Jump to content


Photo

Headlight Bezel


  • Please log in to reply
4 replies to this topic

#1 Chriiiiiiiis

Chriiiiiiiis

    Member

  • New Member
  • PipPip
  • 16 posts
  • Ford Model: Fiesta MK7
  • Location:

Posted 14 March 2012 - 10:38 PM

I want to fit daytime running lights to my 2012 Titanium. I was going to buy these: http://www.amazon.co...s/dp/B005QXKBZK, but realised that DRLs are standard on Titanium X.

Is there somewhere that I could just buy the Titanium X headlight bezel?

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 tomo2001

tomo2001

    Serial Poster

  • Budding Enthusiast
  • PipPipPipPip
  • 485 posts
  • Name: Paul
  • Ford Model: Ford Focus 1.6 TDCi Titanium X
  • Year: 2011
  • Location: Yorkshire

Posted 14 March 2012 - 10:49 PM

Bit more to it than that I'm afraid. Tit X headlights are Bi-Xenon's so you will need the legally required headlight washers as well, so new bumper - loads of work and expense.

#3 Chriiiiiiiis

Chriiiiiiiis

    Member

  • New Member
  • PipPip
  • 16 posts
  • Ford Model: Fiesta MK7
  • Location:

Posted 14 March 2012 - 11:21 PM

I dont mind driving around without washers - no ones going to notice or care.

The MOT test only says if washers and autolevelling are present they must work.

#4 artscot79

artscot79

    Ford Enthusiast

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 7,995 posts
  • Name: arthur
  • Ford Model: focus mk2 ti-vct
  • Year: 2006
  • Location: Fife

Posted 15 March 2012 - 05:45 AM

its ok saying that but ill gaurantee they wont pass it bi xenons must have the washers its a legal requirement and therefore must be fitted so as said they will fit however you will need the relay and the washers the bumper.
www.pistonheads.com/gassing/topic.asp?h=0&t=487124

have a read halfway down

#5 ukphillad

ukphillad

    Feet Under The Table

  • New Member
  • PipPipPipPip
  • 124 posts
  • Name: Phil
  • Ford Model: 1.4 Style
  • Year: 2008
  • Location: Dublin

Posted 15 March 2012 - 02:34 PM

its ok saying that but ill gaurantee they wont pass it bi xenons must have the washers its a legal requirement and therefore must be fitted so as said they will fit however you will need the relay and the washers the bumper.
www.pistonheads.com/gassing/topic.asp?h=0&t=487124

have a read halfway down


It's ok saying that as well, but if it's a 2012 Titanium you will be fine fitting them. Simple solution is just to take them out before the MOT and then fit them right back in after the MOT. See the Police won't really care as long as they aren't blinding drivers. By fitting items like that into your car, you show that you take pride in your car and it's your Joy!! Not everything has to be legal, sure how many times some of you have done 40mph in a 30 zone!! That's illegal as well innit? So Chriiiis IMO, go ahead and fit those bad boys in :) :)


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users