Jump to content
Do Not Sell My Personal Information


Guide For Focus Mk2/mk2.5 C-Max/kuga ~Elm 327 Cable And Ff2 Program


Preee
 Share

Recommended Posts

Quick info - ELM modified and working so if somebody would like to make use of it in Exeter area just drop me a pm. Preee thanks once again for your support and efforts.

Link to comment
Share on other sites


Just been out and sat next to an RS500 at the traffic lights , thinking nice car m8 , but i bet you don't have Eco mode turned on :) lol

Peter , thanks to you for finding the great software , and thanks to civil-zz for writing one of them.

Link to comment
Share on other sites

Rokos have you tried it and what does it do? , is it just a scanning software or can it do anything?

Paul is a scanning software but the real time view has many parameters as quantity of each injector, preinjection and finally it can code injectors and i think keys. That is all i know. I try to connect with ELM327 but did not recognised it.

The inf. file writes

; Windows USB CDC Driver Setup File

;

[Version]

Signature="$Windows NT$"

Class=Ports

ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}

Provider=%ELMUSBN%

LayoutFile=layout.inf

DriverVer=03/26/2007,6.0.2600.7

[Manufacturer]

%MFGNAME%=VirComDevice,NT,NTamd64

[DestinationDirs]

DefaultDestDir = 12

[VirComDevice.NT]

%DESCRIPTION%=DriverInstall,USB\VID_04D8&PID_0F3E

[VirComDevice.NTamd64]

%DESCRIPTION%=DriverInstall,USB\VID_04D8&PID_0F3E

[DriverInstall.NT]

Include=mdmcpq.inf

CopyFiles=FakeModemCopyFileSection

AddReg=DriverInstall.NT.AddReg

[DriverInstall.NT.AddReg]

HKR,,DevLoader,,*ntkern

HKR,,NTMPDriver,,usbser.sys

HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[DriverInstall.NT.Services]

AddService=usbser, 0x00000002, DriverServiceInst

[DriverServiceInst]

DisplayName=%SERVICE%

ServiceType=1

StartType=3

ErrorControl=1

ServiceBinary=%12%\usbser.sys

[strings]

ELMUSBN = "ELM-USB Interface"

MFGNAME = " Ltd."

DESCRIPTION = "ELM-USB Interface"

service = "ELM-USB CDC Driver"

Link to comment
Share on other sites

Do you know which type of connector they are using to connect with it? , maybe its not an ELM327

Link to comment
Share on other sites

Quick info - ELM modified and working so if somebody would like to make use of it in Exeter area just drop me a pm. Preee thanks once again for your support and efforts.

May have to take you up on that next time i'm at Middlemoor for anything. ;)

Link to comment
Share on other sites


May have to take you up on that next time i'm at Middlemoor for anything. ;)

No problem, it will be pleasure to meet you and do some mods together :)

Link to comment
Share on other sites

Do you know which type of connector they are using to connect with it? , maybe its not an ELM327

I am not sure, maybe civill can find what type of chip is supported by the software, or He is able to modify software to recognise ELM327, You have to be a computer programmer to do those thinks...

Get a ride, is Saturday night, HAVE FUN all of you.

Goodnight from Greece.

Link to comment
Share on other sites

Thank you civil-zz.....great work !! Really appreciated...... Any plans to do Ford S Max or other models ?

Link to comment
Share on other sites

Hi! Preee

Can you translate DDM+PDM page to english? thank's you info!!

Link to comment
Share on other sites

English version is already done mate.......look back a little in this thread for download link

Link to comment
Share on other sites

Hi! Preee

Can you translate DDM+PDM page to english? thank's you info!!

Which software are you refering too ELMFF2 or ELMconfig ?

Link to comment
Share on other sites

I tried downloading and opening the english version but it says

Component 'mscomm32.ocx' or one of its dependencies not correctly registered: a file missing or invalid

can someone help please

Link to comment
Share on other sites

I tried downloading and opening the english version but it says

Component 'mscomm32.ocx' or one of its dependencies not correctly registered: a file missing or invalid

can someone help please

i had the same trouble mate,

you need to download the file and save it to your windows folder, the one in your C drive

Link to comment
Share on other sites

I tried downloading and opening the english version but it says

Component 'mscomm32.ocx' or one of its dependencies not correctly registered: a file missing or invalid

can someone help please

You need to download dll files:

http://civil.iffc.ru/ELMConfig/DllPack.zip

Unzip and run RegDLL.bat

Link to comment
Share on other sites

First! thank you provide this greate tool.

I got both them and i want to know Elm-ff2 first.

Elmconfig look powerful but complex and Elm-ff2 easy and simple. ^____^....

Link to comment
Share on other sites


i would really really love to have the global closing and global opening feature on my 5 door focus, :wub:

i have tried to activate it with the software and ELM 327,

but the windows wont work, and i only have electric windows in the front, and manual wind ups in the back,

is their any way i can trick the gem to thinking they are all electric and get it to operate the global feature. :(

also the walk me home feature,

can i activate it on my focus too??

Link to comment
Share on other sites

also the walk me home feature,

can i activate it on my focus too??

Are you sure you don't have it already?

Turn off the car and pull indicator stalk to the rear as if to flash high beams.

Lights should come on and stay lit for about one minute after the car is locked.

Have it on mine :P

Link to comment
Share on other sites

Thanks Lenny and Pidu ill try and get it done tomorrow :)

Link to comment
Share on other sites

Are you sure you don't have it already?

Turn off the car and pull indicator stalk to the rear as if to flash high beams.

Lights should come on and stay lit for about one minute after the car is locked.

Have it on mine :P

no mate,

it feels like the switch is their for it,

because when i pull it back their is two steps in it,

sort of first step flashes the headlights then further back it does nothing, but i can feel it pressing.

Link to comment
Share on other sites

Lenny did you activate it with ELMconfig?

Link to comment
Share on other sites

Lenny did you activate it with ELMconfig?

No mate,

i didnt spot it in the menus, :blink: lol

is it in one of the menu's on the ELM Config and ive missed it?

Please say Yes

Link to comment
Share on other sites

Hmmm good question Lenny i could have sworn i saw this feature looking at it so far all i can see is the delay time , under GEM page one , what is yours set on under that page?

Link to comment
Share on other sites

Hey, so I got an elm cable and switch about a week ago. Managed to rewire the cable to allow the switching function. I am a complete novice at electricals, but had no problem at all. Very easy to follow guide, thanks a lot guys :)

Link to comment
Share on other sites

Hey, so I got an elm cable and switch about a week ago. Managed to rewire the cable to allow the switching function. I am a complete novice at electricals, but had no problem at all. Very easy to follow guide, thanks a lot guys :)

Cool , so what did you turn On/Off ?

Link to comment
Share on other sites

Okay so got the auto door locking working, I think that's a really good feature. Turned on the Eco mode thing with the 'flowers', not so sure about that. The shift up light comes on with ignition for a few seconds, but doesn't come on when in high revs. I have also activated the dash display to clone the stereo and phone commands. Tried out that reverse bleeped and grr that's anoying :P

Would like to get parking sensors fitted and try to get them wired to work like oem, as they can be activated.

Overall think this is a great bit of software :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...

Forums


News


Membership