2011 Author Share Posted May 8, 2011 cheers paul and thanks for your help :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.