Jump to content


Show
Photo

Guide For Focus Mk2/mk2.5 C-Max/kuga ~Elm 327 Cable And Ff2 Program

translating

  • Please log in to reply
2111 replies to this topic

#106 djbaba

djbaba

    Settling In Well

  • New Member
  • PipPipPip
  • 32 posts
  • Name: ali
  • Ford Model: 1.8 tdci sport s 2007
  • Year: 2007
  • Location: Tyne and Wear

Posted 29 March 2012 - 09:21 PM

nice job mate,
i have them translated here on papper, your saving me alot of typing ;)
and i can confirm all of the above matches what my russina work mate has written for me on the screen shots i showed him today.


YOUR WELCOME LENNY ND YOU CAN USE THE SCREEN SHOTS IF YOU LIKE. I HAVE GIVING UP TONIGHT ON TRANSLATING LOL CANT BE BOTHERED :D

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#107 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,099 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 29 March 2012 - 09:22 PM

Here's another page
Posted Image

#108 Pidu

Pidu

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 266 posts
  • Name: Peter
  • Ford Model: Focus Titanium 2.0 AT
  • Year: 2006
  • Location: Devon
Contributor

Posted 30 March 2012 - 01:04 PM

Finally got ELM interface. Not many things for me there, activated instant fuel consumption display and will turn off auto rear wiper. Unfo no success with Putty, only first code was accepted, possibly because my ELM is not rewired yet. Will check it out later.

#109 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,099 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 30 March 2012 - 02:50 PM

Finally got ELM interface. Not many things for me there, activated instant fuel consumption display and will turn off auto rear wiper. Unfo no success with Putty, only first code was accepted, possibly because my ELM is not rewired yet. Will check it out later.


Peter keep trying , as the wiring will make no difference with PuTTy , there's a post further back i think page 5 on how to set it up so you can see the log and commands go through , all the switch and wiring does is move connections via a on/off/on switch so it will still accept the commands even if not wored yet

#110 Pidu

Pidu

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 266 posts
  • Name: Peter
  • Ford Model: Focus Titanium 2.0 AT
  • Year: 2006
  • Location: Devon
Contributor

Posted 30 March 2012 - 03:36 PM

Thanks for tips Preee. Have already read it but did not have more time to deal with it.

#111 DaveRushton

DaveRushton

    Settling In Well

  • New Member
  • PipPipPip
  • 96 posts
  • Name: David
  • Ford Model: Focus Titanium TDCi
  • Year: 2008
  • Location: Worcestershire

Posted 30 March 2012 - 05:10 PM

I use Putty everyday at work....I hate it......Now you are making me use it at home also!! Im going to see what can be added, then ill but the adapter thing :D Brilliant work guys..

#112 Haz93

Haz93

    Serial Poster

  • Budding Enthusiast
  • PipPipPipPip
  • 451 posts
  • Name: Harrison
  • Ford Model: KA Mk2 + Audi A5 Cabriolet
  • Year: 2009
  • Location: Warwickshire
Contributor

Posted 30 March 2012 - 07:35 PM

Hi guys,

Great work with this so far, going to get my self a cable ordered asap :)

I'm in the process of retrofitting the Bi Xenon headlights, thread in focus section. Just wondering if anyone has them already, and if they can be activated via this program.

#113 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,099 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 30 March 2012 - 08:24 PM

I guess there is a good change they may be able to be activated , i read that thread and there seems alot of parts besides the lights to get them to work correctly.

i have my Wife who usually tells me whats around the corner as she thinks ! she is the best driver lol

#114 whisky

whisky

    Settling In Well

  • FOC Supporters
  • 30 posts
  • Ford Model: Fiesta 1.6TDCI & Focus 1.6TDCI

Posted 31 March 2012 - 06:12 AM

Hi All,

Does anybody know yet if there is an option to allow a forced re-gen of the DPF.
this would be really good as ford charge pounds for this.
better still if there's an option not to see it at all.

#115 Stoney871

Stoney871

    Resident Peacekeeper

  • Super Mod
  • 14,773 posts
  • Name: Clive
  • Ford Model: Focus mk2 1.8 TDCI Sport
  • Year: 2007
  • Location: Devon
Contributor

Posted 31 March 2012 - 06:32 AM

i have my Wife who usually tells me whats around the corner as she thinks ! she is the best driver lol


Strangely enough when my wife is in the car she's always yelping and pressing the imaginary brake pedal. :angry:
It gets really annoying for many reasons, mostly because-
a/ I'm a qualified advanced Police driver with a long held clean licence, and-
b/ She doesn't drive and never intends to. <_<

If i ever took her on a full bore blue light run she would die of shock. :D

#116 civil-zz

civil-zz

    Member

  • New Member
  • PipPip
  • 17 posts
  • Name: Sergey
  • Ford Model: FFII
  • Year: 2009
  • Location: Other / Non-UK

Posted 31 March 2012 - 08:54 AM

Some good news.. I complete translation ELMConfig, actual version 0.1.1.7, it's available here: http://civil.iffc.ru...g/ELMConfig.zip
Also i added some new features - work with PAM, RCM, Door units, writing VIN in AHCM and HCM, fix some bugs.. And of course, english language now available. :D

#117 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,099 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 31 March 2012 - 09:20 AM

Some good news.. I complete translation ELMConfig, actual version 0.1.1.7, it's available here: http://civil.iffc.ru...g/ELMConfig.zip
Also i added some new features - work with PAM, RCM, Door units, writing VIN in AHCM and HCM, fix some bugs.. And of course, english language now available. :D


civil-zz :wub: , Thank you so much , you are a very clever guy and thank you for tanslating it for us.
Did you ever write a guide on some of the options available?

Shift change light activates , but it does not indicate as it should with high Revs , is there some other part that needs to be turned on for it to function ?

Again thank you for updating this for us. :D

#118 Pidu

Pidu

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 266 posts
  • Name: Peter
  • Ford Model: Focus Titanium 2.0 AT
  • Year: 2006
  • Location: Devon
Contributor

Posted 31 March 2012 - 10:02 AM

Thank you very much Sergey :)

#119 Preee

Preee

    Ford Fruitcake

  • Moderator
  • 4,099 posts
  • Name: Paul
  • Ford Model: Focus Tit X Mk3 | Fiesta Zetec Mk7
  • Year: 2012
  • Location: Shropshire
Contributor

Posted 31 March 2012 - 01:45 PM

I have tested and works perfect , thank you Sergey.

opened each page i could in switch position 1 read and saved all configurations and also switch in position 2 done the same so i have backed up all on my AS-BUILT.

:)

#120 civil-zz

civil-zz

    Member

  • New Member
  • PipPip
  • 17 posts
  • Name: Sergey
  • Ford Model: FFII
  • Year: 2009
  • Location: Other / Non-UK

Posted 31 March 2012 - 02:32 PM

Did you ever write a guide on some of the options available?

Shift change light activates , but it does not indicate as it should with high Revs , is there some other part that needs to be turned on for it to function?

No, there is no any guide, most of options have descriptions.. If there is no clear description it means I know nothing about it.. :D

Shift change indicator will correctly work after you reprogram PCM. Still I can't do it, this is more hard procedure than module configuring. Now without reprogramming PCM indicator will light up with engine cut-off, approximately at 6500 rpm for benzine vehicles

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users