Jump to content


Photo

Ford Focus 1.6 Tdci Estate 55 Plate - Help Needed


  • Please log in to reply
3 replies to this topic

#1 Paul_g

Paul_g

    Newbie

  • New Member
  • Pip
  • 1 posts
  • Name: paul
  • Ford Model: forcus
  • Year: 2005
  • Location: Yorkshire

Posted 18 December 2011 - 12:31 PM

HI I HAVE A FOCUS ESTATE TDCI ON A 55 PLATE. THE ENGINE MANAGEMENT LIGHT IS ON AND IT SEEMS VERY SLUGGISH. ALSO I THINK I NEED A NEW CLUTCH - ANY IDEA HOW MUCH IT WILL COST - FITTED. ANY IDEA WHAT COULD BE THE PROBLEM WITH THE SLUGGISH PROBLEM TOO THANKS

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 young fez

young fez

    Settling In Well

  • New Member
  • PipPipPip
  • 32 posts
  • Name: andrew
  • Ford Model: ford focus 1.6tdci
  • Year: 2006
  • Location: Yorkshire

Posted 18 December 2011 - 12:37 PM

hi mate eml could be on if you have dpf fitted,clutch would cost between 300-400 depending who does it,i got quoted 350 for mine doing.

#3 TDCiST

TDCiST

    No Smoke No Poke... Unless you have a DPF!

  • Moderator
  • 1,682 posts
  • Name: Dave
  • Ford Model: Ford Focus Zetec S 1.6 TDCi
  • Year: 2010
  • Location: Hertfordshire
Contributor

Posted 18 December 2011 - 03:07 PM

EML can mean anything!! only way to find out is to plug it into a diagnostic machine!

#4 jeebowhite

jeebowhite

    Resident Loon

  • Super Mod
  • 21,154 posts
  • Name: James
  • Ford Model: Sea Grey Mondeo MKIV 1.8TDCi 140ps Zetec
  • Year: 2007
  • Location: Kent
Contributor

Posted 19 December 2011 - 11:06 AM

Daignostics at around 60 + VAT, the sluggish can be anything small, sensor / MAF / Fuel Filter / New Plugs / Decent Service etc etc, so you would need to either 1) purchase an OBDII reader to look at it yourself or 2) take it to the dealer.

As said above, you will be looking at 400ish for a new fitted clutch, if you choose to go to the dealer, you could be looking at 600 worst case scenario.


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users