fiesta_lad Posted September 26, 2011 Share Posted September 26, 2011 Hi i use my trolley jack for the first time today put it to it's test. So i jacked up on the chassis which what i think is the long bit of metal that runs along centre under the car. But the thing is the saddle on the jack had abit of a claw. And it has left abit of a print on the chassis and dinted it abit not really bad like. So i am wondering will this cause any problems see pics below. This is what i jacked it up on has i thought it was solid and safe. And this is what the saddle on the jack has done. Do u think this would be ok for the car cheer alan Quote Link to comment Share on other sites More sharing options...
Danny87 Posted September 26, 2011 Share Posted September 26, 2011 I think you'll be okay mate tbh, my Fiesta had the same thing when I bought it but it was in the corner near the jacking point. It looked the same as this and all it did really was peel back a bit of the waxoyl and there was no other damage so not too worried. Only time to be worried is if the jack slips off and hits the floorpan (I knew someone this happened to) and it forced the floorpan up about 6 inches! There's a reason I'm always worried about jacking up my car lol :D Quote Link to comment Share on other sites More sharing options...
stef123 Posted September 26, 2011 Share Posted September 26, 2011 If im using a jack with a claw type saddle i normally use a piece of wood to stop it marking Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.