• Join Premium & Save
      Join Premium & Save
    • Savings Up to 15% Off For Members
      Savings Up to 15% Off For Members
    • 1000's Of Fords For Sale
      1000's Of Fords For Sale
    • Get Your Club gear
      Get Your Club gear
    • Huge Range of Ford Parts
      Huge Range of Ford Parts
    • Share Your Car Experience
      Share Your Car Experience


mikester

Retro-Fit Usb........ It Works!!

161 posts in this topic

You will need a new BT module the USB leads and the USB port that's located next to your aux input if you want it to look factory fit

Share this post


Link to post
Share on other sites
 

Thank you. Do you have any idea of the part numbers so I can track these parts down?

Share this post


Link to post
Share on other sites

Thank you. Do you have any idea of the part numbers so I can track these parts down?

Read the whole thread mate, usually helps =P

Page 1 & 5 I believe is what your after.

iNath outlines the Finis numbers on page 1 and the correct module you need on page 5.

Share this post


Link to post
Share on other sites

Hi

There are modules appearing with serials that are like the following:

CS7T-14D212-AC

Can anyone shed any information as to whether it would be suitable?

Share this post


Link to post
Share on other sites

Hey all,

I bought these to fit to my Fiesta but its a 2009 and the loom is different.. epic fail but there you go.

I would recommend these parts to anyone with a 2010 Fiesta onwards.

Selling these bits as follows.

Ford Bluetooth USB Voice Module 8M5T-19C112-AP - £95 posted

Fiesta Mk7 2010 USB Loom - £50 posted

USB Port - £6 posted (The one in the first image is the wrong one, replaced with correct part in second image)

USB/AUX Facia - £4 posted

All together £150 posted (I would rather sell as a set, it will also be useful for someone and save them time)

These are all new apart from the module.

Thanks thumbsup.gif

IMG_0874_zpscc86f246.jpg

IMG_0903_zpseafa1f48.jpg

IMG_0904_zps9563874c.jpg

Share this post


Link to post
Share on other sites

You have a PM FROST13

Galaxis

Share this post


Link to post
Share on other sites

Ok so,

Mr.Galaxis has bought my module, I still have the following -

Fiesta Mk7 2010 USB Loom - £50 posted to UK

USB Port - £6 posted to UK (The one in the first image is the wrong one, replaced with correct part in second image)

USB/AUX Facia - £4 posted to UK

Cheers, ^_^

Galaxis likes this

Share this post


Link to post
Share on other sites

And Galaxis is happy :)

Thx to mr.Frost13 :)))

Share this post


Link to post
Share on other sites

USB/AUX Facia - £4 posted to UK

Cheers, ^_^

Me please!

Share this post


Link to post
Share on other sites

Their cheap from fords too :)

PANEL - CONSOLE (INTERIOR ENVIRONMENT COLOUR-FLORIDA, WITH A/V JACK AND USB) 1572825 @ £5.36 :)

Share this post


Link to post
Share on other sites

Their cheap from fords too :)

PANEL - CONSOLE (INTERIOR ENVIRONMENT COLOUR-FLORIDA, WITH A/V JACK AND USB) 1572825 @ £5.36 :)

Ordered it 8 weeks ago and never came in :(

Share this post


Link to post
Share on other sites

Update on parts left -

Fiesta Mk7 2010 USB Loom - £50 posted to UK

USB Port - £6 posted to UK (The one in the first image is the wrong one, replaced with correct part in second image)

Cheers,

Share this post


Link to post
Share on other sites

Not sure if anyone still watching this thread

I've fitted the Sony headunit as first step in this upgrade. Purchased correct BT USB unit

Still to get correct wires and USB connection plate

Looking back at one of the previous posts ( I think from Lez) it shows the screen after the IDS work done with an orange/ red backlight.

My original (lower spec) head unit had orange lighting and orange baklit screen also, the Sony headunit and the screen I've fitted have a white/ ice blue tiny lighting.

On previous Sony CD headunits I've fitted on older cars I've had, they had the option of changing the colour of the lighting both on the unit buttons and on screen.

Does anyone know if this is the case with the Sony headunit for the fiesta?

It is just with the lighting in the fiesta IMHO the red/ orange backlighting would tie in better with the existing lighting already fitted

Thanks in advance

Share this post


Link to post
Share on other sites

Only way to change colour is to replace screen with a red one.

Share this post


Link to post
Share on other sites

Cheers iNath,

Hmm not sure ill bother then as the buttons on the Sony unit would still glow white

I'm not sure how well it would work but if someone did fancy changing the colour of the screen a cheap option would be to remove the plastic sheet (LCD screen protector) from the screen unit and lightly spray the inside face with glass paint.

Off topic, I've done this on fluorescent strips for fish tanks in the past.

Seriously though I would only try this if u are very confident or have a spare that can be spared.

Share this post


Link to post
Share on other sites

Same topic, just, but different part

I know some on here have changed the secret compartment to a drop down door, on the hinged version of the compartment cover.

My fiesta has the newer all clipped cover.

2 questions;

1) does anyone know if the cover can be swapped to the version with the hinge without also changing the heater matrix facia cover/ surround?

2) does anyone know/ can u see on the reverse of one that's been converted to drop down, the part number, because fordparts can't identify it from my part number and look for an older version of same part, so have asked for the part number.

Thanks again guys 😀

Share this post


Link to post
Share on other sites

what part number did you give to your dealer ?

Share this post


Link to post
Share on other sites

FROST

are these parts universal in which modukes they connect to?

Fiesta Mk7 2010 USB Loom - £50 posted to UK

USB Port - £6 posted to UK (The one in the first image is the wrong one, replaced with correct part in second image)

Share this post


Link to post
Share on other sites

Tezza

My request to fordparts was

"The part I was looking for was an older version of;

8A61-A045N56 AFW

Bezel-IP-CENTER STACK UPPER"

And I explained that the one I have has clips where older one has a hinge onton the heater matrix facia cover

No joy though unless I can quote part number for older hinged version

Share this post


Link to post
Share on other sites

You can't swap the clipped version for hinged one as you don't have the hinges for it to hook on to, and they're part of the dash behind the cover.

There are 2 USB looms so it depends which model module you have.

Share this post


Link to post
Share on other sites

FROST

are these parts universal in which modukes they connect to?

Fiesta Mk7 2010 USB Loom - £50 posted to UK

USB Port - £6 posted to UK (The one in the first image is the wrong one, replaced with correct part in second image)

Hey mate,

It will fit the following modules as listed by iNath.

85MT-19C112-AR / AS / AT

These as far as I'm aware are the newer Mini-USB connection modules.

The lead I have will fit them - the other part numbers listed earlier in this thread by iNath are what I used and will be what your looking for if your looking to add it to a 2010 model Fiesta and onwards.

I have a 2009 model Fiesta, hence why I'm selling the bits - you need the USB connector as it clips to the facia where your singular AUX port is (You will need the AUX & USB Facia)

Cheers dude,

bluetoothmodules.png

Share this post


Link to post
Share on other sites

I have bought (although still waiting delivery)

Module 8M5T-19C112-AT

So that looks like it should work

Fiesta is 2011 so all should be ok from instructions we have on here??

If that's case tell me how to pay you and ill have both.

I guess then only the facia plate for USB and aux to get 😀😀🙏🙏

Share this post


Link to post
Share on other sites

Yeah should be this part number - 1572824

Cheers dude,

Share this post


Link to post
Share on other sites

Frost, how do u want me to arrange to pay you for the module loom and the USB connection wiring?

Let me know and ill get payment to you ASAP 😀

Share this post


Link to post
Share on other sites

The wiring for the module are as follows

1580659 03/11/2008 to 11/07/2009 1580659 @ £128.99

1678395 07/11/2009 to 21/06/2010 @ £68.36

1755525 31/01/2011 onwards @ £49.04

USB port 1715190 @ £6.00

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now