Jump to content


Photo

Guide For Focus Mk2/mk2.5 C-Max/kuga ~Elm 327 Cable And Ff2 Program

translating

  • Please log in to reply
1991 replies to this topic

#271 Teabags

Teabags

    Settling In Well

  • New Member
  • PipPipPip
  • 50 posts
  • Name: DB
  • Ford Model: Focus ST
  • Year: 2009
  • Location: Essex

Posted 05 May 2012 - 02:10 PM

I connect it all up done the soldering and I've got a problem it reads the voltage and I did on one occasion get up engine info which was to big to fit in the box but nothing else.

When I click read vin I get message

Incorrect response from ELM to request "09 02" CAN ERROR

Have something to contribute?

Sign in or register to start a topic...

#272 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,059 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 05 May 2012 - 02:12 PM

I connect it all up done the soldering and I've got a problem it reads the voltage and I did on one occasion get up engine info which was to big to fit in the box but nothing else.

When I click read vin I get message

Incorrect response from ELM to request "09 02" CAN ERROR

Did you try the switch in both positions?

#273 Teabags

Teabags

    Settling In Well

  • New Member
  • PipPipPip
  • 50 posts
  • Name: DB
  • Ford Model: Focus ST
  • Year: 2009
  • Location: Essex

Posted 05 May 2012 - 02:18 PM

Yes, tried in both positions.

Could it be I've wired it up wrong?


#274 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,059 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 05 May 2012 - 02:20 PM

Yes, tried in both positions.

Could it be I've wired it up wrong?


possibly take it back apart and double check the wiring , did you solder it yourself or someone do it for you

#275 Teabags

Teabags

    Settling In Well

  • New Member
  • PipPipPip
  • 50 posts
  • Name: DB
  • Ford Model: Focus ST
  • Year: 2009
  • Location: Essex

Posted 05 May 2012 - 02:21 PM

I did the soldering


#276 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,059 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 05 May 2012 - 02:24 PM

Double check with the wring diagram from page 15

Since you soldered it , does either side of the switch connect?

#277 Teabags

Teabags

    Settling In Well

  • New Member
  • PipPipPip
  • 50 posts
  • Name: DB
  • Ford Model: Focus ST
  • Year: 2009
  • Location: Essex

Posted 05 May 2012 - 02:34 PM

Can someone check if the desoldered wire from no 6 is the forth wire from the right on the connector?

Can you also check is desoldered wire 14 is the third wire from the right?

#278 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,059 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 05 May 2012 - 02:40 PM

Teabag they are numbered if you look closely
Wires 3 and 11 are third from left

Wires 6 and 14 are third from the left

Thats if you look at the front of the socket with 1 being lop left and 16 being bottm right

#279 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,059 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 05 May 2012 - 02:44 PM

Teabag they are numbered if you look closely
Wires 3 and 11 are third pins top and bottom looking right

Wires 6 and 14 are third from top and bottom looking right handside to left

Thats if you look at the front of the socket with 1 being lop left and 16 being bottm right

Did you also connect to the Laptop and issue either the PuTTy commands as per page one or use the Buttom right on ELMconfig to send the commands to the ELM327

#280 Teabags

Teabags

    Settling In Well

  • New Member
  • PipPipPip
  • 50 posts
  • Name: DB
  • Ford Model: Focus ST
  • Year: 2009
  • Location: Essex

Posted 05 May 2012 - 02:46 PM

I use the button on the Elmconfig.

I actually referring the to white connect on the bored not the serial port connector.

#281 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,059 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 05 May 2012 - 02:50 PM

I use the button on the Elmconfig.

I actually referring the to white connect on the bored not the serial port connector.


I can't check as i super glued my sticker back on the top :)

#282 Teabags

Teabags

    Settling In Well

  • New Member
  • PipPipPip
  • 50 posts
  • Name: DB
  • Ford Model: Focus ST
  • Year: 2009
  • Location: Essex

Posted 05 May 2012 - 03:01 PM

Wiring looks fine after further checks.

I'm at a loss?


#283 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,059 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 05 May 2012 - 03:07 PM

So when the switch is back into standard mode HS-Can , Ignition On you can connect to HS-Can ..... Yes?

When you place the switch in postion 2 MS-Can with ignition ON , you get the error?..



If this is the case i would Download PuTTy and make sure the commands have been entered into the ELM by doing them manually

#284 Teabags

Teabags

    Settling In Well

  • New Member
  • PipPipPip
  • 50 posts
  • Name: DB
  • Ford Model: Focus ST
  • Year: 2009
  • Location: Essex

Posted 05 May 2012 - 04:15 PM

After more testing only thing that works is the volts reading!

Nothing else works tried putty that doesn't seem to be working either!



#285 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,059 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 05 May 2012 - 04:26 PM

Teabag was the ELM working before you modified it?

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



6 user(s) are reading this topic

0 members, 6 guests, 0 anonymous users