Jump to content


Photo

Ford KA Fuse Blows when AC is ON


  • Please log in to reply
1 reply to this topic

#1 induscreed

induscreed

    Newbie

  • New Member
  • Pip
  • 1 posts
  • Ford Model: Ford KA 2001
  • Location:

Posted 29 December 2008 - 02:00 AM

I have a Ford KA 2001 and I have a problem where the 10 Amp Fuse (number 17) keeps on blowing when Aircon is ON resulting in Dead Instrument Panel and no Ignition. Replacing the Fuse and Turning OFF the Aircon works fine with no further problem. I have replaced the 10 Amp fuse with a 25 Amp fuse and that didnít work as well.
Please help as to what might be the reason?

Thanks in Advance for the information.

Indus

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 DanGull

DanGull

    Area Rep: Midlands (Despite owning a Seat)

  • FOC Supporters
  • 2,229 posts
  • Ford Model: Formerly a Mk7 Fiesta Titanium 1.6 TiVCT now a Seat Leon FR+ 2.0TDI 170
  • Year: 2014
  • Location:
Contributor

Posted 22 December 2009 - 09:38 AM

This was sent via the report button by a new member 'Zac' whose account is yet to be validated by the management...

Had the same problem.
Itís the engine mounts in practically the left hand side.
If the mount are completely worn the engine under torque will move causing stress for A/C piping or electrical. After replacing the mount the A/C been fine.


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users