Jump to content
Do Not Sell My Personal Information


Guide For Focus Mk2/mk2.5 C-Max/kuga ~Elm 327 Cable And Ff2 Program


Preee
 Share

Recommended Posts


Hi Brazh. Thanks for your offer.

The following are the current phrases I could not understand. I used Google Translate for the translation and something just did not come out understandable lol. Was gonna try them on the car one by one when the ELM cable arrives but I guess you could help me :)))

I don't have Fusion and I'm not Russian (neither English :D ), but I'll try :)

From the GEM page

0ткрывание багажника с ДЧ - boot opening from remote controller (key)

0ткрывание багажника при вкл эажиегании - boot opening when ignition is ON (????)

0ткрываь багажника двойным нажатием ДЧ - boot opening with remote double press

Концевики

Опция датчик цожця / света - rain/light sensor option

Настройка через ВК (Запрет щаманства) - set up with board computer

Выстрые замки (отменяет хитрые замки)

Дожиматв замки, если были открыты двери - relocking (if doors were opened)

Зацний дворник при задней передаче - rear wiper when reversing

Колесико регулировки прер. режи. дрворн.

Три вспышки поворотов при перестроении

Длинный импульс хлыста или хитрые замки

From the ACM page

Мгновенный расход - instant fuel consumption

Кривая луцеколонка

Мгновенный расход - instant fuel consumption

Индикатор открытой дверм (без ВК) - open door indicator (without BC) -> BC=Board Computer

Настройка уерез ВК (запрет шаманства)

Сигнализатор заднего хода - warning of reversing (or reverse warning)

Праворульный атво - right hand drive (RHD) car

Доп настройки для ВК - additional settings for BC

  • Like 1
Link to comment
Share on other sites

Thanks mayak. BC is the trip computer? the ones with the reset button?

Thanks

Link to comment
Share on other sites

board or trip computer - IMO it's the same: displays average consumption, speed, range to empty tank, instantaneous fuel consumption etc

Link to comment
Share on other sites


Zurrieq,

From the GEM page

Центральный замок Central lock

Открывание багажника с ДУ Trunk unlock with remote control

Открывание багажника при вкл зажигании Lock the trunk while ignition is on

Открывать багажник с двойным нажатием ДУ Trunk unlock with double button press

Концевики Limit switches (End switches)


Опции Options

Опция датчик дождя/света Rainsensor/Autolamps

Настройка через БК (Запрет шаманства) Setting via board computer (if OFF when cannot change options via board comp)

Быстрые замки (отменяет хитрые замки) Fast and quiet locks

Дожимать замки, если были открыты двери Relock if doors were opened

Задний дворник при задней передаче Rear wiper ON when reverse

Колесико регулировки прерывистого режима

дворников Rear wiper regulated with setting dial

Три вспышки поворотов при перестроении Triple flash turning lights when lane change

Длинный импульс хлыста или хитрые замки (Cannot find it in program window :) )

From the ACM page

Мгновенный расход Instant fuel consumption

Кривая луцеколонка Not linear fuel gauge (unknown option)

Индикатор открытой двери (без БК) Door ajar warning (without board comp)

Настройка через БК (Запрет шаманства) Setting via board computer

Сигнализатор заднего хода Reverse warning

Праворульный авто Right hand drive

Доп настройки для БК Additional options


БК board computer

ДУ remote control

I’ve tried to translate this but Russian programmer has a great sense of humor, so some phrases are untranslatable. Some phrases are cannot be translated in a few words so you may ask me what exactly not understandable

Link to comment
Share on other sites

anyone selling the whole kit and software modified with all info ready to go?

Link to comment
Share on other sites

Длинный импульс хлыста или хитрые замки - it may be long pulse or 'tricky' abstruse locks Long pulse of signal when locking? Хитрые - maybe in advanced meaning

Link to comment
Share on other sites

Открывание багажника при вкл зажигании Lock the trunk while ignition is on

Unlock :)

Колесико регулировки прерывистого режима дворников Rear wiper regulated with setting dial

rather not rear, but front wipers (or just wipers)

Link to comment
Share on other sites

mayak,

you are absolutely right

my head hurts of the translation. Very jolly programmer wrote this soft :)

Link to comment
Share on other sites

Good news guys!! FFN works on the fiesta!! Though since i dont understand russian i dont know what the test pages do but i managed to peogram both gem and ipc

Link to comment
Share on other sites

Anyone knows if there is an option to remove deadlocking from the GEM? If yes which one

Thanks

Link to comment
Share on other sites

Hi

What is Двойное запирание? According to google translate it is dual lock? Does it disable deadlocking? I tried it (i don't have deadlocking motors) although the locking sound seems different the indicators do not flash when the car is locked.

Thanks

Also I found one small problem.

When I use FFN it seems the RCM is losing connection with the IPC (according to Forscan). Not really big since a test on Forscan and delete the DTC all gets back to normal.

Btw I have a fiesta

Link to comment
Share on other sites

Hi

What is Двойное запирание?

Двойное запирание - locking a door with blocking from inside opening. It seems to me it is deadlocking.

Link to comment
Share on other sites


very interesting to see that this works on a Fiesta :) , has anyone tried on a Mk7 2011 ?

Link to comment
Share on other sites

very interesting to see that this works on a Fiesta :) , has anyone tried on a Mk7 2011 ?

for sure it won't

Link to comment
Share on other sites

for sure it won't

Ah thats a pity, when i saw a new program FFN working on the Fusion i had a glimmer of hope lol

Link to comment
Share on other sites

The only problem i found is that when writing to the GEM it loses comunication to the the IPC and obviously brings up a DTC on the IPC. Don't know if it meant to happen. No big deal though since I made sure it is due to the program and not a fault in my car

Thanks

Link to comment
Share on other sites

Once i get the Translation sorted for FFN , i'm going to take a look see if it works

Link to comment
Share on other sites

Ill help test it if need be. The russian works well so i am sure the english will :))

Link to comment
Share on other sites

Hi all does anyone know where I can download the calibration files for my ecu its 6u71-12a650-ha

There is no calibration files on the Russian site.

Its a SID 202 5ws40305a-t 07-07-05

Thanks

Link to comment
Share on other sites

for 1.8 tdci with SID202 there is only one file in Civil's table: 8M51-12A650-AXA - maybe it's just newer version of your 6u71-12a650-ha

Link to comment
Share on other sites

if i load elmconfig the firmware i see is

4m51-12a650-jn or 4m51jn software update 24.03.2006

Thanks

Link to comment
Share on other sites

My native firmware was 6M51-12A650-YB and now it is 8M51-AHA from civil-zz's page (just a bit tuned later). It's for sid202 1.8 TDCi and you may try it. There is no difference in calibration maps but strategy is not the same.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...

Forums


News


Membership