Feeding Caling Through Bulkhead - Mk5

[Danny87]

Hi all, I need to feed some cable through the bulkhead on my MK5 Zetec 1.25 5-door. Decided for my DRLs I'm gonna use a switch inside so I can turn them on and off, in the future I will be buying a control box thingy though off eBay so they automatically come on and go off when I turn my sidelights on.

Anyhow, where can I locate a grommet so I can push the wires through the bulkhead into the passenger compartment? My Fiesta is fly-by-wire so I was thinking there might be a grommet where the throttle cable would have came through?

Hope someone can help, I couldn't find any information either through a Google search or a search on this forum.

Thanks :D

[marcomk6]

if i remember correctly when i had a mk5 (before an accident) i managed to run some wires through a big rubber bung on the passenger side near the windscreen just cut a slit in it and post the wire through :)

[Danny87]

That's great thanks mate :D.

I'll have a look when it's not raining and hopefully be able to get it done nice and quickly lol.

Dan

[marcomk6]

yea tis not to far from the batt i think. Its big enough to get a large sound system power cable through so all should be well for you :D