Jump to content
Do Not Sell My Personal Information


New Focus - One Touch Windows


oilburner
 Share

Recommended Posts

Does anyone know if the one touch up/down function can be switched on for all windows on a EB Titanium.

All the switches have the 2 click just only works on the driver door

cheers

Steve

Link to comment
Share on other sites


Could be the ECU that needs this switching on, but if it clicks twice, it should set the motor off, dont even think it runs through the ECU though...

Do you actually feel it click twice?

Link to comment
Share on other sites

all four switches click twice but only the driver side works for one touch

Link to comment
Share on other sites

Heard that you have to change the relay behind the door panel that controls the window motor, to the same as the drivers as thats what controls 1 touch so all other doors have to have the same relay..... not looked into it enough myself yet though....

Link to comment
Share on other sites

is there any way of getting a wiring diagram for the car - that should have the answer

Link to comment
Share on other sites


You could find one on google, some people on here have found specific wiring diagrams but not sure I have seen a full car one :(

Link to comment
Share on other sites

Hi, you may have found your answer now but I've just had the same problem on a 2002 Focus after disconnecting the battery..

The windows need to be 're-taught', you need to go round each window in turn and hold the 'up' side of the button (2nd click) until the window is all the way up, then press and hold 'up' again 3 times, for around a second each, repeat for each window. If one-touch down does not work, repeat, but in the 'down' direction

Hope this helps

Link to comment
Share on other sites

Hi, it isn't quite the same process to program the windows on the 2011 Focus as the previous models:

1. Lift and hold the switch until the

window is fully closed.

2. Release the switch.

3. Lift the switch again for one more

second.

4. Push and hold the switch until the

window is fully open.

5. Release the switch.

6. Lift and hold the switch until the

window is fully closed.

7. Open the window and try to close it

automatically.

8. Reset and repeat procedure if the

window does not close automatically.

Chris

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Chris

just picked up your reply up.

all windows now programed and work on one touch and global open/close

many thanks much appreciated

Link to comment
Share on other sites

Chris

just picked up your reply up.

all windows now programed and work on one touch and global open/close

many thanks much appreciated

Can anyone check this with engine running vs switched off. Just programmed mine as previously one touch worked with engine switched off but didn't work with engine running (had to hold switches).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership