Jump to content


Photo

Help! Connection Problem With Blaupunkt Nx Sat Nav


  • Please log in to reply
4 replies to this topic

#1 TitaniumX

TitaniumX

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Name: Jason
  • Ford Model: Mondeo Titanium X
  • Year: 1998
  • Location: Buckinghamshire

Posted 05 January 2012 - 03:38 PM

Need help with checking the connections on my Blaupunkt NX head unit. I had the car (2008 Mondeo Titanium X) valeted and I think they were a bit too handy with the hoover when cleaning the passenger footwell; the head unit is now dead. I've had a look under the glove box (see attached image) and I think a connection may have come out but I'm struggling to see which. Anyone know how to check the right connections? Cheers!

Attached Thumbnails

  • photo.JPG


Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,374 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3.5 | Fiesta Zetec Mk7
  • Year: 2015
  • Location: Shropshire
Contributor

Posted 05 January 2012 - 03:56 PM

Safe bet is to check the fuse's and un-plug and then re-plug in the wire connections , Your going to need a radio code.




#3 TitaniumX

TitaniumX

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Name: Jason
  • Ford Model: Mondeo Titanium X
  • Year: 1998
  • Location: Buckinghamshire

Posted 05 January 2012 - 05:00 PM

Safe bet is to check the fuse's and un-plug and then re-plug in the wire connections , Your going to need a radio code.

Thanks for that Paul. I do have the radio code. I was hoping someone might have a diagram so that I could see how many connectors to plug/unplug and how, in case there were some I couldn't see. I am also presuming this unit (including all fuses) is just for the Blaupunkt head unit so that I don't inadvertently break something else in the car. Cheers.

#4 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,374 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3.5 | Fiesta Zetec Mk7
  • Year: 2015
  • Location: Shropshire
Contributor

Posted 05 January 2012 - 05:17 PM

Not sure which ones you will be unplugging , if your worried disconnect the battery first then un-plug at will , i've got a focus so i can't really guide you on the layout of the Mondeo fuse box wiring , but it does sound like they have dislodged something. Or coursed a fuse to blow

The stereo wiring will be similar across the range and not specific to the NX unit as the units are interechangeable , but there will be extra cable for your Climate i would imagine.

#5 TitaniumX

TitaniumX

    Newbie

  • New Member
  • Pip
  • 3 posts
  • Name: Jason
  • Ford Model: Mondeo Titanium X
  • Year: 1998
  • Location: Buckinghamshire

Posted 10 January 2012 - 04:28 PM

OK, so I've checked all the connections in the fuse board and located the fuse for the unit (F6) and that is fine. Still no working head unit.
Any more suggestions as to what could have happened. I've heard that water can get in via the ariel when the car is being cleaned.. what does that break that would lead to a dead head unit?


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users