Fieta 51 plate butler Posted September 7, 2011 Share Posted September 7, 2011 Hi All I had a service on my ford fiesta 1.3 mk5 facelift (engine endura) servive on my car, oil,filters,flush, and noisey tappets ajustment - Now the noise as gone on the tappets , their seens to be a bigger problem , it stalls all the time , traffic lights, when i idle, etc them after 10 to 15 miles my engine light came on in the, the know now 1. STALLS ON HILLS AND STRIGHTS ILDEING, NOT IN GEAR TOO, 2.DOESNT SEEN TO STALL DOWNHILLS AT ALL, 3.STARTS OK AND CAN TICK OVER TOO, BUT SHAKES LIKE IT WANTS TO SHUTDOWN If any of you can help me please do... as its frying my head to bits What are the common cause of this???? Thank you Quote Link to comment Share on other sites More sharing options...
Fieta 51 plate butler Posted September 7, 2011 Author Share Posted September 7, 2011 thats the engine light on the dash Quote Link to comment Share on other sites More sharing options...
fiesta_lad Posted September 7, 2011 Share Posted September 7, 2011 Hello again just to add if the tappets are out of ajustment then this means the valves aren't closeing which means that you won't be getting the right compression or the right fuel mixture in to the cylinder this could be why your car is like you said stailing and shakes i would go back to were ever you got it done and have a word with them. Quote Link to comment Share on other sites More sharing options...
Fieta 51 plate butler Posted September 8, 2011 Author Share Posted September 8, 2011 Thanks I will Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.