dezwez Posted December 27, 2013 Share Posted December 27, 2013 http://pages.ebay.com/link/?nav=item.view&id=121224814111good price I payed £90 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted December 27, 2013 Share Posted December 27, 2013 So, just to get facts straight- Seeing as my car is an 07 Sport I'd just need to swap wheels and use ELM Config for cruise? Or am I oversimplifying matters? Quote Link to comment Share on other sites More sharing options...
dezwez Posted December 27, 2013 Share Posted December 27, 2013 oversimplifying it you have to check that you have the wiring and right gem module its all in this very long thread or there's a post about cruse control on the forum Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 27, 2013 Share Posted December 27, 2013 I would say yes, but (perhaps its the Focus vs CMAX) it does on occasion not I have purchased myself a set of mondeo cruise buttons for a mesely £8 off eBay. The issue is that the PCM I have is an old variety and thus is not supported by ELM Config. So if you do find that on choosing your PCM (see my post at the top of the page) from the list of options results in a message that the PCM does not match the chosen type, this is likely the issue. I just need to get my hands on IDS, or another similar goody, but I wont be paying a shed load of money for it! Quote Link to comment Share on other sites More sharing options...
JW1982 Posted December 28, 2013 Share Posted December 28, 2013 I have purchased myself a set of mondeo cruise buttons for a mesely £8 off ebay.Mondeo Cruise Control buttons are not compatible with a Focus MK2/NK2.5, C-max or Kuga. The resistance signal of Mondeo buttons is different. If you want to use the Mondeo buttons it is nescessary to change all of the SMD resistors for resistors with the correct value. At the moment I am converting a new Mondeo MK4.5 steering wheel for my Focus MK2. It is a lot of work to make all of the buttons work for a Focus MK2/MK2.5 But at the end the result looks (and works) great. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 30, 2013 Share Posted December 30, 2013 Ah begger! looks like I wasted that money then :p Ah well, they will come in use to someone, somewhere :p Quote Link to comment Share on other sites More sharing options...
Mikey_ax Posted January 1, 2014 Share Posted January 1, 2014 Hello!I'm new here and have also tried to get the cruise control on my Ford Focus 1.8 FFV work. I mount all things in the car but when I use ELMconfig 0.2.10 and read information from the car so I just get an error message (ELM incorrect response from ELM to request "10 87")What's wrong? I have double checked all my soldering ELM OBD everything looks right as it should. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 2, 2014 Share Posted January 2, 2014 have you switched over the the High Speed? This error just tends to be "I cant hear anything" you might want to double check that you soldered the pins the right way, as it can often be read as the solderbucket side, or back to front looking at the pins from the front. Have you also installed the drivers correctly for the device? Quote Link to comment Share on other sites More sharing options...
Mikey_ax Posted January 2, 2014 Share Posted January 2, 2014 Yes, I've tried switching to High Speed.I've also tried with the program ELM FF2 v0.9.4.13.The program I get contact with the car but when I try to activate the cruise control it does not work afterwards.I'll try swapping the cable 11 and 3 in the OBD and see if it works.Yes I have instalera drivers for the device.I use a computer with windows 7 64bit Professional Quote Link to comment Share on other sites More sharing options...
Mikey_ax Posted January 2, 2014 Share Posted January 2, 2014 I have now I try to solder on cable 11 and 3.got the results.I have instalera Silabs program and am using ELM Config 0.2.1.3 I have just this program So far so good! Then when I press the read to see the information in the GEM it just looks like this. Have tried to switch between High speed and low speed. then when I press the read to see the information in the GEM Page3, I get error messages. see the picture. what's wrong? or what am I missing? My numer on the fuse box is 4M5T-14A073-CH.The box sits on the passenger side on the floor. Quote Link to comment Share on other sites More sharing options...
Tezza Posted January 2, 2014 Share Posted January 2, 2014 The GEM number – must end with DX (where X could be any letter - A,B or any other), for example 4M5T-14A073-DW. there has been rumours about that one person who has successfully added Cruise Control to their Ford with a "C" GEM, but it was only one case and I am not 100% sure about it. Also CC might not have been written into the PCM just like its not on the ST as I have also tried to do this mod Quote Link to comment Share on other sites More sharing options...
dezwez Posted January 2, 2014 Share Posted January 2, 2014 mine ends in c and I've got cruise Quote Link to comment Share on other sites More sharing options...
dezwez Posted January 2, 2014 Share Posted January 2, 2014 I have now I try to solder on cable 11 and 3. got the results. I have instalera Silabs program and am using ELM Config 0.2.1.3 I have just this program So far so good! Then when I press the read to see the information in the GEM it just looks like this. Have tried to switch between High speed and low speed. then when I press the read to see the information in the GEM Page3, I get error messages. see the picture. what's wrong? or what am I missing? My numer on the fuse box is 4M5T-14A073-CH. The box sits on the passenger side on the floor. take a look at 6 and 14 many be wrong way your in high cam but not low cam Quote Link to comment Share on other sites More sharing options...
Tezza Posted January 2, 2014 Share Posted January 2, 2014 mine ends in c and I've got cruise. . So the last 2 letter on your PJB is CC ? I would check that :) And I would say your fuse box starts 7M5T-14A073 Back in 2008 ford in there wisdom decided to make just one PJB that had the capability to open all the features that was offered to the ford focus, and features were enabled specifically to each model/option sold. Quote Link to comment Share on other sites More sharing options...
dezwez Posted January 2, 2014 Share Posted January 2, 2014 gem unit ends in cc just looked at the number Quote Link to comment Share on other sites More sharing options...
Tezza Posted January 2, 2014 Share Posted January 2, 2014 gem unit ends in cc just looked at the number But does yours start 7M5T-14A073 ? Quote Link to comment Share on other sites More sharing options...
Cragrat Posted January 2, 2014 Share Posted January 2, 2014 Hi Mikey, Check out my post on page 22. My Gem ended in CF but it's a completly different part number, 7M5T-14A073-CF. Quote Link to comment Share on other sites More sharing options...
jarp Posted January 2, 2014 Share Posted January 2, 2014 . . So the last 2 letter on your PJB is CC ? I would check that :) And I would say your fuse box starts 7M5T-14A073 Back in 2008 ford in there wisdom decided to make just one PJB that had the capability to open all the features that was offered to the ford focus, and features were enabled specifically to each model/option sold. My GEM is 4M5T-14A073-CD and I successfully enabled CC... Edit: It is year 2005 left hand drive Focus mk2. Quote Link to comment Share on other sites More sharing options...
Tezza Posted January 2, 2014 Share Posted January 2, 2014 My GEM is 4M5T-14A073-CD and I successfully enabled CC... Edit: It is year 2005 Focus mk2. What model focus do you have ie ghia etc also what optional extras are fitted to your focus if any ? Quote Link to comment Share on other sites More sharing options...
Mikey_ax Posted January 2, 2014 Share Posted January 2, 2014 Hello again!Will now try swapping the cable 14 and 6. we'll see if that helps.The only thing I can think of that I have ancestry Lund is that I have a 2-pole ON-ON button.I have read that people use a 2-pole ON-OFF-ON switch.But what's different? Quote Link to comment Share on other sites More sharing options...
dezwez Posted January 2, 2014 Share Posted January 2, 2014 What model focus do you have ie ghia etc also what optional extras are fitted to your focus if any ?TEZZA just looked and mine is a 7M5T-14A073-CC mk 2.5 zetec 1 Quote Link to comment Share on other sites More sharing options...
Tezza Posted January 2, 2014 Share Posted January 2, 2014 TEZZA just looked and mine is a 7M5T-14A073-CC mk 2.5 zetec Yes the latest gem :) like I said ford only make the 1 type now as before there was 3 types made Quote Link to comment Share on other sites More sharing options...
jarp Posted January 2, 2014 Share Posted January 2, 2014 What model focus do you have ie ghia etc also what optional extras are fitted to your focus if any ? From FordEtis: Focus 04-08/Focus C-MAX 03-07, 1.6L Duratec-16V Ti-VCT (115/120PS), Jeans (Metallic) Primary Features: Build Date: 27.02.2005 Vehicle Line: Focus 04-08/Focus C-MAX 03-07 Body Style: 4 Door Estate Version: Series 32 Engine: 1.6L Duratec-16V Ti-VCT (115/120PS) Transmission: 5 Speed Manual Transaxle - B5/IB5 Drive: LHD FWD Emission: Stage IV Emissions Air Conditioning: Manual Air Conditioning Territory: (+)"SF" Paint: Jeans (Metallic) Interior Fabric: Humy / Mondus / Dark Flint Minor Features: Saarlouis Plant Built Security Lock Group No.1 With Convenience Group Less Marketing Flex Prep Pack Less SVO Application/Label Marketing Level 1 Less Electronic Stability Control Less Global/Auto Closing Power Front Windows One Touch Down With Manual Rear Windows With Tinted Glass All Round Less Windshield Heat Shielding Less Heated Windscreen Less Temp Controlled Glove Box Less Overhead Console With Small Floor Console Less Front Floor mats Less Rear Floor mats Less Load Area Cover With Load Floor Carpet Less roof rack With Dipping Rear View Mirror Drivers Power Heated Convex Mirror With Pass Convex Elec/Heated Mirror With Rear Center Head Restraint Less Driver Seat Lumbar Support With Drivers Heated Seat With Heated Passenger Seat With Driver 4 Way Mnl.Seat Adjuster With Pass 2 Way Manual Seat Adjust Less Trailer Coupling Ignition Key With Remote Unit With Moulded Gearshift Knob With Central Locking System Less Door Entry Remote Control Unit With Variable Intermittent Windscreen wiper With Headlamp Washer Less Sun Roof Air Curtain Restrnt LH Air Curtain Restrnt RH With Driver Air Bag With Passenger Air Bag With Side Air Bag - Drivers Side With Side Air Bag - Passenger Side Less Isofix Hard Point Attach With Mini Steel Spare Wheel With Load Levelling Rear Shocks 6J x 15 Steel Wheel 195/65VR x 15 Tyres 15" Mid Wheel Cover - Style C Non Locking Lug Nuts With Standard Suspension With Mechanical Parking Brake Less Brake Emergency Assist With Brake Emergency Assist Less Anti-Lock Braking System 4 Wheel Anti-Lock Braking System Less Skid Plates Standard Front Seat With Fixed Foot Pedals Less Auxiliary Heater With KMH Speedometer Less Radio Pre-Equipment Pack (+)RDS Less A/V Jack With Centre Antenna ICE-Low Level CD + AM/FM Radio ICE Feature Pack 20 With 6 Speakers Less Family Entertainment System With Column Stalk Radio Controls Less Smokers Package With Halogen Headlamp Less Headlamp Control Sorry for long list, I am not first owner so I have no idea what was standard and what was extras were bought... Quote Link to comment Share on other sites More sharing options...
dezwez Posted January 2, 2014 Share Posted January 2, 2014 Yes the latest gem :) like I said ford only make the 1 type now as before there was 3 types maderight I see so he may not get cc on that gem then Quote Link to comment Share on other sites More sharing options...
dezwez Posted January 2, 2014 Share Posted January 2, 2014 Hello again! Will now try swapping the cable 14 and 6. we'll see if that helps. The only thing I can think of that I have ancestry Lund is that I have a 2-pole ON-ON button. I have read that people use a 2-pole ON-OFF-ON switch. But what's different? the switch I use have 6 pins on off on three pins down each side Quote Link to comment Share on other sites More sharing options...
.thumb.png.327e57655a9a82472089ef077ae02c11.png)
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.