Jump to content
Do Not Sell My Personal Information

The Ultimate Reverse Bulb 6000Kelvin (55Watt Equivalent)


Lenny
 Share

Recommended Posts

Just arived, aleady fitted, looks great, will find out tonight if its bright enough :)

Cool post a pic if you can, and let us know what you think.

Link to comment
Share on other sites


Pic:

DSCF7663.jpg

Think its oooofin bright :D Will give you my thughts later once iv tried it out in a carpark ;)

Link to comment
Share on other sites

looks good! , nice and bright , so easy to fit as well!

Thanks, and yeah real easy fit, some car bulbs can be a right pain. Will be nipping out to tesco soon so will see how it is with the privacy windows!

Link to comment
Share on other sites

Tried it out, impressive light from the outside like I said but still not great for reversing in the dark with the privacy glass, its great looking out of the passenger mirror, however cant see much in the drivers mirror as per.

Idealy you need a reverse light either side of the car to give an even spread of light.

Link to comment
Share on other sites


Tried it out, impressive light from the outside like I said but still not great for reversing in the dark with the privacy glass, its great looking out of the passenger mirror, however cant see much in the drivers mirror as per.

Idealy you need a reverse light either side of the car to give an even spread of light.

I have saw this done before,

if you purchase a reverse unit for a left hand drive model of focus,

swap the red unit for the clear one, then

splice in to the reverse cable and run a new line to the fog side,

the new unit will come supplied with a bulb socket so you will have 2 of those and put one on the end of the new reverse light

then take your old fog light unit and cut the fitment part off,

drill a hole on the side of your new unit and glue this section on to it,

once dry fit your reverse bulb in the original solt as it will work better facing directly out the rear of the car

and then fit your standard P21w Red Bulb in the side one.

Job Done http://www.fordownersclub.com/forums/public/style_emoticons/#EMO_DIR#/cool.gif

just need to purchase a lhd reverse light

For the Mk1 and Mk1.5 Click Here For the Mk2 and Mk2.5 Click Here

Link to comment
Share on other sites

Lenny, that was exactly what I was thinking of doing and was going to post a thread up in due time asking advice!

Iv been looking at the LH drive light for a while, just as a cosmetic mod to even out the look of the back of the car.

Hmm..... Anyone done this? Might give it a go ;)

Link to comment
Share on other sites

Lenny, that was exactly what I was thinking of doing and was going to post a thread up in due time asking advice!

Iv been looking at the LH drive light for a while, just as a cosmetic mod to even out the look of the back of the car.

Hmm..... Anyone done this? Might give it a go ;)

:D ive fitted the lhd reverse but not the conversion mate,

id recommend this Pinflair Glue mate it drys clear is is hard as nails Click Here also have great precision with the syringe

also for best results id start a new thread on this one mate

Image0885.jpg

Image0883.jpg

Link to comment
Share on other sites

I've attached a 'how to' guide that I nicked from another ford forum. I had planned doing this myself but never got around to it. I need to source the parts needed. Hope this helps.

Twin reverse lights.pdf

  • Like 1
Link to comment
Share on other sites

I did the conversion on my old focus... its easy!!

Also, the mk2.5 looks harder as there is less space on the back of the lamp housing... i think youd need to cut the lampholder at an angle... I'm looking into this as we speak as i want to do this to my new focus, and will do a guide for everyone once ive found a method that works!

I was helped along for this by my other half... who decided to reverse my new car id had 10 days into a pillar lol!! only damage... the fog light! what a shame, i just had to order the LHD reverse light ;) lol

I dont know why ford didnt do this from standard anyway!! it makes much more sense!

Link to comment
Share on other sites

Twin reverse lights make all the difference, my Cee'd has them and it makes life so much easier, and much brighter. plus the pro of having the reverse lights a little higher up the middle of the car, means I get a good shine, If I could change anything about the focus, it would be the reverse light position!

Link to comment
Share on other sites

  • 1 month later...

Hi Lenny

Will these bulbs fit a 2002 Mondeo?

Have the same problem as the chap who first posted. Can't see a thing behind me in a dark street

Link to comment
Share on other sites

i think they fit most cars?? they have the same fitting as a standard brake/indicater bulb?? best bet would be to find them on eBay and email they supplier??

Link to comment
Share on other sites

Pull your existing bulb out and if it looks like these pictures then all is good - (side pins should be directly opposite each other)

bulb1.jpg

bulb2-1.jpg

Link to comment
Share on other sites

Hi Lenny

Will these bulbs fit a 2002 Mondeo?

Have the same problem as the chap who first posted. Can't see a thing behind me in a dark street

Hi mate,

sorry for the delayed response the cree bulb for the focus is a replacment for a P21w Bulb

also known as BA15s or 382 so if the mondeo is the same fitment then this is the bulb for you,

however if your reverse bulb is different such as a T20 fitment, then cree reverse bulbs are also available in other fitment types by searching on eBay,

so when you find the reverse bulb fitment in your mondeo, enter it in to eBay and put the word ''Cree'' after the fitment and click search,

hope this helps. and thanks to others who have helped you also.

Link to comment
Share on other sites


Hi mate,

sorry for the delayed response the cree bulb for the focus is a replacment for a P21w Bulb

also known as BA15s or 382 so if the mondeo is the same fitment then this is the bulb for you,

however if your reverse bulb is different such as a T20 fitment, then cree reverse bulbs are also available in other fitment types by searching on ebay,

so when you find the reverse bulb fitment in your mondeo, enter it in to ebay and put the word ''Cree'' after the fitment and click search,

hope this helps. and thanks to others who have helped you also.

Thanks Lenny and all who have replied.

I'll pull a bulb out and have a look.

Regards

Simon

Link to comment
Share on other sites

Thanks Lenny and all who have replied.

I'll pull a bulb out and have a look.

Regards

Simon

No problem mate,

please keep us updated, if you fit a Cree bulb,

upload some pictures mate, and let us know what fitment it is too.

Link to comment
Share on other sites

HI all.

Update.

No joy I'm afraid. - Mondeo mk3 reverse light bulb is a small halogen bulb much smaller than the standard break/indicator.

It is a "H21w" r435.

You can get a xenon replacement but I want more light not blue colour, can't seem to find anything made by cree or anything with the performance of the bulbs Lenny has mentioned for the Focus.

Anyway back to the drawing board.

Regards

Simon

Link to comment
Share on other sites

HI all.

Update.

No joy I'm afraid. - Mondeo mk3 reverse light bulb is a small halogen bulb much smaller than the standard break/indicator.

It is a "H21w" r435.

You can get a xenon replacement but I want more light not blue colour, can't seem to find anything made by cree or anything with the performance of the bulbs Lenny has mentioned for the Focus.

Anyway back to the drawing board.

Regards

Simon

Give this guy a try on the Honda Civic forum (www.civinfo.com). He know's everything bulb related !!

http://www.civinfo.com/forum/members/mr+jp.html

Link to comment
Share on other sites

HI all.

Update.

No joy I'm afraid. - Mondeo mk3 reverse light bulb is a small halogen bulb much smaller than the standard break/indicator.

It is a "H21w" r435.

You can get a xenon replacement but I want more light not blue colour, can't seem to find anything made by cree or anything with the performance of the bulbs Lenny has mentioned for the Focus.

Anyway back to the drawing board.

Regards

Simon

Hi mate,

ive found these ones to fit,

they may not be quite as bright as the cree model but they do look to be high quality and they are 6000k white just the same as the Cree Q5

http://www.ebay.co.u...=item3cba2c744b

or these:

http://www.ebay.co.u...=item2ebaeca5ab

http://www.ebay.co.uk/itm/2-BA9S-H6W-12V-4-LED-SMD-Car-Spot-Lamp-Canbus-Audi-/300652320704?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item46004657c0

Hope this helps B)

Link to comment
Share on other sites

Cheers lenny, I could not find anything - have you ever thought of working for the government doing research - your the man!!

Thaks again

Simon

Link to comment
Share on other sites

Cheers lenny, I could not find anything - have you ever thought of working for the government doing research - your the man!!

Thaks again

Simon

Thanks for the confidence vote mate, and glad i could help,

I wont get in to the Irish Government with you mate we have Billy Connolly running this country and its one big Joke!

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...

Forums


News


Membership