Jump to content


Show
Photo

Ford Focus Rear Badge Brake Light


  • Please log in to reply
50 replies to this topic

#1 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,829 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 26 November 2011 - 08:03 PM

Hi all,

ive gone and mangled my rear ford badge trying to remove it,

i need a replacment one, thought it would be an easy task but theirs so many different sizes on e-bay, and i cant measure my own as its twisted up :rolleyes:

anyone with a 5door focus facelift please help


Posted Image

Posted Image

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 Pitmonster

Pitmonster

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 350 posts
  • Name: Dave
  • Ford Model: 2006 Mk2 Focus 1.8 TDCi Zetec (Climate)
  • Year: 2006
  • Location: Lancashire

Posted 26 November 2011 - 08:26 PM

Mine is 145mm wide, 56mm high
But please note that my Mk2 Focus is a pre-facelift model.

#3 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,829 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 26 November 2011 - 08:33 PM

Mine is 145mm wide, 56mm high
But please note that my Mk2 Focus is a pre-facelift model.



thanks for the quick reply mate,
i think it may be 145mm wide and 60mm high on my original which is much the same as yours,
close enough to your spec mate

thanks for measuring it for me B)

#4 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,098 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 26 November 2011 - 08:56 PM

Lenny , lmao put it on Ebay , Yes i think 145mm is about right as i remember

#5 PaulB1803

PaulB1803

    Settling In Well

  • New Member
  • PipPipPip
  • 85 posts
  • Name: paul
  • Ford Model: Focus Titanium
  • Year: 2008
  • Location: Derbyshire

Posted 26 November 2011 - 09:00 PM

Blimey mate, mangled is an understatement!!

Looks like you have a measurement now so at least I don't need to brave the wind and rain outside lol.
my rear badge has some white glue stuff around the edges and I was considering removing it to clean it up, or replace it but you've put me off now lol.

#6 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,098 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 26 November 2011 - 09:06 PM

Blimey mate, mangled is an understatement!!

Looks like you have a measurement now so at least I don't need to brave the wind and rain outside lol.
my rear badge has some white glue stuff around the edges and I was considering removing it to clean it up, or replace it but you've put me off now lol.


Paul they don't remove easily , double sided taped , thats ford try to make sure won't come apart lol.
but if you insist. Lenny go to Paul's house and remove that badge B)

#7 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,829 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 26 November 2011 - 09:10 PM

Lenny , lmao put it on Ebay , Yes i think 145mm is about right as i remember


lol Yeah can you imagine it:

Used

Ford Badge May fit Mondeo or Fiesta

Lmao :lol:

#8 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,829 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 26 November 2011 - 09:12 PM

Blimey mate, mangled is an understatement!!

Looks like you have a measurement now so at least I don't need to brave the wind and rain outside lol.
my rear badge has some white glue stuff around the edges and I was considering removing it to clean it up, or replace it but you've put me off now lol.


try removing the white with petrol mate,

get an old sock and wipe, could be just was residue as the bonding for the badge is black

#9 PaulB1803

PaulB1803

    Settling In Well

  • New Member
  • PipPipPip
  • 85 posts
  • Name: paul
  • Ford Model: Focus Titanium
  • Year: 2008
  • Location: Derbyshire

Posted 26 November 2011 - 09:14 PM

Paul they don't remove easily , double sided taped , thats ford try to make sure won't come apart lol.
but if you insist. Lenny go to Paul's house and remove that badge B)


Plus mine seems to have been glued too. Ill just put up with it. Note to self, never give Lenny my address. ;)

#10 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,829 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 26 November 2011 - 09:24 PM

Plus mine seems to have been glued too. Ill just put up with it. Note to self, never give Lenny my address. ;)



:ph34r: Damn
ill just go put the Balaclava back in the hotpress ;)

Pree managed to remove his no problem and if you have a dentist drill like he does, you wont have a problem removing it,


but the rest of the pictures of what i done to the panel once i removed the badge,

wow they are way to explict to show on a ford forum,

such buthery :unsure: ford would remove my focus from me, due to cruelty lol i tried to use a regular drill with an 8mm bit, like it was a dremil.... didnt go as planed

but 5 hours later the end result was great, :D

plan to fit the led panel in red to under the badge, then fit the badge on top

#11 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,098 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 26 November 2011 - 09:27 PM

:ph34r: Damn
ill just go put the Balaclava back in the hotpress ;)

Pree managed to remove his no problem and if you have a dentist drill like he does, you wont have a problem removing it,


but the rest of the pictures of what i done to the panel once i removed the badge,

wow they are way to explict to show on a ford forum,

such buthery :unsure: ford would remove my focus from me, due to cruelty lol i tried to use a regular drill with an 8mm bit, like it was a dremil.... didnt go as planed

but 5 hours later the end result was great, :D

plan to fit the led panel in red to under the badge, then fit the badge on top


i have seen the pictures , remember " Chainsaw Massacre" ? poor Focus :blink:

#12 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,829 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 26 November 2011 - 09:30 PM

i have seen the pictures , remember " Chainsaw Massacure" ? poor Focus :blink:


:lol: Yeah poor pree,

He's Scared for life now,

gets a cold shiver every few minutes and flashbacks :lol:

#13 PaulB1803

PaulB1803

    Settling In Well

  • New Member
  • PipPipPip
  • 85 posts
  • Name: paul
  • Ford Model: Focus Titanium
  • Year: 2008
  • Location: Derbyshire

Posted 26 November 2011 - 09:33 PM

Come on then, share..... ;)

#14 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,829 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 26 November 2011 - 09:40 PM

Come on then, share..... ;)


ok heres the end results first.

nice smooth surface:


Posted Image


Posted Image

#15 Lenny

Lenny

    Retired Moderator

  • FOC Supporters
  • 8,829 posts
  • Name: Leonard
  • Ford Model: Focus ZetecS
  • Year: 2010
  • Location: Ireland
Contributor

Posted 26 November 2011 - 09:42 PM

Posted Image



Posted Image


Posted Image





But to get to that their was THIS!!

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users