mondeo mk3 remote

[mk3ghia]

Hi,I have replaced the battery in my remote today as it was virtually flat,When i have put the new one in it doesnt do a thing. I put the old one in to try it but it would unlock but wouldnt lock,Does it need reprogramming?I have looked on other websites for answers and a lot say that the remote should work fine even after the battery has been flat for a while so have i done something wrong,The positive side of the battery is facing up as it should but im stuck for ideas.

Any replies would be appreciated.

[mintalkin]

it could have lost the programing but dont ask why, look here for reprograming

http://www.mirez.co.uk/KeyProg.htm

[mk3ghia]

it could have lost the programing but dont ask why, look here for reprograming

http://www.mirez.co.uk/KeyProg.htm

Thanks for that,I will try at the weekend and let you know how it goes.

[mk3ghia]

Thanks for that,I will try at the weekend and let you know how it goes.

I took the remote apart again today and had a look at the silver spring clips that hold the battery,they needed adjusting into place slightly as they werent touching the contacts,Its now working as usual.

Thanks for your help in this matter.