Engine Management Light
Posted 15 March 2012 - 12:54 AM
Was ok before the test any ideas please.
Thanks for looking.
Posted 15 March 2012 - 01:33 PM
If its the TDCI they will do a high rev test to measure the emissions for the MOT.
If you dont do high rev work often, that extra flow could move some crud along the fuel pipes and block the fuel filter. There is no sensor to test for filter blockage or LP faults.
The first pressure sensor is just before the injectors and that's the one that will put on the fault light if the injector pressure is below requirement due a filter block.
You should really get the codes read, as fuel is not the only thing that lights the dash. If it is a fuel pressure code the filter is your obvious first port of call.
Posted 15 March 2012 - 03:29 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users